Top Single Phase Electricity Meter Reviews

BAYM 10pcs/Box 5(32) A 120V 60HZ Single Phase Din Rail KWH Watt Hour Din-Rail Energy Meter LCD KWH 32A

• Measuring Energy Range:9999999.1kwh Counter :7+1 digits.
• Dimensions: 116*59*17.5mm=4.5*2.3*0.68 inch(H*D*W).
• Package included:1pc of Din rail single phase two wire energy meter & 1pc of User manual (English version).

Electric kWh Meter, 100A 120/240 Volt, 3-Wire, 60Hz

• ELECTRIC METER – State-of-the-art, fully solid-state kWh meter with 800 pulse per kWh pulse output..
• SINGLE PHASE – Up to 100 amps, 120/240-volt, 3-wire, 60Hz..
• ACCURATE – 1% accuracy class, LCD readout in hundredths of a kWh, to 99999.99 kWh..
• COMPACT – Simple DIN-rail mounting designed for symmetrical load..
• LCD DISPLAY – Non-resettable LCD display. Usage data is maintained through power outages..

Extech PQ2071 True RMS 1/3 Phase 1000A AC Power Clamp Meter

• Meter operates as a True RMS Clamp Meter, Power Meter, Multimeter, and AC Voltage Detector.
• Measures AC Current, Voltage, Frequency and Power including True Power, Apparent Power, Reactive Power and Active Power.
• Measures 1-Phase/ balanced 3-Phase True Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Active Power (kWh),plus Power Factor/ Phase Angle.
• Large dual backlit LCD display (9999 count) with bargraph.

Baomain DDS238-4 （30-100）Single Phase DIN-Rail Kilowatt Hour kwh Meter 220V 100A

• Rate Voltage:220V 230V 240V Rate Current:30(100A).
• 220V Single Phase DIN-rail Kilowatt Hour kwh Meter.
• Insulation Performance:AC voltage 2KV for 1 minute,impulse voltage 6KV.
• Accuracy Class:Class 1 Starting Current:0.4%lb.
• 35mm standard DIN rail installation,complying with standard DIN EN5002.

DC Motor Speed Controller AC 110V Input DC 24V-90V Output Motor Speed Controller Switch Electric Speed Regulator for Permanent Magnet DC Motor 400W DC-51

• High Precision:Motor speed controller 36V has small size, high precision, wide speed controlling range, low power consumption and long service life.
• Size: 11.2 × 10 × 6cm/4.4 × 3.9 × 2.3inch.
• Single Phase Controller:This DC motor speed controller 24V is only suitable for the motor below 1800rpm. A single-phase asynchronous motor speed controller and can be used for 24V, 36V, 90V DC motors. Input Voltage: AC 110V.
• Wide Application:Adjustable DC motor speed controller 90V can be widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.
• High Quality Circuit Board:This motor speed controller 24V uses high quality electronic circuit and integrated components, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
• Fast To Respond:DC motor speed controller is used with single-phase asynchronous motor to realize feedback constant speed and stepless speed regulation. It feels smooth and has good durability.

Hathdia Soil Moisture Meter,Plant Hygrometer Moisture Sensor Plant Water Monitor for Potted Plants,Garden,Farm, Lawn(No Battery Needed)

• Soil Moisture Meter: This single probe soil moisture meter is specially designed for testing the moisture level in the soil, helps you decide whether the plants need water or not, helps to keep plants alive..
• Easy to Use:No batteries or electricity needed,just insert the water meter probe into the soil to the plant root level, the indicator pointer will show you the readings immediately..
• Accurate and Reliable: Single probe sensor is very sensitive, pointer on the dial moves quickly and display accurate values when testing soil moisture. 7.6” long probe is also suitable for large potted plants..
• Portable & Lightweight：This soil hygrometer can be used both indoors and outdoors, with its portable and compact design, you can test at any time any place as you want.This soil moisture meter is a great handy tool for potted plants, garden, farm, lawn plant care..
• Warm Prompt: This meter is designed for soil only, can not be used to test water or other liquid directly. Please not let the probe touch stones while inserting,please wipe the probe after each use.Any problem please feel free to contact us at the first time..

