Top Short Pass Filter Reviews

Sundown Audio Salt Series Monoblock Digital Class-D Amplifier (Salt-2 2000W Rms)

Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..

Check Stock

Low Profile Marine Subwoofer System - 1000 Watt 8 Inch Slim Active Waterproof Amplified Bass Speaker - Underseat Mount Audio Sound Amplifier Box For Small Boat, Marine Vehicles - Lanzar AQTB8 (White)

8'' Slim Marine Woofer - Phase Shift Switch : 0 or 180° - Thermal , Short and Overload Protection Circuits - Dimension : 14.5''(D) x 9.5''(W) x 3''(H).
RCA Low Level Input - Adjustable Input Sensitivity : 0.2V-3V - Fuse : 2 x 15A - Weight : 10.5 LBS.
High Level Input - 0 to +12Db Variable Bass Boost (@ 45Hz) - Max Power : 1000 Watts.
Green and Red LED Power Status Indicator - Low Pass Filter (50-150 Hz) - RMS Power : 300 Watts.
Remote Level Control - Soft Delay Remote Turn-On - RMS Power of Amplifier : 100 Watts.
8'' Slim Marine Woofer RCA Low Level Input High Level Input Green and Red LED Power Status Indicator Remote Level Control Phase Shift Switch : 0 or 180° Low Pass Filter (50-150 Hz) Soft Delay Remote Turn-On Thermal , Short and Overload Protection Circuits 14.5''(D) x 9.5''(W) x 3''(H).

Check Stock

Sundown Audio SAE-2000D V.3 Monoblock 2000W RMS Digital Class D Amplifier SAEv3-2000D

Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..

Check Stock

BOSS Audio Systems Elite SLIM10 Amplified Car Subwoofer - Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, for Vehicles Needing Bass with Limited Space

...im design, there are a few installation options.
Pulse Width Modulated - PWM simplifies power supplies. It controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. Efficiency. Increased reliability.
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the SLIM10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the SLIM10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Specs - Dimensions: 13.58” x 10.43” x 3.15”, Weight: 10.45 lbs. Phase control. LED status indicator. Thermal, Short and Overload Protection Circuits. ....

Check Stock

BOSS Audio Systems BASS10 Amplified Car Subwoofer - Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, for Vehicles Needing Bass with Limited Space, Remote Subwoofer Control

...im design, there are a few installation options.
Pulse Width Modulated - PWM simplifies power supplies. It controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. Efficiency. Increased reliability.
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BASS10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BASS10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Specs - Dimensions: 14” x 12.3” x 3.3”, Weight: 11.35 lbs. Phase control. LED status indicator. Thermal, Short and Overload Protection Circuits. High ....

Check Stock

BOSS Audio Systems BASS8 8 Inch Under Seat Powered Car Subwoofer – 800 High Output, Low Profile, Built in Amplifier, for Truck, Boxes and Enclosures, Remote Subwoofer Control

...im design, there are a few installation options.
Pulse Width Modulated - PWM simplifies power supplies. It controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. Efficiency. Increased reliability.
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BASS8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BASS8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Phase Control - Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”.

Check Stock

Memphis Audio VIV900.5 75W x 4 + 500W x 1 Car Amplifier

Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.

Check Stock

Rockville RW10CA 10" 800 Watt Under-Seat Slim Amplified Car Subwoofer +Wire Kit

Rockville RW10CA 800 Watt 10” Slim Car Subwoofer 800 Watts Peak / 200 Watts RMS PWM MOSFET Power Supply.
Low Level RCA Input High Level Inputs with Auto Turn-On Technology Adjustable Input Sensitivity.
Soft Delayed Remote Turn-On Thermal Protection Circuit, Short Protection Circuit Overload Protection Circuit.
Phase Switch: 0° or 180° Low Pass Filter: 50Hz - 150Hz Bass Boost: 0 - 18dB @ 45Hz.
Subwoofer Level Remote Control Built in Subsonic Filter @ 29Hz.

Check Stock

Sound Town STP Series Power Amp Plates for PA Speakers and Subwoofer (700W RMS,Class D, w/High-Pass Filter Outputs)

2 XLR-1/4" combo and 2 RCA inputs, 2 XLR (through, 100Hz high-pass respectively) and RCA outputs.
Deep and clean bass with dynamic bass enhancement and RMS dynamic processor and second-order IIR low-pass filter built in.
Over current and short circuit protection.
sturdy construction with integrated aluminum heat sink panel.

Check Stock

AUDIOPIPEMAP Audiopipe Amplifier D Class 1200 Watts

Mono channel operation, variable low-pass filter, Subsonic filter, Double side FR-4 PCB high quality SMD components, Overload, short circuit, thermal and low voltageSpecifications..
Wheeler Delta Series AR 15 Complete Brush Set, every home needs an electronics expert, someone who can decide if it makes sense to the latest equipments..
If you are a gadget freak, our Electronics catalog is your dream destination. If you’re still stuck at the basics, our elaborate product specifications shall handhold..
Most orders to ship same lightweight items ship and can to a PO BOX, most other ship via UPS FedEx..
Audiopipe APHDM1200 Amplifier D Class 1200 Watts offers the majority of the properties, It has countless elements including APHDM1200, APHD-M1200, model and volume..

Check Stock

BOSS Audio Systems BX55 2 3 Way Pre-Amp Car Electronic Crossover with Remote Subwoofer Control

Front / Rear / Sub Input, Front / Rear / Sub Outputs, Remote Subwoofer Control.
Front High Pass Filter 65Hz to 4.5 kHz, Rear High Pass Filter 65Hz to 4.5 kHz.
Variable Subwoofer Filter 40 Hz – 4200 Hz, Variable High Pass Filter 65 Hz – 4.5 kHz.
Crossover Slope 12 dB / Octave, Variable Subwoofer Phase 0 – 180 Degrees.
Variable Bass Boost 0 – 18 dB, Variable Bass Boost Frequency 25 Hz – 250 Hz.

Check Stock

Memphis Audio VIV400.4 SIX FIVE Series 400W 4-Channel Car Amplifier

65 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms) | 200 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode).
Front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) | Variable low-pass filter (50-5,000 Hz, 24 dB/octave) | Bandpass filter engages both.
Variable bass boost (0-18 dB at 45 Hz) on front and rear channels.
Dimensions: 10-15/16″W x 2-1/4″H x 8-1/4″D.

Check Stock

Rockford Fosgate Prime 750 Watt Class D 1 channel Amplifier

Tri-stage protection covers thermal, over-current and short circuits..
On-board PEQ (Punch Equalization) with 18 dB of boost at 45Hz.
Infrasonic filter. Low-Pass: Variable 50Hz – 500Hz at 12dB/Octave.

Check Stock