Top Side Mount Lights Reviews

Partsam 12V Waterproof Square LED Trailer Tail Light Kit Clear Lens Red Trailer Brake Stop Tail Turn Signal Running Lights License Kit for Camper Truck RV Boat Trailer Snowmobile Marine Under 80'

4.56″ long x 3.78″ tall x 2.63″ deep.
trailer light kit with 2 stud mount waterproof LED tail lights, corrosion-resistant license-plate bracket, 25ft wiring harness(one 21.98 feet and one 3.93 feet wiring harness), stainless steel mounting hardware, 2pcs amber clearance lights and 4pcs reflective sticke. 2-stud mount on 2″ centers.
2 Clear/Red, waterproof, stud-mounted LED trailer tail lights for less than 80″ trailers tractors truck boat snowmobile, esp. ideal for jet ski trailer lights. Square trailer light serves 7 functions: Stop light, Turn signal light, Tail light. Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator(only for LH Side/Driver Side).
For this Red submersible LED trailer light kit, Right light has 16 LEDs (12 face, 4 side).
Left/streetside light has 21 LEDs (12 face, 4 side, 5 bottom). These trailer tail lights has no screws on the lamp shade, the LED trailer lights are completely welded together, The circuit board of tail light is seal. excellent tightness makes it be definitely IP67 waterproof and submersible. Of course, you can also put the clear epoxy around it for a guarantee.
White+ Yellow, front side works and is high brightness.

Check Stock

BJZ LED Trailer Marker Lights Amber 6 Led Side Marker Clearance Light Bar 12V 3.8" Front Rear Signal Indicator Smoked Light Strip Waterproof for Trailer Truck Van Pickup ATV UTV RV, 10Pcs

...Light Bar Parameters】Pack of 10, each marker light with PC smoked lens, built-in 6 high-brightness LEDs, with ABS black base. Waterproof: IP67.
✔【Wide Application of LED Marker Lights】Fit for LED marker lights, side marker lights, trailer marker lights, clearance lights, indicator lights, tail lights, running lights, turn signal lights, brake lights, parking lights, grille lights, decorative lights, fog lights, undeglow lights and more..
✔【Applicable Models of LED Side Lights】Suitable for Truck, Trailer, Pickup, ATV, UTV, RV, SUV, Van, Offroad, Golf Cart, Bus, Motorcycle, Snowmobile, F350, F450, Lorry, Camper, etc..
✔【High quality Clearance Lights】External reinforced PC lens and scratch resistant ABS base with high brightness SMD LED wick inside. IP67 sealed waterproof, dustproof, shockproof, durable, and not easy to fade after long-term exposure. LED lights can output high-brightness light with very low power consumption, improving your safety when driving at night..
✔【Easy to Install】Surface mount, mounting hole distance is 3.34 inches (85mm). 2-wire connection: Red is Positive, Black is Negati....

Check Stock

Partsam 10Pcs 6.2 Inch Red LED Trailer Side Marker Lights 12 LED Surface Mount Sealed Clearance Indicator Lights Lamps Waterproof Chrome Bezel Turn Signal Trailer Bus Universal Ultra Flat Clear Lens

Package includes 10 Pieces Red Peterbilt-style 12 diode LED ultra-thin marker lights in CLEAR LENS with stainless steel rim Bezels, flat clear lens, mounting screws are included for easy mounting.
These Oval Red led marker lights are an exceptionally low-profile marker lights. Every red light comes with 12 red high power led diodes - 2 rows of 6. As most trailer lights of this style are nearly an inch tall, this red side marker light measures in height at 1/2" - really very thin. overall dimensions: 6.15" (L) x 1.84" (W) x 0.5" (H) and 4.0" between mounting holes( measured center-to-center).
This flush mount led light are hardwired with 2 wire pigtails: Black is ground and red is positive. Easy to install and looks great on your bumper, cab-and-sleeper kits, fender guards, everywhere else you can imagine.
Functions: these surface mount led lights can be work as trailer lights, led marker lights, side marker lights, led clearance lights, side cab panel lights, fender lights, indicator lights, truck lights etc. These red led lights are universal for 12V DC vehicles, esp. the heavy trucks such as Peterbilt, Kenworth, Freightliner etc..
Warranty: We truly offer 1 year warranty for these oval Flat red Marker LED Trailer Lights! If have any questions o....

