Top Single Color Module Reviews

EC Buying AD620 High Accuracy Low Power Programmable Instrumentation Amplifier Module Voltage Amplifier Module Differential Amplifier Single-Ended/Differential Small Signal/Small Amplifiers Module

...electronic scales and sensor interfaces. Also features low noise, low input bias current, and low power consumption. The module has a fixed voltage output..
♥Basic Features: ✭Module Name AD620 Instrument Programmable Amplifier ✭Module size:50mm * 50mm ✭Module power supply: 5V-24V ✭Module input signal type: single-ended signal or differential signal ✭Module signal input and output range: the input signal range is within 100 microvolts of the power supply, and the output signal range is within the power supply ✭Module bandwidth: AD620: 120KHz (G=100), AD623: 800KHz (G=1), AD620/623 is lower than 50KHz at high gain, and higher than 1MHz at low gain.
♥ Other Features: ✭Module gain: When there is no solder slip, the AD620 will zoom by 10 times by default, and the AD623 will zoom by 20 times by default. During welding slip, AD620: G=1+50K/Rg, AD623: G=1+100K/Rg ✭Maximum magnification of the module: more than 2000 times (actual measurement), due to the large gain of the waveform frequency band, it is recommended to use multi-stage amplification with high gain ✭Fixed output voltage: 5V-10V (default delivery 5V).
♥ Other parameters: ✭Common mode rejection ratio: AD620: 100dB (minimum, G=10).
AD623: 90dB (minimum, G=10) ✭Input bias cur....

Check Stock

FDSF Diy In12 In-12 Nixie Tube Pcba Kit Digital Clock Beautiful Gift,No Tubes

2.12/24 hour module: Click "Up" key to change.
3.Sleep module. Long Press "UP", while no display , into sleep module(22:00~07:00 no display. 07:00~22:00 display). Display all "0"number,out of sleep module..
1.Set : Long Press "Down" key into setting . Click "Up","Down" to select , and Long Press "Down" key to finish..
4.Set back color: Click "Down" to change color. when color refresh that means it is into change color automatic (every day change one color),or color is fixed..

Check Stock

Adafruit 1918 Analog UV Light Sensor Breakout - GUVA-S12SD

photosensitive resistance module's most sensitive to ambient light, commonly used to detect environment around the brightness of the light, or MCU trigger relay module, etc..
module in the environment light intensity than set threshold, output high level DO end, when the environment light intensity more than set threshold, the DO output low level.
the DO output can be directly connected to microcontroller, through single chip microcomputer to detect the high and low level, thus to detect the environment light intensity change.
the DO output can be directly driven our relay module, which can form a light-operated switch..

Check Stock

Juried Engineering LM339N LM339 Quad Differential Comparator Industrial Grade Breadboard-Friendly IC DIP-14 (Pack of 5)

SINGLE-CHANNEL: TLV3501 is a single-channel high-speed push-pull output comparator, delay is 4.5ns, supply voltage: + 2.7V to + 5.5V.
FRONT SHAPING MODULE: This module can be for a wide range of voltage signal shaping period, as the frequency, phase difference time domain measurements and other front-end conditioning module.
CMOS AND TTL: Rail-to-rail output can directly drive a CMOS or TTL logic.
EASY TO OPERATE: Without threshold setting, the sine wave, square wave and triangular wave can be transformed into square wave, which can be used easily without debugging.
GREAT EXTENSIBILITY: At the same time, it has great extensibility, just change a small amount of the original.

Check Stock

Elusive Wildlife Kill Light XLR250 Single Mode LED Module White

250 Yard Single Mode CREE Kill Light LED Module.
Available in Green, Red, White, IR850, & IR940.

Check Stock

Elusive Wildlife Kill Light XLR250 Triple Mode LED Module White

250 Yard Single Mode CREE Kill Light LED Module.

Check Stock

Ximimark 2Pcs ISD1820 Sound Voice Recording Playback Module Sound Recorder Board With Microphone Audio Loudspeaker

This module can directly drive 8 Euro 0.5W small speakers, easy to use 10 seconds voice recording and playback..
High quality, natural voice reproduction..
With loop playback, jog playback, single-pass playback..
Recording and playback control mode: button control or single-chip microcomputer, control line IO has been led out..

Check Stock

ICQUANZX 3Pcs ISD1820 Sound Voice Recording Playback Module Sound Recorder Board with Microphone Audio Loudspeaker.

