Top Sight Glass Cover Plate Reviews

16-Pack Glass Hexagon Magnetic Spice Jar - Stainless Plate Included

  • PACKAGE CONTAINS: 16 glass hexagon spice jars + 394 labels + 1 chalk mark pen + 1 stainless plate, enough to DIY your kitchen.
  • EXPLOIT IGNORED BUT VALUABLE SPACE: Magnetic jars organize your kitchen, and hexagonal shape turns your spices into a work of art!.
  • APPROPRIATELY CAPACITY: 3 oz magnetic glass jars measure 2" x 2.2", can hold enough for daily-use herbs or other small items like pills and candy.
  • SPICE LABELS INCLUDED: Each pack comes wit spice labels so you can distinguish spice easily. With spices in sight, you’ll use them more often.
  • STAINLESS PLATE INCLUDED: With the wall plate, besides fridge, you can also keep spices on your back-splash, inside of the pantry, on the side of a....
Check Stock

Rexka 20pcs 10mm Hole Bumper Engine Cover Fender & Grille Clips Compatible with Subaru 909140007 Baja Forester Impreza Legacy Outback Tribeca 2011-2000

  • Other Names:Under Cover Clip, Grille Clip, Fender Liner Clip, Splash Shield Clip, Fender Liner Retainer Clip, Lower Cover Clip, Sight Shield Clip, Cover Clip, Reinforced Beam Clip, Side Cover Clip, Bumper Cover Retainer Clip, Lower Bracket Retainer Clip, Fender Liner Retainer, Suspension Cross-Member Clip, Wheelhouse Liner Retainer, Grille Assembly Clip, Plate Clip, Pad Clip, Bumper Cover Fastener, Reinforcement Fastener, Guide Clip, Side Retainer Rivet, Upper Quarter Trim Fastener..
  • Upper Seal Clip, Corner Support Clip, Protector Clip, Under Cover Retainer Clip, Upper Bracket Clip, Grille Bracket Clip, Lower Bracket Clip, Retainer Plate Clip, Upper Plate Clip, Bracket Clip, Fog Lamp Assembly Clip, Side Bracket Retainer Clip, Upper Cover Retainer Clip, Cover Plate Clip, Hole Cover Clip, Pillar Trim Clip, Closure Panel Clip, Spoiler Clip, Protect Shield Clip, Backup Lamp Clip, Duct Clip, Outer Cover Clip, Bumper Cover Retainer, Bumper Cover Side Bracket.
  • Replaces Subaru: 90914-0007 Fits: Subaru: Ascent, B9 Tribeca, Baja, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, Tribeca, WRX, WRX STI, XV Crosstrek.
  • Head Diameter: 21mm Stem Length: 15mm Fits Into 10mm Hole.
  • This is the most common Clip for Subaru cars. Commonly Used in Front Bumper, Front Grille,....
Check Stock

Red Dot Sight, Tactical RMR 20mm Red Dot Sight 3 MOA Pistol Scope Adjustable Brightness with Glock Mount, Reflex Sight Red Dot Scope

  • 【Wide Applications】: RMR red dot sight comes with 20mm (0.78inch) Picatinny rail mount and a heightening base. It's compatible with pistols and Picatinny rails. Capable of being mounted on a RMR slide cut on a Glock.
  • 【Fit For 20 Mm Picatinny Rails Mount】: Compact Red Dot Sight Kit includes 20mm Picatinny Rail Mounts Bottom Plate and Low Profile Fixed Mount Bottom Plate, please make sure it is suitable for your model before purchasing..
  • 【Easy to Install】: Forged aluminum housing material. The sight lines have been carefully designed to be perfectly combined. Ultra-light, water- and shock-resistant for improved performance in all weather conditions..
  • 【Multi-Coated Lenses】: High-quality, fully multi-coated lenses provide a clean, wide field of vision. Power and spot intensity controls are located on the left side of the sight glass for easy selection of 6 brightness levels..
  • 【Professional after-sales】: Safe and fast. 1 year product warranty, if you need help, please feel free to contact our customer service, 24 hours online professional customer service..
Check Stock

2 Pieces 9.6 Inch Microwave Glass Plate Microwave Splatter Cover Microwave Glass Turntable Plate Replacement for Small Microwaves

  • Package content: the package comes with 1 piece of 9.6 inches / 24.5 cm Microwave Glass Plate and 1 piece of 9 inches / 23 cm Microwave Splatter cover.
  • Quality material: The microwave glass plate is made of thick glass material, and the Microwave Splatter Cover is made of PP material.
  • Easy to install: there are 3 notches on the glass plate of the microwave oven, just align the notches with the middle of the plate.
  • Compatible with various brands and models of small microwave ovens: Compatible with LG, Kenmore, Sears, HighPointe, Emerson, Sainsbury, Asda, etc..
  • Warm note: This product does not include Roller Turntable Support Guide Ring.
  • Please do not use Microwave Splatter Cover in baking mode.
Check Stock

