Top Shure Mv88 Reviews

Shure M44-7 Standard DJ Turntable Cartridge

  • Combining the Shure unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7's rugged construction is highly durable, but will not unduly wear your vinyl. With a 9.5 mV output, the M44-7 produces powerful, resonant sound..
  • Product Specs: Tone Arm Mount = Standard 1/2 inch.
  • Output Voltage = Typical at 1 kHz, 9.5 mV RMS at 5 cm/sec Peak Velocity.
  • Recommended Load = 47 kilohms in Parallel with 450pf.
  • Tracking Force = Effective at Stylus Tip.
  • Stylus Cantilever = Shure Type S, Heat-Treated Aluminum Alloy/Tubular, 1.6 mm Wall Thickness / 34.5 mm Diameter.
  • Diamond Stylus Tip = Polished Natural Gemstone (Spherical) with 0.7 mm Radius.
  • Product Specs (cont'd): Frequency Response = Essentially Flat from 20 to 20,000 Hz.
  • Channel Separation = Typical at 1 kHz: 20 dB.
  • Accessories Included: Attached Flip-Down Stylus Guard, Headshell Screwdriver (Phillips), Extra Set of 4 Headshell Wires (4-99), Stylus Cleaning Brush, Headshell Weight (3 grams), User Guide, Mounting Hardware, Stylus Guard.
Check Stock

For Shure Sm58 and Shure Sm7b Boom Arm, Shure Mv7 Desk Mic Stand Perfect For Gaming and Recording, Microphone Boom Arm with Pop Filter for Shure Series Mic.

  • [Professional design]: This black boom arm Specially designed for shure sm7b and shure series mic which can hold your shure sm7b microphone firmly.So that you can better show your voice in recording and live broadcasting.Note: package Not included shure microphone..
  • [Extraordinary black boom arm]:The blackshure mv7 boom arm can be matched with your shure series microphone, so that your shure sm7b microphone can be better matched with the black bracket, so as to show your extraordinary personal image..
  • [Adjustable and stable]: This shure microphone boom arm has a universal movable steering knuckle, which allows you to freely adjust the direction of the microphone to broadcast or sing. The scratch resistant base has a built-in anti-skid pad to ensure stability and protect the desktop from damage.The base wider mouth up to 2 inch/5cm to fit most desktop to fix the base..
  • [Strong bearing capacity]: this black microphone arm is made of strong steel, which is strong enough to keep the shure series microphone in a good position without "sinking" or "sinking",maximum load: about 2 lbs / 1.0 kg..
Check Stock

NEW DIAMOND NEEDLE STYLUS FOR SHURE M44 M44-7 M447 4759-D7C 759-DE

  • Combining the Shure unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7's rugged construction is highly durable, but will not unduly wear your vinyl. With a 9.5 mV output, the M44-7 produces powerful, resonant sound..
  • Product Specs: Tone Arm Mount = Standard 1/2 inch.
  • Output Voltage = Typical at 1 kHz, 9.5 mV RMS at 5 cm/sec Peak Velocity.
  • Recommended Load = 47 kilohms in Parallel with 450pf.
  • Tracking Force = Effective at Stylus Tip.
  • Stylus Cantilever = Shure Type S, Heat-Treated Aluminum Alloy/Tubular, 1.6 mm Wall Thickness / 34.5 mm Diameter.
  • Diamond Stylus Tip = Polished Natural Gemstone (Spherical) with 0.7 mm Radius.
  • Product Specs (cont'd): Frequency Response = Essentially Flat from 20 to 20,000 Hz.
  • Channel Separation = Typical at 1 kHz: 20 dB.
  • Accessories Included: Attached Flip-Down Stylus Guard, Headshell Screwdriver (Phillips), Extra Set of 4 Headshell Wires (4-99), Stylus Cleaning Brush, Headshell Weight (3 grams), User Guide, Mounting Hardware, Stylus Guard.
Check Stock

LATCH LAKE micKing 2200 Boom Microphone Stand (Black)

  • Professional Desktop Broadcast/Podcast Microphone Boom Stand with On-Air Indicator Light.
  • Built-In LED Indicator Light Ring with Brightness Control & Red/Blue/Violet Color Modes.
  • Easily Clamps or Mounts Directly to Desks, Tables & Similar-Sized Surfaces 2.17”/55mm Max in Thickness.
  • Rotates Full 360-Degress with Minimal Noise with Multiple Knobs for Securing Mic at Desired Angle.
  • Spring-Loaded Articulating Arm with 4.4 lbs./2 kg Max Weight Capacity & 32.25”/940mm Max Extension.
  • 3”/76mm Extension Adapter with Standard 5/8"–27 Mic Threads Included for XLR Cable Clearance, Perfect for Shure SM7B, Shure MV7 Models.
  • Product Dimensions: 18”/457mm (Lower Arm), 18”/457mm (Upper Arm), 3”/76mm (Mic Arm), Net Weight: 4.2 lbs./1.9 kg..
Check Stock

