Top Shore C Scale Reviews

Duramic 3D Printing Filament 1.75mm Bundle, Premium PLA Plus Filament Black, TPU Flexible Filament 95A Black, Dimensional Accuracy +/- 0.05 mm

  • ... tougher and incredibly easy to print, but at the same price level as basic PLA from other brand. Recommended Nozzle Temp: 220±10C..
  • High Elasticity & Strength - Duramic TPU filament 1.75mm features not only the high elasticity to stretch 3 times more than its original length, but also high strength resistance with shore hardness of 95A. Duramic TPU is a perfect choice if you want to print rubber-like flexible and resistant models, parts, jigs and tools, etc..
  • ACCURATE&CONSISTENT DIAMETER - Duramic uses digital caliper system which measures the diameter 5000 times/s and adjusts them automatically, with tolerance 100% ±0.05mm, 99.9% ±0.04mm, 99% ±0.03mm and 97% ±0.02mm..
  • USER-FRIENDLY & COMPATIBLE - Universal compatibility with diverse FDM 3D printers in market. User-friendly with length scale and weight scale to monitor remaining length and weight easily. The storage hole is designed to place the end of the filament to prevent tangling..
Check Stock

Silver Epoxy, Electrically Conductive Adhesive, Heat Resistant, AA-Duct 904, 2.5gm Syringe

  • Viscosity 200,000 Cp, Shelf Life 4 months At 25 °C 6 months refrigerated.
  • Mechanical Properties Hardness, Shore D 83, Appearance Silver.
  • Operating Temperature Up to 325 °C, Cure Type Heat cure.
  • Cure Time 30 minutes At 175 °C, 1 hour At 150 °C, 2 hours At 125 °C.
Check Stock

Nickel Adhesive Electrically Conductive Epoxy 1 Part Heat Cure AA-Bond N02 2.5gm Syringe

  • Viscosity at 25 °C cps Soft Paste, Specific Gravity, mixed 3.2.
  • Mechanical Properties Hardness, Shore D 88, Reactive solids contents, % 100 Pot Life 30 minutes.
  • Volume Resistivity ohm-cm less than 0.038.
  • Mixed Viscosity at 25°C, cps Soft Paste.
  • Operating Temperature -55 to 175 °C, Cure time 2 hours @ 125°C 1 hour @ 150°C 30 minutes @ 175°C.
Check Stock

Silver Epoxy Electrically Conductive Adhesive Bonding Heat Cure 1 Part AA-Duct 2979 5gm Syringe

  • Viscosity At 25 °C cps 350,000, Shelf Life 4 months At 25 °C, 6 months refrigerated.
  • Mechanical Properties Hardness, Shore D 84 Adhesive.
  • Volume Resistivity ohm-cm 3 x 10-4, Appearance Silver, Cure Type Heat cure.
  • cure time 15 min At 150 °C, or 1 hour At 125 °C.
Check Stock

Silver Adhesive Electrically Conductive Epoxy Bonding Heat Cure 1 Part AA-Duct 2979, 2.5gm Syringe

  • Viscosity At 25 °C cps 350,000, Shelf Life 4 months At 25 °C, 6 months refrigerated.
  • Mechanical Properties Hardness, Shore D 84 Adhesive.
  • Volume Resistivity ohm-cm 3 x 10-4, Appearance Silver, Cure Type Heat cure.
  • cure time 15 min At 150 °C, or 1 hour At 125 °C.
Check Stock

Epoxy Adhesive Optically Clear High Impact,Two Part Low Viscosity AA-Bond F113 5gm Pouch

  • Spec. Gravity 1.23 g/cc Mixed Viscosity 175 cP At 25°C, Thixotropic Index 1.0.
  • Mechanical Properties Hardness, Shore D 86, Pot Life 1.5 hours, Refractive Index 1.51.
  • Glass Transition Temp (Tg), ultimate 102°C.
  • cure time 24 hrs At 25°C, 1-2 hrs At 65°C.
Check Stock

Electrically Conductive Adhesive, Silver Filled Epoxy, Long Pot Life AA-Duct 902LP, 5gm kit