16-Pack 3oz Magnetic Spice Jar Hexagon Glass with Shaker Lids and 394pcs Labels

  • PACKAGE CONTAINS: 16 glass hexagon spice jars with shaker lids + 394 labels + 1 chalk mark pen + 1 stainless plate, enough to DIY your kitchen.
  • EXPLOIT IGNORED BUT VALUABLE SPACE: Magnetic jars organize your kitchen, and hexagonal shape turns your spices into a work of art!.
  • APPROPRIATELY CAPACITY: 3 oz magnetic glass jars measure 2" x 2.2", can hold enough for daily-use herbs or other small items like pills and candy.
  • SPICE LABELS INCLUDED: Each pack comes wit spice labels so you can distinguish spice easily. With spices in sight, you’ll use them more often.
  • STAINLESS PLATE INCLUDED: With the wall plate, besides fridge, you can also keep spices on your back-splash, inside of the pantry, on the side of a....
Check Stock

Microwave Splatter Cover Microwave cover | Microwave Cover for Food microwave plate cover for 6–7–8–9-10-11-12 inch Plates & Bowls

  • Mess-Free Meal Prep: Our microwave food cover is a simple and effective solution to warm up your food without creating any mess! This microwave plate....
  • Superior Quality Microwave Lid: -This microwave plate cover is made with premium quality materials, heat-resistant, and BPA-free. The microwave food....
  • Plate Cover: This premium microwave splatter guard has a special design compare with other microwave covers ,it is equipped with 2 air vents on the....
  • With the EZY ACTIVE food cover for microwave oven, prepping your meal has never been this easy and fun! Our silicone microwave cover/ glass microwave....
  • 5 years Warranty: Not only is very practical and secure but our glass microwave plate cover is also durable and very easy to clean and maintain. This....
Check Stock

Ade Advanced Optics RD3-012 Delta Red Dot Micro Mini Reflex Sight for Handgun - FDE/TAN Body Color

  • ...un on the market because every handgun company made their FDE color proprietary, however, it will look great even the color might be slightly darker or lighter..
  • This ADE RD3-012 Red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates(SOLD SEPARATELY) that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP, Taurus TORO using Pistol manufacturer provided optic mounting plate(SOLD SEPARATELY)..
  • It is fits directly to "Optics Ready" pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided #1 mount, however the front switch of the sight needs to trim down 2mm..
  • Comes with battery, protective cover, M3x6mm screws for connecting to the provided picatinny plate, picatinny plate, lens cloth, wheel dial reference tool, allen wrench, screw driver, anti-flickering robber shim..
  • 1.75" length x1.25" width x1.15" height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A windage and lockable elevation adjustments. Weight approximate 1.6oz..
Check Stock

TWP Aluminum Anodized Black Universal Fit All Sight Cut Cover Plate Do not fit Trijicon RMR Slide Cut The Cover Plate for Glock 17 19 26 Cut Slides

  • Aluminum Anodized Black Universal Fit All Sight Cut Cover Plate, Not For Trijicon RMR, as the Different Thread Hole Space, The Cover Plate For Glock....
Check Stock

TWP Aluminum Anodized Silver Universal Fit All Sight Cut Cover Plate Not for Trijicon RMR as The Different Thread Hole Space The Cover Plate for Glock 17 19 26 Cut Slides

  • TWP Aluminum Anodized Silver Universal Fit All Sight Cut Cover Plate, Not For Trijicon RMR, as the Different Thread Hole Space, The Cover Plate For....
Check Stock

DOITOOL 6Inch Ceramic Cake Stand with Dome Cover, Multi- Functional Serving Platter and Cake Plate, Round Clear Cake Plate Server Display for Kitchen, Cake, Salad, Platter, Punch Bowl, Desert (White)

  • [High Quality]--- The Ceramic Cake Stand with Dome Cover is food- safe Nonlead Glass. Unlike some plastic keeper, its 100% BPA free..
  • [Easy to Clean]--- The glass plate and bell jar are dishwasher safe.. You can rinse and dry after each use..
  • [Elegant Design]--- Beautiful crystal glass butter dish with matching dome cover, mini exquisite elegant design..
  • [Thoughtful Handle]--- The butter dish cover features a small grip that makes it easier to remove it when youre getting cake..
  • [Wide Application]--- Our dome covered clear glass butter dishes are great for Cake plate, serving dish, punch bowl, chips and salsa plate, salad bowl, and baking goods stand..
Check Stock

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith.
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO(Screws provided for Trijicon and ADE). Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
Check Stock

Picatinny Rail Mount plate for Glock 17 19 22 Taurus G3C-Work with All railed red dot such as Vortex Venom, Doctor, Trijicon RMR, comes with builtin screw hole for Sig Romeo Zero, Holosun 407k/507k

  • This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply “plug and play”. We recommend having a qualified gunsmith to install.
  • This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to ....
Check Stock

Ade Advanced Optics RD3-018-SC Spike Micro Red Dot Sight for Springfield Hellcat (OSP/PRO), P365XL Spectre Comp and Canik TP9 Elite SC

  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens..
  • ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness..
  • 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6" x (Width).92" x (Height).93".
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun..
Check Stock