High quality, natural voice reproduction..
This module can directly drive 8 Euro 0.5W small speakers, easy to use 10 seconds voice recording and playback..
Recording and playback control mode: button control or single-chip microcomputer, control line IO has been led out..
With loop playback, jog playback, single-pass playback..

Check Stock

FN848 NEW Dell PowerConnect 6224F 24-Port Layer 3 Gigabit Ethernet Fiber Switch

3-port CX-4 10GbE copper module (supports 10Gb connections only).
2-port 10GBASE-T 10GbE copper module (supports 1/10Gb connections).
Features: Auto-negotiation for speed, duplex mode and flow control.
Supports DCB requirements including PFC (802.1Qbb), DCBx, iSCSI TLV 2.2, iSCSI Optimization.
FCoE FIP Snooping (FCoE Transit), single-hop.

Check Stock

Apple iMac 27-Inch Desktop, 3.4 GHz Intel Core i7 Processor, 16 GB memory, 1TB HDD (Renewed)

Compatible with: MK462LL/A, MK482LL/A, MK472LL/A, refurbished, and all built to order late 2015 iMacs 27 inch with 5K Retina Display..
32GB ( 4x8GB ) DDR3L 1867 Mhz Late 2015 iMac Unbuffered Non-Parity SDRAM 204pin Low Voltage Dual Rank Module. Works with all iMacs with Skylake Processors. This module works for 27″ late 2015 iMac’s of every spec..
Every module is backed by a limited lifetime warranty. We always have hundreds in stock! Free technical support from our Apple Expert technicians..
Every single module is fully tested by the manufacturer..
Our experienced technicians can verify if these parts will work for you..

Check Stock

Abovehill 12V Wireless RF Remote Control Relay Switch Universal 1-Channel 315MHz Receiver with 1 Transmitters for Garage Door Openers, Cars, LED Lights & More

...tely controlled from a long distance and has strong anti-interference. The remote control distance of the open space is 30 meters, which will reduce the control distance in the case of interference or wall blocking. The specific situation is determined according to the site..
[Wireless Remote Control Module] It is a single-channel control module with a working voltage of 12V DC and an operating frequency of 315mhz. It can directly drive DC0-30V/80-250VAC load, and the relay can withstand up to 10A.Remote control uses 12V 23A dry battery(No battery)..
[Wireless Remote Control Module] Its coding type is fixed code and learning code. The control mode is three modes: jog, self-lock and interlock. Delivery defaults to jog mode. If you need to switch to self-locking or interlock mode. You need to change the contacts labeled “L” and “T” on the back of the receiving module..
[Wireless Remote Control Module] It also has learning and deletion capabilities. The operation is very simple and detailed in the product description..
[Wireless Remote Control Module] A wide range of applications, from simple home remote control to autonomous control, such as windows, entrances, garage doors, alarm systems, lifting equipment, etc. Note: If you encounter any problems....

Check Stock

ZONESTAR Z9V5Pro Multi Colors 3D Printer with Four Extruders 4.3 Inch TFT-LCD 32-bit Silent Motherboard Auto Leveling Auto Resume Removable Magnetic Platform Large Build Volume 300 x 300 x 400mm

...lf-designed 4-IN-1-OUT hot end makes the color switching more efficient and reliable, and gets rid of the common oozing issue of multi nozzle 3d printers. You can paint color on 3d model file in slicing software to assign different extruder on the different area, so it can print multi colors even if you have only a single color 3d model file.
2. [Fast Assembly and Quiet Printing] The printer boasts a modular design that makes it easier to assemble. 32-bit motherboard with silent motor drivers make the machine work noise very low (the noise measured at 1m away from the machine is less than 55dB).
3. [More Function] Filament detection and print resurrection function provide can continue to print from the same place where it has been stopped, regardless of unexpected power failure or the filament have run out. Bed auto-leveling sensor on which can compensate the unevenness of the heated bed automatically, to achieve easy, fast and precise leveling. The models can be eay to remove by bending the flexible magnetic platform gently after printing.
4. [Open Source and Upgradable] Z9V5Pro’s firmware and slicing software are open source. You can change it to make the machine realize the functions you expect. We have introduced many optional upgrade compone....

Check Stock

Dpg-200 Vacuum Transducer with

-10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.

Check Stock