Top Signal Emitter Reviews

OBVIS IR Infrared Repeater Kit Remote Control Kit Hidden IR System with 1 Receiver 2 Emitters Control Up to 2 Devices Compatible with DVD Player TV CD Player Amplifer Home Theatre Cable Box Xbox One

  • Hidden Infrared Repeater System comes with 1 Receiver, 2 Emitters as well as an Adapter for power supply. You can control up to 2 different devices or....
  • Receiver comes with LED confirmation indicator, picks up signal sending from remote control. You should place the receiver pointing straight to where....
  • Emitter sends signal from your remote control to other devices placed behind the door or wall..
  • The receiver cable comes with a USB plug and the package comes with a 5V adapter. You may either take power from devices with USB port or directly....
  • Compatible with all devices within 34 to 60 kHz. Extra Long Cable: 6 Feet for Receiver Cable and 9 Feet for Emitter Cable.
Check Stock

Juried Engineering Lite-On 4N26 Optocoupler, Phototransistor Output, with Base Connection Breadboard-Friendly IC DIP-6 (1 Piece)

  • If - Forward Current: 80 mA, Maximum Collector Emitter Voltage: 30 V, Maximum Collector Current:100 mA.
  • Response Time (tr : TYP,3 s at VCE=10V, IC=2mA, RL=100 ).
  • Isolation Voltage: 1500 Vrms, Maximum Collector Emitter Saturation Voltage: 0.5 V, Vf - Forward Voltage: 1.5 V, Vr - Reverse Voltage: 6 V.
  • Example Applications: I/O interfaces for computers, System appliances, measuring instruments, Signal transmission between circuits of different potentials and impedances.
Check Stock

TNP IR Emitter Extender Extension Cable (10 Feet) - Quad 4 Head 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One

  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Quad Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
Check Stock

IR Emitter Extender Remote Control Transmitter 3.5mm to IR Extension Cable Triple Head Infrared Red Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One (3 Head, 10FT)

  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Two emitters on a single plug,Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Dual Heads allow you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
Check Stock

IR Extender Infrared Remote Control Repeater Emitter Stick-On Mini Receiver Transmitter IR Blaster Extension Cable for TV/DVD/DVR/CD Player/Bluray Player (Single Heads, 10FT Long)

  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal. NOTE: Your device must have 'IR' port so the product could work!.
  • Passes IR communication: Used with an IR Repeater kit to remote control a device, extending remote control ability to any room in the house. NOTE: Your device must have 'IR' port so the product could work!.
  • Two emitters on a single plug, adhesive backing allows the emitter to be easily attached to the IR eye of your device..
  • Multiple heads optional allows you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
  • The mini stick-on infrared emitter includes a 10 ft cable between the emitter heads and the mini-plug, easily meet your expectation of extending..
Check Stock

AGPtek LKV372A 60m/190ft 1080P HD HDMI Network Extender Over Single Cat6/6a/7 Ethernet Cable with IR Remote Control

  • 【1080P Transmission】-- This HDMI extender supports 1080P HD, HD Audio, 3D.
  • It extends HDMI 1080P AV signal to at least 190ft/60m via single cat6....
  • 【HDMI Lossless transmission】-- It extends HDMI AV signal to synchronous output Video display is as fluent as direct connection,Adjust the....
  • 【Pure Hardware Transmission】-- It is pure hardware design,No driver needed, plug and play. Adopt full HD transmission technology to make the video....
  • 【IR Remote Control】-- Support 20~60KHz wide Frequency IR signal transmission for controlling the source device, IR Emitter Cable and IR Receiver....
  • 【Installation Requirements】-- Requires one single cat6/6A/7 cable to connect TX and RX side. Suitable for HDMI source device(computer graphics....
Check Stock

Wire Tracker, ELEGIANT RJ11 RJ45 Cable Tester Line Finder Multifunction Wire Tracker Toner Ethernet LAN Network Cable Tester for Network Cable Collation, Telephone Line Tester, Continuity Checking

  • Professional Wire Tracker. It can help you quickly find the target line in many pairs. It is suitable for tracking RJ45 internet cable, RJ11 telephone line and other metal wire in low electricity. Please note that it can not be used to track wires with high electricity ( maximum currents for emitter and receiver are 10mA and 30mA respectively, and maximum voltage is 10V ). Besides, you may need two 9V laminated cells, which are NOT included in the packaging of this item..
  • Network Cables Verifying. Plug one side of the cable into the emitter and the other side into the receiver. Select "Network" to check and verify whether the network cables are good or not. No need of network tester..
  • Wire Tracking. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. It is recommended to stripe down some of the wires when connecting through the clip. Select "SCAN". Emitter works properly if the "SCAN" indicator is on. Use the receiver to find target wires. No need of multi-testers..
  • Telephone Line Test. The work of the telephone line of the detection of various states, only the transmitter can be detected, such....
Check Stock

Riiai Pipe Blockage Detector, 30m Pipe Blockage Tester IP67 Waterproof Pipe Blockage Scanner for Detecting Metal Pipe PVC Pipe Water Pipe

