Top Single phase Voltage Relay Reviews

EATON CUTLER HAMMER - XTOB040DC1 - OVERLOAD RELAY

  • APPLICABLE OCCASIONS: Suitable for power systems with rated isolation voltage up to 690V and circuit 50-60hz..
  • PRODUCT FUNCTION: This relay can be used as an overload protection for long-term or indirect long-term maintenance of the motor..
  • FUNCTION: This relay is used for protecting the phase break when the electric motor is overload..
  • VERSATILE: The relay has different mechanism and temperature compensation..
  • EASY TO OPERATE: With phase break protection, manual and automatic reset, temperature compensation, trip indication, test button and stop button..
Check Stock

SSR-100DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 100A

  • Model: SSR-100DD, single phase Solid State Relay 100A DC to DC control, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 100 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

SSR-25DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 25A

  • Model: SSR-25DD, single phase Solid State Relay 25A DC to DC control, UL Approved, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 25 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

Siemens 3UG4512-1BR20 Monitoring Relay, Three Phase Voltage, Insulation Monitoring, 22.5mm Width, Screw Terminal, 2 CO Contacts, Delay Time, 160-690 Line Supply Voltage

  • Convenient Monitoring: The voltage relay can monitor its own operating voltage (true rms measurement)..
  • High Accuracy: The voltage relay has 8 adjustable rated voltages, and the voltage measurement accuracy is less than 1%..
  • Application: Equipment protection and control (tower cranes, elevators, agricultural equipment, refrigerated trucks).
  • LED Indicator: The working status of the voltage control relay is indicated by the LED indicator..
  • Small Size and Easy to Install: The voltage protection relay is ultra-small and can be mounted on a 35mm DIN rail..
Check Stock

Relay, NR2-36 Electric Heat Protect Thermal Overload Relay 23-32A Motor Protector Electric Authorized Thermal Accessory

  • HIGH-QUALITY MATERIALS: We guarantee that all thermal relays are made of high quality materials and have a long service life..
  • RATED RANGE: This thermal relay can be used in the circuit of 50-60hz, the rated insulation voltage is 690V..
  • GOOD PROTECTION: The relay is used for protecting the phase break when the electric motor is overload..
  • HIGH EFFICIENCY: The relay has different mechanism and temperature compensation, with high efficiency and excellent performance..
  • SPECIFIC FUNCTION: The overload protection relay has phase break protection, manual and automatic reset, temperature compensation, trip indication, test button, stop button..
Check Stock

3-Phase Voltage Monitoring Relay AC 220-440V Phase Sequence Protection Small Size Protection for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Voltage Monitoring Relay Phase Sequence Protection TG30S Phase Sequence Relay 3-Phase Mini for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Voltage Monitoring Relay Protection 3-Phase AC 220-440V Small Size Phase Sequence Protection Phase Sequence Relay for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

TG30S Mini AC 220-440V Voltage Monitoring Relay Phase Sequence Protection Protection 3-Phase Phase Sequence Relay for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

ATO Phase Voltage Monitoring Sequence Relay 1 Phase Voltage Protection Relay Under Over Voltage with 1 CO + 1 NC Contacts AC/DC 24-48V

  • 【Measuring Circuit】Phase sequence protection relay is compatible with AC and DC supply, the rated voltage is AC/DC 24-48V.
  • 【High-quality Product】LCD display indicating voltage, operation and fault status, adjustable reset mode: automatic/manual/automatic with power-on delay reset, fault recording for the lately 3 faults.
  • 【Mutiple Functions】Adjustable overvoltage and undervoltage threshold, independent adjustable delay time for over-voltage, under-voltage.
  • 【Output Contacts】Monitoring relay with 1 CO + 1 NC contacts, and the capacity is 6A, 250V AC (resistive load).
  • 【Wide Applications】Voltage monitoring sequence relay can be applied in equipment or devices from undervoltage and overvoltage in the applications like air compressors, electric motors, pumps, fans, air-conditioning system, blowers, elevators, cranes, refrigeration equipment, laser equipment, industrial control system, etc..
Check Stock

Mini AC 220-440V TG30S Phase Sequence Protection Voltage Monitoring Relay Voltage Phase Protective Relay Building Electronics Projects for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

GRV8-03 Monitoring Relay, 176V-552V Ultrasmall Three Phase Voltage Relay Voltage Monitoring Relay Adjust for Mobile Device Connection Control(M265)

  • Small Size: 2021 Improved Version, This 3-Phase Monitoring Relay has a smaller compact size for easier and convenient use and install, and the size of the Monitoring Relay is 8.1 x 6.7 x 1.75 cm/3.1 x 2.6 x 0.6 inch, you can install it on any places around the room, saving a lot of place.
  • Multi-functioanl: This DPA51CM44 3-Phase Monitoring Relay has a widely use on the electric filed, and it can be applied to motor protection, elevator, air conditioning system, power system and other industries, very helpful tool during daily life.
  • Work Well: DPA51CM44 3-Phase Monitoring Relay features with strong anti-interference performance, so it helps maintain a constant and efficient work of the motor, it will provide an excellent performance during the working process.
  • 3-Phase Design: This Current Monitoring Relay is designed with 3-Phase Monitoring Relay to provide a correct phase sequence, without neutral, phase Loss and Incorrect phase sequence, so it can detect when all phases are present and have the correct sequence.
  • LED Indication: This DPA51CM44 Monitoring Relay features an LED indication for easier installation and trouble shooting, which permits a maximum degree of protection to be achieved for machines, plants and systems, and avoid far more significant....
Check Stock

NR2-25 Professional Thermal Overload Relay Electric Thermal Relay with Adjustable Motor Protection(17-25A)

  • Durable to use ::It is made of quality material, and it is durable to use..
  • Practical to use ::This thermal relay can be used in the circuit of 50-60hz, rated insulation voltage 690V..
  • Professional protection function ::It is used for protecting the phase break when the electric motor is overload..
  • Different mechanism and temperature compensation ::The relay features different mechanism and temperature compensation..
  • Excellent design ::It is designed with phase break protection, manual and automatic reset, temperature compensation, trip indication, test button, and stop button..
Check Stock