Check Stock

Vintage Technologies LT28 RV Teardrop Trailer LED 12 Volt Side Markers

LED Surface Mount, (3 Diode) Side Markers With Chrome Bezel's.
Kit include 2 Amber 3 LED Side Marker Lights and 2 Red 3 Led Side Marker Lights, Four Chrome Bezel's.
These Lights are Approximately 4" Long and 1 1/4" Wide and 3/4" Tall.

Check Stock

Partsam 2Pcs 17 LED Reflector Double Face Led Watermelon Lights, Amber/Red 3.5" Double Face Round LED Turn Signal Lights 17 Diodes, Chrome Double Face Auxiliary Watermelon Pedestal Lights Amber/Red

Miro-Reflex faceted reflector design provides increased light output and a contemporary appearance while maintaining a traditional footprint.
These are right and left fender mount clearance lights with amber light facing forward and red light facing backwards.
Perfect lights to mount on your truck or trailer side fenders.
Dual-face trailer light: Clear/Red side serves 3 functions - stop, turn and tail light.
Clear/Amber side serves 2 functions - parking and rear turn signal light.
Hard-wired with three plain wires - white wire is ground, which powers both colors (amber, red).
gray wire is hot, which powers the marker function for both the amber and red sides.
red wire is turn signal, which powers the turn signal function for both the amber and red sides.
Of course, the marker and turn signal function can not be used at the same time.
Applications: This round double faced sealed LED pedesta....

Check Stock

Partsam 6Pcs Mini Oval 2.5 Inch LED Light 2 Diode Clear Lens Amber Universal Mount Side Marker Trailer Lights, Sealed Mini oval led side fender lights Trailer Truck Surface Mount Waterproof

...sam 6Pcs 12v DC clear lens Amber Side Marker trailer Light Mini-Sealed LED Surface mount design.
2-1/2" x 1-1/16" Rectangle. Waterproof, LED trailer light serves as either a side marker or clearance light when properly mounted. Surface mount to trailer. 2-Wire design. Screws are not included.
These Mini Led Trailer Lights are universal. Generally people use them as clearance, side marker or identification light. We also get feedbacks from our customers using them as strobe lights by connect with the switch or relay. Also some put them on motorhome as position lights, or install them in the truck step running boards as side markers etc..
Size and Brightness: 2.54" x 1.06" x 0.7" and the center to center hole distance: 1.8".
80 lumen each light with 2 pcs High Quality LED Diodes. So if you use it as turn signals by connecting a on/off switch, but it may not be that bright.
These surface mount lights have 2 holes one in each. Because of the placement of the leads and how the lamp is mounted, You will need to drill holes for the screws AND for the wire leads to surface. The screw actually hold both the backing and the lens cover on, making it sealed and watertight. Also If you install them vertically they are more visible than if you install them horizont....

Check Stock

90 Pack 3/4 Inch LED Side Marker Lights Mini Trailer Button Lights Round Signal Lamp 3 LED Sealed Flush Mount Bulb for Boat Lorry Truck Pickup Bus 12V DC, Amber, Red, White

3/4 Inch LED Lights Kit: you will receive 90 pcs trailer side marker indicator lights, the set includes 30 pcs amber lights, 30 pcs red lights and 30 pcs white lights.
Our marker light is rated at 12V DC, suitable for most motor vehicles, such as trailer, truck, bus, van, pickup, boat and so on.
2 Wire Design: 3/4 inch LED side marker light contains 2 end wires and rubber grommet, 2 wires connection: black is negative and red is positive.
Hole diameter: approx. 2.8 cm/1.1 inches.
Sealed IP68 waterproof, there is no problem working above or under water.
High Brightness: each round indicator lamp comes with 3 pcs quality LED and 1 energy saving bulb that gives about 60 lumens.
The signal tail light can output high luminous efficiency to make your night safety, power saving and low power consumption.
Easy Installation: waterproof front rear marker indicators are easy to install with no screws, drill a hole to put the rubber grommet and mount the lights onto the rubber.
These 3/4 inch tail light can be installed on the place you'd like to mount them by drilling a 3/4 inch hole in a flat panel.
Wide Application: our 12V 3/4 inch LED marker lights can commonly serve as trailer side marker lights, turn signal lights, identi....

