Top Sintering Process Reviews

OKVEQUIP 3PCS 4Inch Super Thin Diamond Saw Blade Dry or Wet Tile Ceramic Disc Wheel Porcelain Cutting Discs for Marble Quartz Granite

【Tile Blade Widely Use】: Ceramic tile blade cutting discs can cut porcelain, vitrified tiles, ceramic tiles and thinner granite, marble, etc. quickly and accurately..
【Features】: Diamond tile blade fast cutting, small kerf, low power consumption, sharp and wear-resistant,using hot pressing sintering process, can be used for a long time.
【Applicable type】：Concrete cutting machine saw blade can be used for dry/wet cutting.
【Adapted machine】: Cutting marble granite porcelain tile can be used with marble machine, desktop cutting machine, angle grinder.
【Ceramic cutting disc wheel parameters】: size 105x20x10MM, outer diameter 105MM, inner diameter 20MM, with washer to change 16MM, thickness 1.2MM, RPM2000-8000.

Check Stock

shernbao Extreme-Edge Series Pet Clipper Blade, Made of Japanese High-Carbon Steel Mixing Trace Amounts of Chrome-Vanadium (Crm65), Compatible with Most Andis, Oster, Wahl A5 Clippers (10# 1.6mm)

Made of Japanese high-carbon steel mixing trace amounts of Chrome-Vanadium (Crm65) and over 60HRc, super hard and sharp.
Adopt the latest technology of powder metallurgy and ceramic sintering process.
Hard and very sharp with super smooth cutting, lasting performance and durability；Smooth cut finish。.
Fit most A-5 style detachable blade clippers like Andis, AG, MBG, AGC, Oster, Wahl, Heiniger, Aesculap, etc..
Clean your blade after use and oil every 10 minutes.

Check Stock

GPAIHOMRY 80cm Round Sintered Stone Coffee Table, Metal Structure & Reinforced Frame for Living Room, Dining Room, Apartment, Small Space

【The new type of natural sintering is the tabletop】the sintered stone is made of natural stone, calcined at high temperature and high pressure, retaining the clear texture and hard texture of marble, and discarding the thickness of marble..
【Sturdy and safe】This chic table frame is made of high-quality gold-plated stainless steel, sturdy and durable, and can maintain leverage on various floors..
【Soft microfiber leather】The space surface of the table is covered with a layer of microfiber leather. The super-fiber leather is wrapped in a folding process to create a three-dimensional texture that is delicate, wear-resistant and breathable, and is as smooth as the skin..
【Removable】The combination design of small coffee table and large coffee table, two independent coffee tables can be moved at will or can be used as independent side tables..
【Versatile】This coffee table is built of lightweight structure and comes with decent size, which is convenient to move around as changing needs, ideal for the living room, office, apartment and small space..

Check Stock

Size 40/30/10/7FC/5FC/4FC/3FC Detachable Pet Dog Grooming Clipper Ceramic Blades Set,Compatible with Andis,Oster A5,Wahl KM10 Series Clippers,Cut Length 1/100"(0.25mm) to 1/2"(13mm),7 Pack

... Titanium-coating Ceramic,Blade sharp and strong hardness, water will not rust. It is more heat resistant than traditional carbon steel process and has less noise when used.
▶【Profession Technology】:The blade adopts the latest powder metallurgy technology and ceramic sintering process.
▶【CUSTORM SUPPORTS】:If blade set that you purchase fails to fit your machine, please contact customer service and we will reply within 24 hours, we will arrange free of charge or refund.

Check Stock

Clevite MS-2199P Engine Crankshaft Main Bearing Set

Manufactured from cast copper-lead, increases fatigue strength by approximately 20% compared to powdered metal processes, referred to as sintering, which is used by the competition.
Provides a margin of forgiveness for vehicles that don't get maintenance service as often as they should.
Additional embed ability makes it a good choice for older engines.
Manufactured to meet or exceed OE specifications.

Check Stock

Clevite MS-2202P Engine Crankshaft Main Bearing Set

Manufactured from cast copper-lead, increases fatigue strength by approximately 20% compared to powdered metal processes, referred to as sintering, which is used by the competition.
Provides a margin of forgiveness for vehicles that don't get maintenance service as often as they should.
Additional embed ability makes it a good choice for older engines.
Manufactured to meet or exceed OE specifications.