  • ...orking Distance with Strong Signal Penetration and Adjustable sensitivity】: The pipe plugging tester can pass through a wall with a thickness of 50cm, reducing the removal area.The signal is stronger, the red light with higher brightness.Adjustable sensitivity, the receiver can increase the sensing ability to the emitter by adjusting its sensitivity..
  • 【Wide range of applications in the home or professional working place】: It can be used for wall nails, metal pipes, PVC pipes, and even water pipes. Solve the problem of pipe blockage faced by construction engineers and home users..
  • 【Easy to use with buzzing alarming sound】：This pipe blockage tester toolset, equipped with a USB cable and lithium battery, it is convenient to be charged by computers or charge pal. and According to the signal strength to determine the location of the blockage. A stronger signal with louder alarming sound..
Check Stock

4389102 Refrigerator Ice Maker Emitter Sensor Control Board Kit Compatible with Whirlpool Replaces 2198586 PS557945 2220398 W10757851 AP5956767 ADC9102

  • Part Numbers: 2198585, 2198586, 2198588, 2220398, 2220402, 2255114, 4388635, 4389102R, AP5956767, AP3137510, PS557945, PS10064583, TJ4389102R, W10193666, W10193840, W10290817, W10757851..
  • The ice level control board uses an infrared beam to sense the level of ice in the ice bucket and signal the ice maker to make more ice..
  • Refrigerator ice maker ice level optics control board kit.Includes emitter and receiver control boards.You can send us refrigerator models number, we can help you to confirm if it can work or not..
  • This refrigerator control board was specifically designed to look and function the same as the original Emitter Sensor Control Board on your Whirlpool Ice Maker. While this is NOT a genuine Whirlpool part, it is a direct replacement and it will appear, fit and work like the factory part..
  • For any reason you're not completely satisfied, you can ask for a replacement or full refund. If you are not sure whether this replacement part correctly fit your appliance, please feel free to contact us or ask a question through Amazon..
Check Stock

Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black

  • Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector.
  • BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit..
  • BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them..
  • Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet..
  • Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.).
Check Stock

IR Emitter Remote Control Extender Cable, 4 Heads 3.5mm Plug Infrared Red Transmitter Blaster Blink Eye IR Extending Cable for IR Repeater/TV/DVD/Bluray Player/Xbox One (4 Heads, 10FT)

  • PASSES IR communication: used with an IR repeater kit to control a device.
  •  Remote control ability to stretch to any room in the house.
  •  Self-adhesive back allows the spotlights to be attached to the IR eye by a device.
  • Quad heads allow you to control over several pieces of devices with only one IR output.
  •  For use with IR extender extension system, Xbox One, IR connector blocks and home automation controller.
  • The mini stick-on emitter includes a 10 m cable between the emitter heads and the mini-plug.
  • Can you through the existing IR controller, control A / V components such as amplifier, cable box, HD DVR, stereo receiver, SAT TV receiver, CD player, DVD player, BluRay player or other components By IR signal.
Check Stock

4 Pack 3DHeaven Rechargeable 3D Glasses Compatible with EPSON ELPGS03 3-D Glasses

  • [RF 3D Glasses] The active shutter 3D glasses use RF to transmit signals, works without emitter. Compared with traditional IR signal transmission, the RF signal connection is faster, and the continuity is more stable. Pack of 2, super saving!.
  • [Compatible Devices] The RF 3D active shutter glasses suitable for most of RF 3D signal TVs and 3D projectors. Compatible 3D RF projector: EPSON, Sony, JVC, xiaomi2, Lenovo and other more.
  • Compatible 3D HD TVs: Epson, Samsung, Sony, Panasonic, Sharp, Toshiba, Konka, TCL, Haier and more. Can replace these models of 3D glasses: TDG-BT500A, TDG-BT400A, SSG-5100GB, TY-ER3D4MU, AN3DG40 and more. [PLEASE NOTE: Device before 2012 is not compatible with this remote control.].
  • [Easy to Use] Rechargeable design 3d RF glasses, with ON/OFF switch. Auto 5 seconds Stand by and 5 minutes Shut Off. Not throwaway 3D glasses. High definition, no ghosting images, no flickering, clearer and more stable than IR signal connection. Providing you a superior 3D visual experience!.
  • [Quickly Pairing] When pairing, please make sure that the distance between the 3D glasses and the 3D device is less than 19.5 inches/50 cm. Press the switch button, the green LED indicator will stay on for 3 seconds, the glasses are in the power-on state, then s....
Check Stock

IR Repeater Neoteck Infrared Remote 1 Receiver 4 Emitters Control Kit Hidden IR System USB Adapter for Amplifier Cable Box Stereo Receiver Satellite TV Receiver CD Player DVD Player Blu-ray Player

  • Hidden IR Repeater 1 Receiver 4 Emitters Infrared Remote Control Kit, You can Control Your Home Theater Device/Components Which are Kept behind Closet....
  • Receiver: with a Convenient IR Confirmation LED and Pick up the Signal from the Remote Controller.
  • Emitter: Send the Signal to the A/V Components.
  • 34-60kHz Operating Range(Please Aim at IR Receiver when Using Remote Control).
  • 5V USB AC Power Supply, Support Amplifier, Cable Box, Stereo Receiver, Satellite TV Receiver, CD Player, DVD Player, Blu-ray Player or any other....
Check Stock