Check Stock

Partsam Rectangle 14x Amber/Red 4" Truck Boat Trailer Side Marker Indicator lights 8-LED Surface Mount

Package includes 14 Pieces (7Red+7Amber) Universal 4 Inch Led Side Marker Indicator Lights. NOTE: This marker lights set includes standard nut and bolt for anchoring, not self tapping screws(bot specs: 0.3cm diameter and 2.6CM long). You may need to drill new mounting holes all the way through, then use the bolt and nut to install.
7 Pieces Red Led Marker Lights and 7 Pieces Amber Led Marker Lights.
Light Size: 4" x 1.6" x 0.7" and Mounting holes spacing: 3.15in. approx.,operates form 9-16Volts.
Each Clearance Light is built in 8 LEDs miro reflectors, provide you super night visability on the road.
HARDWIRED WITH TWO WIRES: BLACK IS GROUND, YELLOW IS POSITIVE.
This Rectangle led trailer light is surface mount and you can mount anywhere as long as the size fit.
Usage: side marker lights, roof lights, corner lights, rear lights, identification lights fender lights,cab lights, clearance lights etc. Note: this led marker lights only come with one positive wire, one functions at a time. If you use it as the front turn signal lights, it may not be that bright, thanks.
Application: Works on any 12V DC vehicles. Perfectly suitable for all kinds of trucks, Trailer, Semi-trailer, Lorry, Off-road vehicle, ATV, SUV, UTE, Pickup, Tractor, Bus, Car, Boat, Car....

Check Stock

Besramtic Boat Lights Bow and Stern Navigation Lights LED Battery Powered Bicolor White Light Pole Telescopic Kit

【Boat Lights Bow and Stern Bright Lights】 Bow lights LED are equipment with 4 pieces red and 4 pieces green. Stern lights LED all round white are equipment with 8 pieces. 1 NM visibility lights bright enough to be seen from the other boats..
【Easy Installation】 No wiring is required. LED navigation lights for boats need to be installed by 3 X AA battery ( Not included)..
【Completely Sealed IP 67 】 Marine navigation lights with build -in pre-fitted tight sealed gasket..
【 Perfectly Replacement 】 Replace original lights and fit completely. Just make sure your boat has these type of led boat navigation lights to begin with..
【 Multiple Installation Base Methods Options 】 Battery operated boat Lights with the different mounting base Stern lights choose vertical side mount octagonal locking base. Bow lights choose horizontal mount octagonal locking base..

Check Stock

PSEQT 6'' Rectangle Marker Lights Amber LED Side Tail Clearance Pickup Trailer Lights Waterproof with 20 Diodes and High Low Brightness Front Rear Turn Signal Marker Lights

✅【20LED Truck Side Lights】4 x 6'' rectangle side lights uses all-transparent integrated design and has built-in 20pcs LED diodes. Light color: Amber.
Working temperature: -40℃ to 75℃. 3-wire connection design, high and low light dual function..
✅【Wide Use】Rectangle Amber Side Lights fit for side marker lights, clearance lights, turn signal lights, running Lights, tail Lights, stop turn tail lights, car auxiliary turn signal lights, etc. Widely used for 12V Pickups, Trailers, Trucks, Heavy Trucks, Wrangler, Van, SUV, ATV, UTV, RV, RZR, F350, F450, Caravan, Camper, Motorhome, Boat, Lorry, Bus, etc..
✅【Fully Enclosed Integrated Side Marker Lights】Made of sturdy PMMA material and 5mm LED lamp beads, fully sealed waterproof, moisture-proof and dustproof, can work in various environments such as rain, fog and snow. 20 high spotlight beads output high-brightness yellow light, low power consumption and energy saving..
✅【Easy to Install】3-wire connection: Black is ground, Red is low brightness as Marker Lights or Running Lights, White is high brightness as Turn Signal Lights. Surface mount, fit for front, rear and side of the car. Can be installed anywhere you need, as long as the size is ....