  • Spec. Gravity 2.79 g/cc Mixed Viscosity Paste At 25°C Reactive solids contents, % 100,Pot Life 3 hrs.
  • Volume Resistivity 003e 0.0001,Shrinkage linear in/in 0.003 Lap shear strength, psi 9600.
  • Operating Temperature --50 to +170 °C,Appearance Silver.
  • Cure Time 2 minutes At 120°C,5 minutes At 100°C,12 hours At 25°C.
Check Stock

Electrically Conductive Epoxy, Carbon Filled Adhesive, Room Temperature Cure, AA-CARB 61, 10gm kit

  • Spec. Gravity 1.35 g/cc Compressive Strength, psi 13,000 Pot Life 30 minutes Appearance Black.
  • Mechanical Properties Hardness, Shore D 85.
  • Vol Resistivity ohm. cm 003c 40 Operating Temp -50 to 145 °C Mix Ratio/weight 100:10 / Resin:Hardener.
  • Cure Time 24hrs At 25°C, 1 hr At 60°C , 15 minutes At 100°C.
Check Stock

Silver Epoxy, Electrically Conductive Adhesive, Highly Flexible Non-Bleeding AA-Duct 2919, 2.5gm kit

  • Spec. Gravity 2.32 g/cc Mixed Viscosity 995000 cP at temp 25.0 °C.
  • Mechanical Properties Hardness, Shore D 80 Adhesive Bond Strength 90 psi Lap shear 2 hrs At 65°C.
  • Electrical Properties Volume Resistivity 0.00011 ohm-cm,Dielectric Constant 4.8 At Frequency 1000 Hz.
  • Cure time 4 hrs At 65°C, 24.0 hour At 25°C.
Check Stock

Nickel Epoxy, Electrically Conductive Adhesive, Room Temp Cure, Air Dry, AA-DUCT 903, 50gm kit

  • Spec. Gravity 2.79 g/cc Cured Viscosity Paste, Solids contents % 100 Pot Life 30 minutes.
  • Mechanical Properties Hardness, Shore D 83, Shrinkage linear in/in 0.003.
  • Lap shear strength, psi 9400, Volume Resistivity ohm cm less than 0.038.
  • cure time 15 minutes At 100°C, 45 minutes At 50°C, 24 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener, Operating Temperature -60 to 150 °C.
Check Stock

Nickel Epoxy, Electrically Conductive Adhesive, Room Temp Cure, Air Dry, AA-DUCT 903, 2.5gm kit

  • Spec. Gravity 2.79 g/cc Cured Viscosity Paste, Solids contents % 100 Pot Life 30 minutes.
  • Mechanical Properties Hardness, Shore D 83, Shrinkage linear in/in 0.003.
  • Lap shear strength, psi 9400, Volume Resistivity ohm cm less than 0.038.
  • cure time 15 minutes At 100°C, 45 minutes At 50°C, 24 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener, Operating Temperature -60 to 150 °C.
Check Stock

Low Cost, 1 Part Heat Dry Electrically Conductive, Silver Epoxy Adhesive AA-DUCT AD1, 2.5gm Syringe

  • Mixed Viscosity 6800 cP, Density gm/cc 2.35, Silver percentage 65-75.
  • Mechanical Properties Hardness, Shore D 83, Pot Life 6 months At 25 °C 9 months refrigerated.
  • Sheet Resistivity 10-12 m?/sq, Lap shear strength 2000 Lb/in2.
  • Cure Time 0.7 hours At 200 °C, 1.5 hours At 180 °C, 2.5 hours At 160 °C.
Check Stock

Electrically Conductive Epoxy, Silver Adhesive, Room Temperature Cure, Air Dry AA-Duct 907, 5 gm kit

  • Spec. Gravity 2.79 g/cc Cured, Viscosity Paste ot Life 30 min solids contents, % 100.
  • Mechanical Properties Hardness, Shore D 83 Adhesive.
  • Shrinkage linear in/in 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002.
  • cure time 2 minutes AT 120°C,5 minutes At 100°C,12 hours At 25°C.
  • Mix Ratio, parts by weight 100/100 Resin/Hardener.
Check Stock