Top Shoring Scaffolding Reviews

AKRON PRODUCTS C-4 Floor Jack, 1 Pack

  • ...pairs]: The BISupply Adjustable Shore Jack Post House Support Jacks 1-Pack transforms 4x4 inch (10.2 cm) square lumber into a temporary support or non-primary support (not intended for permanent installation).
  • [Adjust the Size]: Fits bottom of a 4x4 inch timber post of any height.
  • 4-inch height adjustment thread for shoring tension.
  • 14.5 to 18.5 inch (36.8-47 cm) overall lifting shore height.
  • 3.5x6 inch (8.9x15.2 cm) base plate with (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes.
  • [Built to Last]: Constructed from coated steel for strength and longevity that resists rust and corrosion.
  • Square tube, round tube, and threaded plate welded to create singular floor joist jack post unit.
  • Load capacity up to 24,700 pounds / 12.4 ton (11,204 kg / 11.2 MT) dependent on 4x4 used.
  • [Stabilize Easily]: Place adjustable shoring jack on end of 4x4 inch wood post, secure post to shore jack, turn the tension handle for 4 inches of height adjustment, and secure 4x4 shore jack base (4x4 lumber required, not included.
  • nails/wood screws recommended, not required or included).
  • [Fit Anywhere]: 11.8x0.4 inch (30x1 cm) horizontal tension handle is removable and slides for use against an obstruction.
  • Base plate includes (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting h....
Check Stock

Little Giant 56212 Revolution and Xtreme Trestle Bracket Kit

  • This Trestle Bracket Kit is compatible with Xtreme and Revolution Models.
  • Use to support three different scaffolding heights as well as multiple workbench heights.
  • Made of the same super-strong aluminum as our heavy duty ladders for maximum security and durability.
  • Replaces expensive and labor-intensive scaffolding systems.
Check Stock

Werner SRS-72 6-Foot Steel Rolling Scaffold

  • 6-Feet multipurpose scaffolding with four 5-Inch locking swivel casters.
  • For interior or exterior use, All steel construction, Durable powder coated paint finish in yellow.
  • 1/2-Inch thick wooden deck with steel frame.
  • 1,000-Pound capacity, 29-Inch wide, fits through standard doorways.
  • Meets OSHA and ANSI scaffolding regulations.
Check Stock

Pro-Series GSSI Multi Purpose Scaffolding, 6-Feet

  • 6-Feet multipurpose scaffolding with four 5-Inch locking swivel casters.
  • For interior or exterior use, All steel construction, Durable powder coated paint finish in yellow.
  • 1/2-Inch thick wooden deck with steel frame.
  • 1,000-Pound capacity, 29-Inch wide, fits through standard doorways.
  • Meets OSHA and ANSI scaffolding regulations.
Check Stock

Little Giant Trestle Bracket Kit, fits Classic, Alta One

  • Compatible with many Little Giant Ladder models: See Product Description for compatible models.
  • Replaces expensive and labor-intensive scaffolding system, saving hundreds of dollars.
  • Use to support three different scaffolding heights as well as multiple workbench heights.
  • Made of the same super-strong aluminum as our heavy duty ladders for maximum security and durability.
Check Stock

Little Giant Ladder Systems 26362 Velocity Trestle Bracket Kit

  • Use to support three different scaffolding heights as well as multiple workbench heights.
  • Made of the same super-strong aluminum as our heavy duty ladders for maximum security and durability.
  • Replaces expensive and labor-intensive scaffolding systems, saving hundreds of dollars.
  • This trestle bracket kit is only compatible with the Little Giant Velocity, Defender, Leveler, Liberty and LT models.
Check Stock

Ariat Women's FR DuraStretch Flame Resistant Mid Rise Bootcut Jean, Oceanside Entwined, 29 Long

  • HEAVY DUTY LIFTING SHORE: The Ellis Heavy Duty Steel Lifting Shore provides temporary or permanent shoring support for heavy load applications. This lifting shore is designed to provide support in both residential and commercial structures..
  • EASY TO USE: To use this lifting shore, simply set the shore in place and use the 1" steel adjustment rod to adjust the the shore. Once the shore is in place and adjusted to the desired height, tighten the screw set to lock the nut and to set the shore in place as a permanent support solution..
  • SAFE & SECURE: Built with high quality steel, this lifting shore is built to be functional, long lasting, and durable. This patented design reduces the amount of friction caused when the shore is under load and increases its jacking capability. This product comes with a safety lock set screw to ensure safety..
  • SPECIFICATIONS: Range of Adjustment: 55" to 80", Safe Load Capacity: 34,000 lbs, Weight: 72 lbs, Top Plate: 8"x8"x1/2", Top Plate: 4-Holes 9/16" Diameter spaced 1" OC from edges, Acme Screw: 2.875" Diameter with Approx. 4 Acme Threads per inc....
Check Stock