Check Stock

Supoika 2 Pack Steel Trailer Light Box with 6\ Red LED Oval Tail Lights & 2\ Round Side Lights with License Plate Bracket for Trailer Truck

Our trailer light with box made by 14 gauge heavy duty steel.Built to last and withstand rugged environments..
Come with 2 pack 6" oval red LED marker lights, and 2 pack 2" round led trailer clearance lights.3/4 hole on side for trailer light wires..
Angled side clearance lights mount design for better side light visualization from both side and rear..
Tail Light Guard Box for Trailers, Utility Trucks etc. and Can be mounted to the side, top or bottom of your trailer..

Check Stock

PSEQT 6'' Rectangle Marker Lights Red LED Side Tail Clearance Pickup Trailer Lights Waterproof with 20 Diodes and High Low Brightness Front Rear Turn Signal Marker Lights

✅【20LED Truck Side Lights】4 x 6'' rectangle side lights uses all-transparent integrated design and has built-in 20pcs LED diodes. Light color: Red.
Working temperature: -40℃ to 75℃. 3-wire connection design, high and low light dual function..
✅【Wide Use】Rectangle Red Side Lights fit for side marker lights, clearance lights, turn signal lights, running Lights, tail Lights, stop turn tail lights, car auxiliary turn signal lights, etc. Widely used for 12V Pickups, Trailers, Trucks, Heavy Trucks, Wrangler, Van, SUV, ATV, UTV, RV, RZR, F350, F450, Caravan, Camper, Motorhome, Boat, Lorry, Bus, etc..
✅【Fully Enclosed Integrated Side Marker Lights】Made of sturdy PMMA material and 5mm LED lamp beads, fully sealed waterproof, moisture-proof and dustproof, can work in various environments such as rain, fog and snow. 20 high spotlight beads output high-brightness red light, low power consumption and energy saving..
✅【Easy to Install】3-wire connection: Black is ground, Red is low brightness as Tail/Running Lights, White is high brightness as Brake/Stop/Turn Lights. Surface mount, fit for front, rear and side of the car. Can be installed anywhere you need, as long as the size is right..

Check Stock

Bugleman Compatible Offset Picatinny Rail Two Aluminum 3-Slot Rail Mount Offset Rail Mount Accessories

...lot Offset Side Picatinny Rail Mount. Universal Standard System Nuts and Screws Can be compatible with all standard handguard system at the same time, avoiding your trouble of replacement..
❖【Compatible With Varieties of Accessories】 Bugleman Two Offset Rail Direct Attach to Surefire M300/600 series Scout Lights or Other MIL-STD-1913 Picatinny light, the Optional Light Mount BLock and Rings can also be used to attach hand held lights with a diameter from 0.75 to 1.03 in..
❖【45° Offset Design Two 3 Slots Picatinny Rails】 Two 3-Slot Offset Side Picatinny Rails Design With 45° Offset Design Bring you Ambidextrous Platform To Mount Flashlights or Other Tactical Offset Attachments At Both The 11 and 1 O'clock Positions on all Handguards and Forends, Without any Obstruction..
❖【Solid & Durable】 Precision Machined out of Premium Aluminum Alloy, our High Strength Picatinny Rail Section Offers the Durable & Solid Safe Performance for Better Using Experience..
❖【100% Moneyback Guarantee】 We Provide 100% Satisfaction Money-back Guarantee When you don’t Like Our Product and Want Refund. You also can Contact us via our After-sales Support Email. Choose us, you will Get 2 x 3 Slots Offset Rails, 5 x T-Nuts, 5 x Screws, 2 x Allen Wrench....

Check Stock