Check Stock

Clevite MS-2328P Engine Crankshaft Main Bearing Set

Manufactured from cast copper-lead, increases fatigue strength by approximately 20% compared to powdered metal processes, referred to as sintering, which is used by the competition.
Provides a margin of forgiveness for vehicles that don't get maintenance service as often as they should.
Additional embed ability makes it a good choice for older engines.
Manufactured to meet or exceed OE specifications.

Check Stock

Clevite MS-2034P Engine Crankshaft Main Bearing Set

Manufactured from cast copper-lead, increases fatigue strength by approximately 20% compared to powdered metal processes, referred to as sintering, which is used by the competition.
Provides a margin of forgiveness for vehicles that don't get maintenance service as often as they should.
Additional embed ability makes it a good choice for older engines.
Manufactured to meet or exceed OE specifications.

Check Stock

Mudder 4 Pieces Round Air Stone Disc Hydroponics Pump Bubble Diffuser Release Tool for Aquarium with 12 Pieces Suction Cups Fish Tank Aerator Air Stone Kit

...24 – 59 inch fish tank, fits for tube of 3/ 16 inch and 3/ 8 inch inner diameter.
Recommended air pump power ranges from 4W to 8W (works best with 8W air pump), standard pressure is 0.01 MPa, max pressure is 0.012 MPa.
Quality and safe materials: made of quality and non-toxic mineral material with high temperature sintering process, these air stone bubblers are sturdy and durable.
They can produce fine bubbles for oxygen replacement and lower CO2 levels, safe for fishes to live in.
Versatile and widely applicable: the aerator diffuser is suitable for hydroponic systems, ponds, fish tanks, freshwater/ saltwater aquariums and other systems, helping extend the life of your nutrient solution, keep fish/ roots healthy and promote plant growth.
Note: the bubble diffuser disc can be soaked for 2 hours before being applied for the first time and the hose connected to the air pump can be repeatedly plugged and unplugged more than 4 times, which can help the air bubbles to be more uniform, clean regularly by a brush as they get clogged after weeks or months of usage.

Check Stock

Hard Tungsten Steel Ball, Alloy Steel Ball, Extrusion Ball, YG6 Tungsten Steel Ball, YG8 Alloy Ball, 13.01mm-13.1mm Diameter, 1PCS,13.06mm*1PCS

Process flow milling → formulating according to the requirements of the application → wetting → mixing → pulverization → drying → adding molding agent after the festival → drying → the mixture obtained after the festival → granulation → cold isostatic pressing → molding → Sintering → forming (blank) → packaging → storage.
Hook steel ball has a wide range of applications, such as: precision bearings, instruments, meters, pens, spraying machines, water mulberries, mechanical accessories, sealing cabinets, pump making, punching holes, oil fields, hydrochloric acid laboratories, hardness measuring instruments, High-end industries such as Huaiu, counterweight, decoration, finishing, etc., 10-20 years as new, high hardness can reach about 93 degrees.
Application: hardness tester, measuring head, high pressure seal, punching and drawing of precision parts, precision bearing, high temperature resistance and corrosion resistance.

Check Stock

Pure Tungsten Rod 0.5\ Diameter X 36\ Long, Polished

PURE 99.95% Tungsten (W) Rod shipped to you free via Amazon Prime!.
SIZE: 0.25" dia. x 20" length with tolerance: (-0/+0.003" dia.) (-0" length).
QUALITY manufacturing via pressing and sintering, all rods are lot controlled, stress relieved, and conform to ASTM B760.
FREE material cert will be provided with in safely packaged shipment.
UNITED STATES based manufacturing & customer service staff are here to help you.

Check Stock

Clevite MS-2199HK Engine Crankshaft Main Bearing Set

Manufactured from cast copper-lead, increases fatigue strength by approximately 20% compared to powdered metal processes, referred to as sintering, which is used by the competition.
H-Series bearings are narrowed for greater crankshaft fillet clearance.
All H-Series bearings are made in Atlantic, Iowa USA.
High crush for better seating and retention.
Un-plated hardened steel backing for better dimensional accuracy and bore contact.

Check Stock

Clevite MS-909A-10 Engine Crankshaft Main Bearing Set

Manufactured from cast copper-lead, increases fatigue strength by approximately 20% compared to powdered metal processes, referred to as sintering, which is used by the competition.
Relatively harder aluminum alloy wears well, interacts closely with journal surfaces for strength.
Recommended for use with nodular iron crankshafts.
Manufactured with 100% bored inside diameters for optimum surface characteristics and consistent precision.
Manufactured to meet or exceed OE specifications.

Check Stock