Top Single Phase Aluminum Motor Reviews

Cerwin Vega SPCL152 15" 2Ω 3600W Max Single Voice Coil Subwoofer

  • 15" Single 2 ohm Stroker Pro Classic Series Subwoofer Power Handling: Peak: 2400 watts RMS: 1200 watts Recommended power: 1500 RMS.
  • Adjustable phase plug Double spiders: more power handling Detented adjustable voice coil control: Allows precise control of overall excursion, tune up to 15 percent in 5 percent increments.
  • Heavy cast aluminum industrial basket High density motor structure for higher power handling.
  • Klippel DA optimized motor and suspension symmetry Push terminals 4" Single-layer high temperature voice coil.
Check Stock

LAPOND High Performance VFD Inverter VFD Drive 2.2KW 220V 3HP 9.6A,Variable Frequency Drive for Motor Speed Control,SVD-PS Series

  • This is single phase VFD with single phase 220V INPUT and three phase 220V OUTPUT,ONLY work with 3 phase 200-250V asynchronous motor,If your motor is heavy load, pls choose a higher Horsepower vfd than your motor's or contact sales for model selection suggestion..
  • SVD-PS Series VFD has better performance Vector controlled and stability to enable motor to achieve high torque in low speed rotation to increase motor working efficiency.
  • support fast accelerate/deccelerate with external optional braking resistor(100W ≥70Ω) and external potentiometer(10K).
  • Rich of digital and analogy control terminals for versitile control, well controlled fans produce low acoustics noise.The fan only work in VFD running status..
  • Application : spindle motor,lathe,milling,pumps,treadmills,conveyors,winding machine, mixer, extruder, slitter, compressor, ventilator,elevator,centrifuger and other machines..
  • We are the original factory,any technical issues do not hesitate to contact us.
Check Stock

Grizzly Industrial G0449-37\ 10 HP Drum Sander

  • Sanding drum motor: 10 HP, 240V, single-phase, TEFC, 1725 RPM.
Check Stock

DC Motor Speed Controller AC 110V Input DC 24V-90V Output Motor Speed Controller Switch Electric Speed Regulator for Permanent Magnet DC Motor 400W DC-51

  • High Precision:Motor speed controller 36V has small size, high precision, wide speed controlling range, low power consumption and long service life.
  • Size: 11.2 × 10 × 6cm/4.4 × 3.9 × 2.3inch.
  • Single Phase Controller:This DC motor speed controller 24V is only suitable for the motor below 1800rpm. A single-phase asynchronous motor speed controller and can be used for 24V, 36V, 90V DC motors. Input Voltage: AC 110V.
  • Wide Application:Adjustable DC motor speed controller 90V can be widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.
  • High Quality Circuit Board:This motor speed controller 24V uses high quality electronic circuit and integrated components, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • Fast To Respond:DC motor speed controller is used with single-phase asynchronous motor to realize feedback constant speed and stepless speed regulation. It feels smooth and has good durability.
Check Stock

Metabo - 8\ Bench Grinder - 3, 570 Rpm - 4.8 Amp (619200420 200), Bench Grinders

  • No-load speed (RPM): 3,570 and Arbor size: 1".
  • Sturdy machine for industrial use and Low-noise and low-vibration, maintenance-free induction motor.
  • Motor for single phase alternating current.
  • Robust die-cast aluminum protective covers.
  • Protective cover bayonet lock for quick and simple disc change.
Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

  • IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
  • If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check Stock

Grizzly G9933 Three Spindle Shaper

  • Motor size: 3 H.P. TEFC Single Phase 220V.
  • Working size of table: 15-Inch x 32-Inch.
Check Stock

Grizzly Industrial G0791-12" X 36" Combination Gunsmithing Lathe/Mill

  • Lathe motor: 2 HP, 220V, single-phase, 8.5A.
  • Mill motor: 3/4 HP, 220V, single-phase, 4.5A.
Check Stock

Grizzly Industrial G0958-8" Combo Planer/Jointer with Helical Cutterhead

  • Motor: 1.5 HP, 120V/240V, single-phase, 15A/7.5A, prewired 110V.
Check Stock

Mophorn 1 Hp Electric Motor 3450 RPM 11.2-5.6 A Single Phase Motor AC 115V 230V Air Compressor Motor 56C Frame Suit for Agricultural Machinery and General Equipment

  • Single Phase: The motor is 1HP single phase electric motor, features with 115/230V voltage and 11.2/5.6A full load amperage.
  • Fitted Frame and Shaft: With 56C frame, the electric motor also has 1.875 inch length and 0.625 inch diameter keyed shaft.
  • High Speed: The electric motor features 3450RPM rated speed and 3600RPM synchronous speed. High speed meets your different needs..
  • Fan Cooled: Our electric motor is TEFC (Totally Enclosed Fan-Cooled) motor. A built-in fan helps to dissipate heat and prevent the motor from overheating..
  • Universal Motor: Universal Motor- Universal used for the matching of water pumps, agricultural machinery and general equipment..
Check Stock

Rubi Tools ND 7IN READY Portable Electric Tile Saw

  • Adjustable Stainless-steel table with tilting right table for 22.5 ° and 45 ° miter cuts.
  • Extruded aluminum fence with a single-action lever for fast setup of repetitive cuts.
  • Transparent splash guard provides a clear view of the blade and the cut line for precision alignment.
  • Direct drive and single-phase motor with 0,75 HP.
  • Cutting capacity is 20" for straight cutting, or what is the same, for formats up to 12 "x12" diagonal cutting and a maximum thickness of 1 1/4 "( 3/4 "for miter cuts).
Check Stock

Grizzly Industrial G0555 - The Classic 14 Bandsaw

  • 1 HP motor, pre-wired 110V / 220V compatible, single-phase (11A at 110V, 5.5A at 220V).
  • All ball bearing construction w/ Upper & lower ball-bearing blade guides.
  • Includes 3/8" blade, extruded aluminum fence and miter gauge.
Check Stock

Grizzly Industrial T30488 - HEPA Filter Upgrade for G0548ZP & G0562ZP

  • Blower/impeller: 12-3/4" balanced cast aluminum.
Check Stock