Top Shaft Key Reviews

Cocowin PVC Pipe Reamer, PVC Fitting Saver, PVC Socket Saver with 1-½-Inch and 2 Inch Head Aluminum for Water Lines, Drain Lines, Vent Lines

  • Warm tips: CN,US,EU Patent Pending. Check if the hex key shaft is locked or not before use.
  • It is recommended to use a variable-speed electric drill with low-speed cutting.
  • Appropriately add water for cooling to prevent the pipeline from melting at high temperature..
  • Apllication: Come with 1.5inches & 2inches guide disks that are suitable for Schedule 40 PVC Pipe(Note: this will NOT work on schedule 80 pipe), CPVC and ABS Ventilation Pipe, Drain Pipe, Water Pipe..
  • High quality: Fabricated aluminum alloy body with hex-shaped, stainless steel hex key shaft..
  • Square carbide insert: Carbide insert provides the cutting surface, you can be turned 90 degrees for new cutting surface before use..
  • Compatibility: The 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills..
Check Stock

ATP Bush Bearing and Seal Driver Set 52pc

  • Substantial:Suitable for mounting of bearings, bushings, sealing rings, and rubber (even for use with hydraulic presses).
  • Multile:8-65mm & 74mm Metric Discs, Shaft, Allen Key, Screw can remove or install bushings that are flush with the housing and allows you to build....
  • Contents: Package includes (48) discs from 18mm to 65 (1mm graduation) + (1) 74mm disc + (1) grip handle/shaft + (1) 3mm Allen key + (1) screw + (1)....
Check Stock

Flex Shaft 6mm Shank,Metal Flexible Shaft for Wood Carving Knife Chise Grinder Tool with Hex Wrench,100mm/3.93 Inch(Length)

  • FOREDOM FLEXSHAFT SET MOTOR MAINTENANCE KIT S-93 INNER SHAFT & S-77 OUTER SHEATH.
  • FOREDOM FLEX SHAFT MOTOR PARTS INNER SHAFT & OUTER SHEATH FOREDOM "Original" PARTS - SET OF REPLACEMENT PARTS These are original Foredom Flex Shaft replacement parts, used for the maintenance of your Flex Shaft Motor. Sale is for the set inner and outer replacement parts. The Outer Sheath measures 36-1/4" long, standard material outer sheath comes equipped on most of the standard models. FOREDOM Item Number: S-77 NOVELTOOLS # 0616-77 The Inner Shaft Cable the standard KEY TIP SHAFT, a 39" long inner shaft is used to replace broken or worn shafts. FOREDOM Part Number S-93 NOVELTOOLS # 0616-93 NOTE: Shaft should be greased when replacing part. Please see our store for 1oz Tube of Grease..
Check Stock

LucaSng Engine 212CC Centrifugal Clutch 3/4" Bore 12 Tooth+35 Chain Up to 6.5 HP Go Kart For Go Karts Mini Bike Replace Parts

  • 3/4" Shaft and 3/16" Key way Shaft Bore,:#35 Chain Accommodates,12 Tooth.
  • 2 - 6.5HP engines for Honda GC160, GC190, GX120, GX140, GX160, GX200.
  • Fits Engine 2 - 6.5HP with 3/4" Shaft and 3/16" Key way..
  • A high quality and professional clutch,Centrifugal clutch 3/4" bore 12 tooth design..
  • High impact,wear resistant that is super durable,Commonly used on go karts, mini bikes,Replace the old broken clutch,User-friendly controls for easy starting and operation.
Check Stock

PVC Pipe Reamer with 1-½-Inch Head Aluminum, PVC Fitting Saver, PVC Socket Saver with 0.315″ Hex Shaft, For Water Lines, Drain Lines, Vent Lines

  • Robust Build Quality: This PVC fitting saver built with premium quality aluminum alloy body with stainless steel hex key shaft, durability and high hardness..
  • Feature: Whether you are a professional or not, Gohelper PVC reamer is excellent for you. It is works great for Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, water pipe, but it does NOT work on schedule 80 pipe..
  • Compatibility: PVC fitting saver come with 0.315″ hex key shaft design can be compatible with standard drills, cordless drills, or impact drills. It is very suitable for family and temporary work..
  • Durable and Versatile: Square carbide insert provides four cutting surface, you can be turned 90 degrees for new cutting surface before use, the cutting efficiency is higher and faster..
  • Note: It is recommended to use a variable-speed electric drill with low-speed cutting.
  • Appropriately add water for cooling to prevent the pipeline from melting at high temperature,Check if the hex key shaft is locked or not before use. Warm tips: CN,US,EU Patent Pending..
Check Stock

Martin SH 1 Quick Disconnect Bushing, Sintered Steel, Inch, 1\ Bore, 1.871\ OD, 1.31\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin JA 1 Quick Disconnect Bushing, Sintered Steel, Inch, 1\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SDS 2 Quick Disconnect Bushing, Ductile Iron, Inch, 2\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin JA 7/16 Quick Disconnect Bushing, Sintered Steel, Inch, 0.43\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 7/8 Quick Disconnect Bushing, Sintered Steel, Inch, 0.87\ Bore, 2.812\ OD, 1.93\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

PVC Fitting Saver with 1-½-Inch and 2 Inch Head Aluminum, PVC Pipe Reamer, PVC Socket Saver with 0.315" Hex Shaft, For Water Lines, Drain Lines, Vent Lines

  • Feature: Whether you are a professional or not, Gohelper PVC reamer is excellent for you. It works great on Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, water pipe, but it does NOT work on schedule 80 pipe..
  • Robust Build Quality: This PVC fitting saver built with premium quality aluminum alloy body with stainless steel hex key shaft, durability and high hardness..
  • Durable and Versatile: Square carbide insert provides four cutting surface, you can be turned 90 degrees for new cutting surface before use, the cutting efficiency is higher and faster..
  • Compatibility: PVC fitting saver come with 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills. It is very suitable for family and temporary work..
  • Note: It is recommended to use a variable-speed electric drill with low-speed cutting.
  • Appropriately add water for cooling to prevent the pipeline from melting at high temperature,Check if the hex key shaft is locked or not before use. Warm tips: CN,US,EU Patent Pending..
Check Stock

150 Genuine Whiskey Barrel Bungs

  • The best replacement hollow barrel skeleton key for vintage and modern furniture..
  • This key fits for locks used on grandfather clocks, china cabinets, dresser drawers, cupboards, curios, desks, etc..
  • Overall Length: 2 3/8"     Shaft Length: 1 1/2"     Bit: 1/4" Wide x 1/4" Tall     Inner Barrel Diameter: 3/16"      Sizes are....
  • The key is made of die cast zinc with antique copper plate..
Check Stock

Martin SDS 1 1/8 Quick Disconnect Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock