Top Short Radius Bends Reviews

3rd Generation Hydraulic Tubing Bender for Round Tubing, Hydraulic Pipe Bender for Roll Cage Tubing, 1.50 Inch Round Dimple Die

• Bends round tubing up to 90 degrees which works perfect for roll cages, frame crossmembers, and chassis components.
• Incremental marks cast into dies makes it easy to reproduce bends.
• For use with up to .110" wall thickness mild steel or .096" wall thickness chromoly round tubing.
• Comes with one aluminum die in the size of your choice 1", 1-1/4", 1-1/2", 1-5/8" or 1-3/4".
• 7" bend radius dies are also sold individually if you need to bend a different size tubing later.

Jimmy, The Well Dressed Man [feat. Eddie Jackson]

• Construction: The SLXM DX features an ergonomically curved poplar body, through-body maple neck with scarf joint, and graphite reinforcement for rock-solid stability. Hosting 24 jumbo frets and black sharkfin inlays, its 12-16 inch compound radius bound maple fingerboard curves more dramatically at the nut for easy chording and flattens out as it approaches the neck joint for low-action bends without fretting out.
• Mechanism: Duncan Designed alnico HB-103N neck and high-output ceramic HB-103B bridge humbucking pickups power this metal beast with an expansive voice loaded with crunchy, full-bodied tone ideal for brazen lead work or punchy rhythm runs.
• Sleek Look: Sleek and sophisticated, the X Series Soloist SLXM DX is decked out in a classic Snow White finish with gold hardware and pointy black headstock.
• 12-16 Inch Compound Radius: Jackson pioneered the use of the innovative 12-16 Inch compound radius design, in which the maple fingerboard gradually flattens toward the heel from its more rounded profile at the nut. This makes for comfortable and nat....

S.R.Smith PR-500 Swimming Pool Hand Rail with Flange

Zoeller 30-0181 PVC Plastic Check Valve 1-1/2 Inch

• Flapper bends over a radius to eliminate sharp 90-degree edges.
• Capable of vertical or horizontal installation.
• Slip x slip for 4.3 PSI (10 feet of head) at 130°F.

Eastern Bikes BMX Handlebar Atom 9.5\ Rise - Chrome

• 4130 chromoly with post-weld heat-treatment.
• Large radius bends for greater durability.

MBRP S61180P 5" Aluminum Cat Back, Single Side Exit for Dodge Diesel

• Fits 2004-2007 Dodge 2500/3500 Cummins "600/610".

Fender Jimi Hendrix Stratocaster - Olympic White

• The reverse headstock and reverse-slanted ’65 American Vintage bridge pickup, accurately reproduces Jimi’s legendary signature tone.  .
• A maple fingerboard with 21 medium jumbo frets, a modern fingerboard radius, and comfortable “C” shaped neck offers comfortable chording and effortless string-bending..
• From dive-bombs to sweet shimmering bends, a 6-saddle Synchronized Vintage Tremolo bridge offers the same expressive pitch control Jimi used to create his signature sound.   .
• Includes Deluxe Fender Gig-bag and Limited Lifetime warranty.  .

EART Headless Electric Guitar GW2 fixed Bridge for 6 String Electric Guitar Right Solid-Body Electric Guitar Blue

• Roasted Padauk Body with Burled Maple Veneer：Padauk has a luxurious reddish brown colour and provides a punchy tone.Rounded with a burled maple veneer, GW2 excels in both looks and tone..
• 5 piece Roasted Maple/Padauk Neck：Multi-piece neck construction ensures excellent stability for lower tunings and heavier gauge of strings..
• Hand Polished Stainless Steel Frets：Stainless steel frets provide unrivaled durability and smooth playing surface for nice and easy big bends. Each fret ends are also hand-dressed for playing comfortability..
• U to C Compound Neck Profile and Compound Radius: GW2 has a unique U to C compound neck profile with a thicker shoulder on the lower frets, slowly tapers down to a slimmer C to higher frets. Along with a 9.5” to 14” compound fingerboard radius, GW2 provides excellent playability for both chording and soloing..

FLEXTRIM #WM110 - .25\ x .25\ Flexible Quarter Round - 8' feet Long

• Flexible polyurethane resin - bends like a belt - only recommended for painting applications.
• This is an IN STOCK item (usually ships within 24 to 48 hours).
• For interior and exterior use - will not warp, rot or crack when exposed to high moisture.
• Can be installed with normal woodworking tools, comes in a light tan color.
• Will bend/flex like a belt to fit a minimum radius of 6" inches, for curved walls, stairways, columns and arched jambs.

EART NK-C1 Classic Electric Guitar Maple Fingerboard,Stainless Steel Frets,Flame Maple Veneer-Blue

• Mahogany Body with Flame Maple Veneer:Mahogany is known for superb resonance and rich, lower-mid focused tone.Combined with a gorgeous flame maple veneer, EART NK-C1 is dressed to kill..
• Contoured Body：Traditional model guitars are known to have a “slab” body that have bad ergonomics. NK-C1 has a forearm contour and a belly cut to improve players’ comfort. The scooped heel joint also helps with shredders for easier high frets access..
• Hand Polished Stainless Steel Frets：Stainless steel frets provide unrivaled durability and smooth playing surface for nice and easy big bends. Each fret ends are also hand-dressed for playing comfortability..
• U to C Compound Neck Profile and Compound Radius： NK-C1 has an unique U to C compound neck profile with thicker shoulder on the lower frets, slowly tapers down to a slimmer C to higher frets. Along with a 7.25” to 9.5” compound fingerboard radius, NK-C1 provides excellent playability for both chording and soloing..

EART Electric Guitar SSS Single Coil Pickups,Solid-Body,Stainless Steel Frets Right Handed-Rosewood Fingerboard-Red

• Roasted Maple Neck and Roasted Mahogany Body：Roasted maple neck provides excellent stability and gorgeous caramel finish.The mahogany wood used for the body was also roasted for stronger mids and slightly lighter weight..
• Bone Nut：Bone is a harder natural material and it has been favored by many luthiers for higher-end instruments due to its sustain and natural lubricating property..
• Hand Polished Stainless Steel Frets：Stainless steel frets provide unrivaled durability and smooth playing surface for nice and easy big bends. Each fret ends are also hand-dressed for playing comfortability..
• U to C Compound Neck Profile and Compound Radius： SSS has a unique U to C compound neck profile with a thicker shoulder on the lower frets, slowly tapers down to a slimmer C to higher frets. Along with a 7.25” to 9.5” compound fingerboard radius, SSS provides excellent playability for both chording and soloing..

EART Guitars T-380 Modern Humbucker Pickups Double Coil Split Two Point Tremolo Bridge Solid Body Electric Guitars

• Roasted Maple Neck and Roasted Mahogany Body:Roasted maple neck provides excellent stability and gorgeous caramel finish. The mahogany wood used for the body was also roasted for stronger mids and slightly lighter weight..
• Bone Nut:Bone is a harder natural material and it has been favored by many luthiers for higher-end instruments due to its sustain and natural lubricating property..
• Hand Polished round end Stainless Steel Frets:Round end finished Stainless steel frets provide unrivaled durability and smooth playing surface for nice and easy big bends. Each fret ends are also hand-dressed for playing comfortability..
• U to C Compound Neck Profile and Compound Radius:EART guitars has a unique U to C compound neck profile with a thicker shoulder on the lower frets, slowly tapers down to a slimmer C to higher frets. Along with a 9.5’ to14’ compound fingerboard radius..
• Special Wiring:Extra mini switch with ON-ON function,work with 3 ways switch ,you can get 6 kinds different tones to get the different sound you want..

EART Electric Guitar 6 String Right Solid-Body Electric Guitar, poplar-burl veneer- Heavy metal, solo, colorful

• Roasted Padauk Body with Burled Poplar Veneer：Padauk has a luxurious reddish brown colour and provides a punchy tone.Rounded with a burled poplar veneer, Explorer-I excels in both looks and tone..
• 5 piece Roasted Maple/Walnut Neck：Multi-piece neck construction ensures excellent stability for lower tunings and heavier gauge of strings..
• Bone Nut：Bone is a harder natural material and it has been favored by many luthiers for higher-end instruments due to its sustain and natural lubricating property..
• Hand Polished Stainless Steel Frets：Stainless steel frets provide unrivaled durability and smooth playing surface for nice and easy big bends. Each fret ends are also hand-dressed for playing comfortability..
• U to C Compound Neck Profile and Compound Radius： H6 has a unique U to C compound neck profile with a thicker shoulder on the lower frets, slowly tapers down to a slimmer C to higher frets. Along with a 9.5” to 14” compound fingerboard radius, Explorer-I provides excellent playability for both chording and soloing..