Top Shutter Spring Steel Strip Reviews

Draft Blocker - 4'' Inch Backdraft Damper Duct - Draft Stopper - Backflow Preventer - Inline Fan Vent - Vent Deflector (4'' Inch)

...ts, vents and other HVAC applications.
INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different. Size: 4'' Inch.

Check Stock

Maitys 40 Pieces Shutter Repair Pins Spring Loaded Repair Pins Replacement Repair Pins Plantation Shutter Pins for Windows, White

Large quantity: you will receive 40 pieces of shutter repair pins, sufficient quantity that will satisfy your various using and replacing needs, you can also share it with your friends and families.
Size detail: each piece of replacement repair pin measures approx. 0.8 x 0.2 x 0.1 inch, suggested hole dimension for pin installation is 1/4 inch in diameter, and the diameter of the shutter is about 5/32 inch.
Easy to use: these spring loaded repair pins work as good tools for DIY homeowner to use easily and replace broken or missing shutter pins, spring pins, staples and more.
Sturdy material: our replacement repair pins are made of quality plastic, no studs necessary, non-rusting and durable, reliable for you to use for a long range of time.
Wide applications: these plantation shutter pins are designed in classic white color, suitable for most colors and textures of slates of shutter, brings you much convenience.

Check Stock

Hon&Guan 10 inch Backdraft Damper, One-Way Airflow Ducting Insert Backflow Preventer Duct Draft Blocker, HVAC Inline Fan Vent

【Material】The 10 inch backdraft damper and the flap leaves is made of a Galvanized steel, the Axis are made of aluminum, while the spring are made of carbon steel..
【Installation method】The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
【Wide applications】Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications..
【Lightweight valve wings】The valve wings open under the pressure created by the airflow.
when the air flows in the opposite direction, it is automatically closed under the action of the spring, so as to cut off the flow..
【Backdraft Shutter】Hon&Guan Draft Blocker designed to improve ventilation by preventing air from re-circulating when the fans are not in use, rubber ring ensure 100% closure and quiet closing..

Check Stock

Repair Plantation Shutters: 15 Spring Loaded Shutter Pins + 15 Tilt Rod Louvers Staples, by Amazing Drapery Hardware

15 PCS Tilt Rod, Louvers Staples 3/16" width x 5/8" long.
15 PCS Spring Loaded Shutter Repair Pins.
Staples to fix your tilt rod. Shutter pins to fix your vanes..

Check Stock

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Deflector Silver

【Material】The 4 inch backdraft damper is made of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..

Check Stock

Miele Performance Pack 16 Type U AirClean Genuine FilterBags + Genuine AH30 HEPA Filter

This Performance Pack Model Fits All Miele Upright Vacuums Models Starting With U1 Or S7.
Comes With 16 Genuine Miele U Airclean FilterBags, 1 Genuine Miele HEPA Air Clean Filter AH-30 and 4 Pre-Motor Protection Filters.
The Miele U Airclean Dustbag Has a Hygiene Shutter Built-In to Prevent Dirt and Debris from Re-Entering Your House. The Hygiene Shutter is Spring-Loaded so as Soon as You Open the Machine the Shutter Will Close Not Allowing Any Dirt to Escape. The Collar of the Bag Also Contains a Rubber Seal to Ensure All of the Dirt Picked Up is Contained within the Bag.
The HEPA Filter Actually Traps 99.99% of all Particles as Small as 0.3 of a Micron. Dust Mite Feces and Pollen are No Match for the Miele HEPA Filter!.

Check Stock

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Vent Deflector (4 in)

【Material】The 4 inch backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..

Check Stock

Spiral Curry Comb ( colors may vary )

Combines the desired flexibility with strength.
Long wearing teeth that will not bend or break.

Check Stock

Schellenberg Rollodrive 65 Plus 22766 Electric Belt Winder - White

For roller shutter profiles with a deck height of 37 mm (System Mini).

Check Stock

Zero Offset Flat Hinge for Exterior Shutters, Stainless Steel (Pair)

(2 Pair) 6" NY Style L-Hinges 1 1/2" offset.
(2 Pair) Plate Pintles 1 1/2" offset (3/8" Dia. pintle).
Hinges, Pintles, Shutter Dogs are stainless steel w/ Black UV coating.
All screws and fastners are stainless steel.

Check Stock

1-1/2\ Offset Shutter Pintles (Pair) Stainless Steel

(2 Pair) 6" NY Style L-Hinges 1/2" offset.
(2 Pair) Plate Pintles 1/2" offset (3/8" Dia. pintle).
Hinges, Pintles, Shutter Dogs are stainless steel w/ Black UV coating.
All screws and fastners are stainless steel.

Check Stock

RCK Sales Holland Smoker Gas Grill Cast Iron Replacement Round Burner 9 1/8

Holland Gas Grill Replacement Burner Cast Iron.
9-1/8″ Length x 3-3/4″ Diameter (always measure old burner).
Stainless Steel Air Shutter & Stainless Steel Air Shutter Screen.

Check Stock

Miele Performance Pack 16 Type GN AirClean 3D Efficiency Genuine FilterBags + Genuine AH30 HEPA Filter + 4 Genuine Pre-Motor Protection Filters

This Performance Pack Fits These Models ONLY: – The Miele S400i Series – The Miele S600 Series – The Miele S2000 (S2) Series – The Miele Classic C1 Series.
Comes With 16 Genuine Miele GN Airclean FilterBags, 1 Genuine Miele HEPA Air Clean Filter AH-30 and 4 Pre-Motor Protection Filters.
The Miele GN Airclean Dustbag Has a Hygiene Shutter Built-In to Prevent Dirt and Debris from Re-Entering Your House. The Hygiene Shutter is Spring-Loaded so as Soon as You Open the Machine the Shutter Will Close Not Allowing Any Dirt to Escape. The Collar of the Bag Also Contains a Rubber Seal to Ensure All of the Dirt Picked Up is Contained within the Bag.
The HEPA Filter Actually Traps 99.99% of all Particles as Small as 0.3 of a Micron. Dust Mite Feces and Pollen are No Match for the Miele HEPA Filter!.

Check Stock