Jada Toys Marvel X-Men 20 Pack Die-Cast Figures, 1.65' Scale Collectable Figurine 100% Metal

  • Stands at about 1. 65-Inches and weighs about 30G..
  • Exclusive figures unique Only to this 20-Pack..
  • Contains the following die-cast metal mini-figures: Scarlet witch (Mv62), Colossus (Mv68), Storm (Mv69), Wolverine (Mv70), Jean grey (Mv71), Rogue (Mv72), Emma frost (Mv73), Magneto (Mv74), Psylocke (Mv75), Cyclops (Mv76), beast (Mv77), iceman (Mv78), Kitty pride (Mv84), mystique (Mv85), Sabretooth (Mv86), Phoenix (Mv87), Professor x (Mv88), havoc (Mv89), x-23 (Mv90), jubilee (Mv91)..
Check Stock

Gator Frameworks Deluxe Desk-Mounted Broadcast Microphone Boom Stand For Podcasts & Recording; Integrated XLR Cable (GFWBCBM3000)

  • Rotates Full 360-Degrees with Minimal Noise.
  • Fixed, Internally Guided 10’/3. 05m XLR Cable Included.
  • Spring-Loaded Articulating Arm with 4. 4 lbs. /2 kg Max Weight Capacity & 32. 25”/940mm Max Extension.
  • Easily Mounts or Clamps to Desks, Tables & Similar-Sized Surfaces 2. 17”/55mm Max in Thickness.
  • Standard 5/8”-27 Mic Threads for Connecting Most Podcast and Vocal Microphones, Including Shure SM7B, Shure MV7 Models.
  • Exterior Dimensions: 20. 50”/520mm (L) x 4. 75”/120mm (W) x 2. 50”/64mm (H), Net Weight: 3. 4 lbs. /1. 54 kg.
Check Stock

Gator Frameworks Deluxe Desk-Mounted Broadcast Microphone Boom Stand For Podcasts & Recording; Integrated XLR Cable (GFWBCBM3000)

  • Rotates Full 360-Degrees with Minimal Noise.
  • Fixed, Internally Guided 10’/3. 05m XLR Cable Included.
  • Spring-Loaded Articulating Arm with 4. 4 lbs. /2 kg Max Weight Capacity & 32. 25”/940mm Max Extension.
  • Easily Mounts or Clamps to Desks, Tables & Similar-Sized Surfaces 2. 17”/55mm Max in Thickness.
  • Standard 5/8”-27 Mic Threads for Connecting Most Podcast and Vocal Microphones, Including Shure SM7B, Shure MV7 Models.
  • Exterior Dimensions: 20. 50”/520mm (L) x 4. 75”/120mm (W) x 2. 50”/64mm (H), Net Weight: 3. 4 lbs. /1. 54 kg.
Check Stock

Gator Frameworks Professional Desktop Broadcast/Podcast Microphone Boom Stand with On-Air Indicator Light (GFWMICBCBM4000)

  • Professional Desktop Broadcast/Podcast Microphone Boom Stand with On-Air Indicator Light.
  • Built-In LED Indicator Light Ring with Brightness Control & Red/Blue/Violet Color Modes.
  • Easily Clamps or Mounts Directly to Desks, Tables & Similar-Sized Surfaces 2.17”/55mm Max in Thickness.
  • Rotates Full 360-Degress with Minimal Noise with Multiple Knobs for Securing Mic at Desired Angle.
  • Spring-Loaded Articulating Arm with 4.4 lbs./2 kg Max Weight Capacity & 32.25”/940mm Max Extension.
  • 3”/76mm Extension Adapter with Standard 5/8"–27 Mic Threads Included for XLR Cable Clearance, Perfect for Shure SM7B, Shure MV7 Models.
  • Product Dimensions: 18”/457mm (Lower Arm), 18”/457mm (Upper Arm), 3”/76mm (Mic Arm), Net Weight: 4.2 lbs./1.9 kg..
Check Stock