US Cargo Control Enclosed Utility Trailer Shelving Kit, Convenient E Track Kit, Includes E Track Rails and Wood End Sockets, Easily Secure Cargo in Your Utility Trailer

  • CONVENIENT TRAILER E TRACK KIT - E Track Kits make it easy to get started with E-Track or to pick up coordinated essentials. This kit includes components well-suited for creating cost effective shoring beams in your enclosed utility trailer..
  • STRONG AND DURABLE - Our E Track Rails are made of durable galvanized 12-gauge steel. You can create an inexpensive and strong shoring beam using an ordinary piece of 2 x 4 lumber along with the included wood end sockets. Lumber Not Included..
  • EASY TO USE - The included wood end sockets easily snap in and out of the E Track Rails allowing you to customize and re-adjust your setup as needed..
  • E TRACK KIT INCLUDES - (4) 5' Horizontal E-Track Rails, (8) Wood End Sockets for E-Track. NOTE: Hardware (screws/bolts) to fasten the E Track are not included. NOTE: Hardware (screws/bolts) to fasten the E Track is not included..
  • SPECS - Enclosed Utility Trailer Shelving Kit | E Track Rails Made of 12-gauge Galvanized Steel | Wood End Socket Product Weight: 0.9-pounds each | Quantity: 1 Trailer E Track Kit.
Check Stock

Little Giant Ladder Systems 14010-001 13-Feet 250-Pound Duty Rating Alta-One Model 13 Ladder System

  • Use to support three different scaffolding heights as well as multiple workbench heights.
  • Made of the same super-strong aluminum as our heavy duty ladders for maximum security and durability.
  • Replaces expensive and labor-intensive scaffolding systems, saving hundreds of dollars.
  • This trestle bracket kit is only compatible with the Little Giant Velocity, Defender, Leveler, Liberty and LT models.
Check Stock

Akron Products Adjustable Shore Jack - 4x4

  • SHORING JACK - Transforms a nominal 4 x 4 lumber into an adjustable building product..
  • NON-PRIMARY SUPPORT - Recommended as a temporary or non-primary support..
  • HEAVY DUTY - Load capacity dependent on a 4 x 4 used up to 24,700 lbs..
  • ADJUSTABLE - Easy to assemble, easy to install..
  • MULTIPLE USES - Construction projects, Repairs or installations, renovations, sagging floors, and more..
Check Stock

WJIANLIN Scaffolding, Portable Folding Scaffold, Work Platform Adjustable Height, Metal Tech Scaffolding Equipment Tools, for Home Improvement, Patching Drywall or Cleaning Windows

  • Help your scaffolding meet both ANSI and OSHA jobsite standards.
  • Features two lockable gates for easy access.
  • Designed to fit with the WEN 6.25 ft. Rolling Steel Scaffolding (models 31110 and 31110T).
  • Universal fit installs easily on to the majority of square baker-style scaffolds.
  • Measures in at 69.3 x 29.25 x 41.4 inches in size.
Check Stock

MetalTech 6 Foot High Portable Adjustable Platform Jobsite Series Baker Mobile Scaffolding Ladder with Locking Wheels

  • PORTABLE: Portable scaffolding platform is perfect for DIY projects and indoor painting.
  • FEATURES: Fits through standard door openings making it very portable to move from room to room.
  • Perfect for drywall and painting applications that are hard to reach.
  • Use it as a cart to haul your equipment to and from job sites.
  • STACKABLE: Multiple scaffolding units can be stacked when using the optional outriggers for stability.
  • INCLUDES: Includes precision welded ladder end frames, side rails, platform, double-locking caster wheels and locking pins.
  • Includes 5-inch double lock non-marking caster wheels.
  • ADJUSTABLE PLATFORM: Platform height can be adjusted at 2-inch increments from 27 to 73 inches.
Check Stock

Little Giant Ladders, Velocity, M13, 13 Ft, Multi-Position Ladder, Aluminum, Type 1A, 300 lbs Weight Rating, (15413-001)

  • Dimensions - Max A-frame height: 5'1'' | Max Extension Height: 11' | Max scaffolding height: 3' | Max workbench height: 3' | Min A-frame Height: 3'1'' | Min Extension Height: 7' | Storage Depth: 8" | Storage height: 3'7" | Width at base: 24" | Weight: 25 lbs.
  • The Velocity also includes several innovative new features such as the dual-pin hinge and the easy-to-use rock, locks for quick adjustment.
  • The Velocity can be used in many unique configurations as an a-frame, extension, staircase and 90-Degree ladder, and with Velocity trestle brackets (sold separately) to form a trestle-and-plank scaffolding system.
  • The Velocity's wide-flared legs and aerospace-grade aluminum construction provide an unmatched feeling of safety and stability.
Check Stock