Siemens MM0202B1200 200-Amp Meter Main Combination

Fitinoch Rechargeable 14505 Li-ion Battery with Charger, 800mAh 3.7V AA Battery, ER14505 AA 3.6V Lithium Batteries Replacement for Flashlight,Water Meter 4 Pack

• ✅【RECHARGEABLE AND MONEY SAVING】Our Rechargeable 14505 battery with 1000+ cycles can save you big money comparing with the single use battery.
• ✅【ENERGY SAVING & ECO FRIENDLY】Mercury, cadmium and lead are not used in these lithium 14505 batteries, More environmentally friendly than the single use battery.
• ✅【EASY & FAST CHARGE】Easy and fast full charge in about 2 hours with charger, just simply plug into USB ports..
• ✅【HIGH PERFORMANCE】800mAh Long-lasting batteries provide reliable power support for your daily use and emergencies..
• ✅【APPLICATION】Flashlight,home automation sensors, door opening detector, temperature sensor, home alarm, bark collar, door sensor, remote control alarm, water meter, electricity meter, gas meter, medical equipment, flashlight, backup power etc.

Universal Electric kWh Meter – Omnimeter I v.3

• Universal Smart Meter – Works on any electrical system up to 480V.
• Submeter Any Electrical Load and Read the Results Over the Web.
• 120 to 480 volts — 100 to 5,000 amps — 50 or 60Hz.
• 1-phase or 3-phase — Accurate to 0.5% — Wide Selection of CTs.
• The Best Communicating Smart Meter for the Lowest Price — CTs NOT Included in Price.

Eyedro Home Energy Monitor | Solar Energy & Net Metering | Save Money on Electricity | Track Power Use via My.Eyedro.com (No Fee) | Bills & Reports | Real-Time Energy Data & History | EYEFI-2 (WIFI)

• MONITOR YOUR SOLAR USAGE with the EYEFI-2 and its Two 200A Sensors. Check your solar usage to minimize electricity usage and maximize solar use. The EYEFI-2 supports Solar and Net Metering. Uses North American Power Supply (120VAC). The EYEFI-2 includes a Module, 2 Sensors and a North American Power Adapter..
• YOUR ELECTRICITY, YOUR WAY! My Eyedro is the most detailed and reliable source to view your usage. You can customize the rate to match your utility. The EYEFI-2 is a Single phase Electricity Monitor..

Electric Meter, KWh Meter, Single Phase 4P LED din Rail Electricity Power Consumption Wattmeter Energy Meter, 10-40A

• ...configuration pulse output is passive (polar) and the remote pulse output can be selected as passive (non-polar). KWH meter is easy to contact with various AMR systems and conforms to the standards IEC 62053-31 and DIN43864..
• 【One-way measurement】One-way measurement of single-phase two - wire active energy consumption. This has nothing to do with the direction of the load current. Comply with IEC 62053-21..
• 【Two Wiring Methods】The din rail energy meter has direct connection operation, two wiring methods. Standard configuration S type wiring, U type wiring can be selected. Extend the terminal cover to protect the use of the security..

Upgraded Watt Meter Power Meter Plug Home Electricity Usage Monitor, Electrical Usage Monitor Consumption, Energy Voltage Amps Kill Meter Tester with Backlight, Overload Protection, 7 Modes Display

• ...amps, hertz, power factor, cost, minimum and maximum power (W), cumulative days and time of your appliances. By switching 7 display modes, you can easily know the various parameters while the appliance is working. The home energy monitor can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time..
• 【Upgraded LCD display】: With large screen size 2.36 inch x 1.85 inch, clearer monitor backlit, our electrical usage monitor can display the data clearer and more visible no matter day or night. 180°full wide viewing angles is great for reading and recording the data in any angles. No need to stand on the front of the display and bend over to read the numbers. Backlight time: 10 minutes..
• 【Overload protection】: When the power of the appliance exceeds the overload power, the LCD will display “OVERLOAD” to warn the user. All the buttons will quit working and can only be workable when you lower or remove the load power. The default overload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "function" button for more than 3 seconds to enter the setting..
• 【Data Memory Function】: The wattage meter will r....

Generac 6852 Home Link Upgradeable Transfer Switch Kit, 30 Amp

• 100-Amp 120/240 volt single phase Smart transfer switch is housed in a Steel NEMA/UL type 3R enclosure.
• Transfer switch connects through the utility meter for easy installation.
• smaller fuses integrated into the control board.
• Heavy duty Generac contactor is a UL recognized Device designed for years of service.
• The controller at the generator handles all the timing, sensing, exercising functions and transfer commands.
• Can be used in Tandem with Generac's Smart Management modules, up to 8 more loads can be managed as well, providing the most installation efficient power Management options available.