CODN Studio Recording Microphone Isolation Shield with Pop Filter & Tripod Stand, High Density Absorbent Foam to Filter Vocal, Foldable Sound Shield for Blue Yeti and Condenser Microphones…

  • Rotates Full 360-Degrees with Minimal Noise.
  • Fixed, Internally Guided 10’/3. 05m XLR Cable Included.
  • Spring-Loaded Articulating Arm with 4. 4 lbs. /2 kg Max Weight Capacity & 32. 25”/940mm Max Extension.
  • Easily Mounts or Clamps to Desks, Tables & Similar-Sized Surfaces 2. 17”/55mm Max in Thickness.
  • Standard 5/8”-27 Mic Threads for Connecting Most Podcast and Vocal Microphones, Including Shure SM7B, Shure MV7 Models.
Check Stock

Shure RPW110 Wireless PG58 Cartridge, Housing Assembly with Grille

  • Compatibility: Shure PG58 Microphone Transmitters.
Check Stock

Mictop Desktop Mic Stand Portable Foldable Tripod with Mic Clip Holder Adjustable Microphone Stand For Dynamic Microphone Like Samson Q2U Shure SM58 SM57 PGA48 PGA58 etc.

  • ...over, even under the action of external force. Its adjustable nature means that you can position the stand in a variety of positions..
  • Suitable for dynamic microphone: Microphone clip with anti-slip and fixed function for all handheld microphone, compatible with ATR2100-USB, AT2005-USB, Samson Q2U, Behringer Xm8500, Shure SM58-LC PGA48/PGA58 and other dynamic microphones..
  • Convenient to carry: This is a versatile professional mic stand for desktop application, suitable for singing, screencasts, studio, podcasts, video chats, meetings, lectures, broadcasts, live interviews and other, which is suitable to be carried anywhere..
  • Easy to use: The package includes two parts, Microphone Tripod and Clip Holder. Internal thread of the microphone clip and standard 3/8" to 5/8" adapter which is attached to the mic clip so it easily screws on.With the screw adapter, this mic stand is also compatible with Blue Yeti, Snowball, Shure SM7B, Shure MV7, Rode PodMic..
  • Note: Make sure one of the three legs is to the front of the mic, otherwise it will topple. Also,it supports a maximum weight of 6.6 lbs, balance a stable microphone placement..
Check Stock

Boseen Mic Stand Extension Tube, 5/8' Female to 5/8' Male Microphone Extension Pipe for Desk Stands & Arm Stand, 2Pcs

  • Extension Tube - This extension tube extend the length of your boom arm or the height of your mic stand, which moves the connection farther and allows the microphone to be as close to you as possible for better recording..
  • Wide Application - The package includes a 5/8" male to a 3/8" female metal adapter and a rod which has a 5/8" male thread on one end and a 5/8" female thread on the other end, both together can fit the most boom arms, mic stands, shock mounts and most microphones, such as Shure SM7b, Shure MV7, Rode Podmic, Blue Yeti Snowball, etc..
  • High Quality Material - It has black powder-coated finish and it is made of aluminum alloy, which makes the tube strong and stable without losing compact and lightweight. So you don't need to worry about the microphone falling off during use..
  • Easy to Install - Just screw the entension rod and the metal adapter if you need onto your boom arm or microphone stand or other..
  • Best Service - We promise to provide timely response within 24 hours and lifelong technical guidance..
Check Stock

SUNMON MV7 Shock Mount with Pop Filter for Shure MV7 Microphone, MV7 Shock Mount Reduces Vibration Noise Matching Mic Stand Boom Arm

  • 【Upgraded Shock Mount】 - Specially designed for Shure MV7 microphone for better shock absorption. No more frustrating post-production editing..
  • 【Exquisite Design】 - Shock mount rubber mat between the metal bolt and microphone attaches that prevent scratches from your microphone or mount and will bitter cinch down the bolt..
  • 【Compatibility】 - Perfectly match most boom arm stand. Double-size thread is specially designed to fit US and EU microphone stand. Note: Not Included Mic Stand and Shure SM7B Microphone..
  • 【3 Layer Desgin 】– Pop filter is made from double layered steel meshs in outside and one layered foam windscreen in middle. It optimizes air current diffusion for maximum audio transparency that eliminates plosives far more effectively than fabric filters..
  • 【Adjustable Gooseneck】- The steel metal gooseneck holder fully supports the filter's weight and keep it in place. You can adjust the angle and distance between the screen and the microphone to best fit your needs for yours lovely voice..
Check Stock