Top Sff Optical Transceiver Module Reviews

1G SFP SX for Cisco LC-SX-MMD GLC-SX-MM SFP-GE-S Ubiquiti unifi UF-MM-1G Netgear AGM731F D-Link DEM-311GT ZTE SFP-GE-M500 Extreme MGBIC-LC01 1000BASE-SX SFP 850nm 550m DOM Transceiver Module…

  • 【1000BASE-SX】SFP to LC Optical Gigabit Ethernet transceiver module 1.25Gbps SFP Mini -GBIC, Multi-mode 850nm LC duplex connector DDM 550m..
  • 【1GB SFP】For Cisco 1.25 Gigabit Ethernet 1000BASE-SX standards (coding as Cisco LC-SX-MMD GLC-SX-MM SFP-GE-S ).
  • 【1G SFP Module】SFP Transceivers Compatible Cicso meraki with Gigabit Ethrnet , up to 550m for MMF transmission, compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions ,specified in IEEESFF-8472 MSA Compliant, IEEE 802.3ah-2004.
  • 【 Easy to Use 】installation, plug and play, fully hot-pluggable. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with SFP ports..
  • 【3 WARRANTY】30-Days Free-returned, 65-Days Free-replacement, 5-Years Free-maintenance,Fibermall supports regular custom service for your options..
Check Stock

Logitech USB Unifying Receiver - 2 Pack

  • Applications: This device can be wildly used to wireless remote control,wireless audio,somatosensory devices, RFID, NFC, smart grid, smart home, etc..
  • NRF24L01 Wireless Transceiver Module with 125 Communications channels, multi-point communication and frequency hopping to meet the communication....
  • NRF24L01 wireless transceiver module built-in 2.4GHz antenna, small size, 15x29mm (including antenna).
  • it can be directly connected to a variety of....
  • The operating voltage of the wireless module is generally 3.3v, while the ordinary 51 microcontroller is 5v. This module is convenient to shop....
  • NRF24L01 Socket Breakout Adapter with NRF24L01 Wireless Transceiver Module.
Check Stock

SFP+10GBASE-T Transceiver Copper RJ45 10Gbe SFP Module Compatible for Cisco SFP-10G-T-S, Meraki MA-SFP-10G-T, MikroTik, Unifi, Netgear, QNAP, Supermicro, Cat6a/ Cat7, 30m

  • [Wide Compatibility] Compatible for Cisco SFP-10G-T-S (NOT support on Cisco Nexus Series and Cisco Meraki Series), Netgear AXM765, D-L ink DEM-440XT, Mikrotik, Supermicro, and Other Open Switches..
  • [Easy to Use] Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports..
  • [High Quality] All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch..
  • [After-sales Service] 30-day free return, 3-year warranty, lifetime technology support. QSFPTEK is a manufacturer of transceiver. We offer many compatible options. If you are not sure about the compatibility of your device, please feel free to contact us..
Check Stock

CreativeKIT GLC-SX-MM,1.25G SFP 1000Base-SX, 850nm MMF, 550m DDM Transceiver for Cisco Meraki Ubiquiti and Other Open Switches

  • Overview--1.25 Gb/s 1000Base-SX Ethernet, 850-nm, Duplex LC connector, up to 550 meters. Temperature Range--0 to 70°C，Output Power: -8.2~-1dBm，Receiver Sensivity: -11.5dBm，Interface: LC.
  • Compatible Type: GLC-SX-MM ,GLC-SX-MMD/GLCSX-MM/SFP-GE-S, Meraki MA-SFP-1GB-SX, Ubiquiti UF-MM-1G, Mikrotik S-85DLC05D.
  • Stable Transmission -- This 1000BASE-SX SFP supports 550m stable link lengths over Dual LC OM3 multi-mode (MMF) fiber. Each SFP transceiver module is individually tested to be used on 1G switches, routers, servers, NICs, media converter and other transmission equipment that support SFP modules..
  • Wide Compatibility -- for Cisco, Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, TP-Link, Broadcom, Linksys and Other Open Switches..
  • You will get: 1 PCS 1.25G multimode optical module + 1 PCS OM3 3-meters multimode dual fiber optical fiber (The fiber is easy to break, please do not bend).
Check Stock

2Pcs NRF24L01+PA+LNA RF Wireless Transceiver Module with SMA Antenna 2.4G 1100m & Wireless Module with Breakout Adapter On-Board 3.3V Regulator

  • NRF24L01+PA+LNA Wireless Transceiver Module is a 2.4GHz ISM band transceiver, compatible with Raspberry Pi. Auto-acknowledge and auto-retransmit abilities.
  • Support up to six channels of data reception.
  • the transceiver come with power amplifier and SMA antenna, which make the effective communication distance has been greatly expanded..
  • A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps)..
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • Applications:It can be wildly used in wireless remote control such as RC planes/vehicles, wireless audio, wireless voice transmission such as VoIP, wireless networks, smart home,somatosensory devices, RFID, NFC etc..
  • Package Included:2 x NRF24L01+PA+LNA Wireless Transceiver Module+2 x SMA Antenna+2 x NRF24L01+ Breakout Adapter.
Check Stock

A-Tech 4GB RAM Stick for Dell OptiPlex 9010, 7010, 3010, 990, 980, 790, 390, DT/MT/SFF/USFF - DDR3 1333MHz PC3-10600 Non-ECC DIMM Memory Module

  • Compatible with Intel 1st Gen i3/i5/i7/Pentium, 2nd Gen i3/i5/i7/Pentium/Celeron, & 3rd Gen i3/i5/i7 CPU Processors *Intel 2nd Gen Pentium G600 series & Intel 2nd Gen Celeron processors will run memory at 1066MHz*.
  • Designed for Dell OptiPlex Models: 9010 (MT/DT/SFF/USFF), 7010 (MT/DT/SFF/USFF), 3010 (DT/MT/SFF), 990 (MT/DT/SFF/USFF), 980 (MT/DT/SFF), 790 (MT/DT/SFF/USFF), 390 (MT/DT/SFF) – MT (Minitower), DT (Desktop), SFF (Small Form Factor), USFF (Ultra Small Form Factor).
  • 2Rx8 1.5V 240-pin Non-ECC Unbuffered DIMM (Non-ECC UDIMM).
  • 4GB (1 Stick of 4GB) DDR3 1333MHz PC3-10600 RAM Memory Module.
  • Genuine A-Tech Brand – Lifetime Warranty – Toll Free Technical Support.
Check Stock

UMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino

  • It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
  • 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
  • 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.
Check Stock

A-Tech 8GB RAM Stick for Dell OptiPlex 9010, 7010, 3010, 990, 790, 390, DT/MT/SFF/USFF - DDR3 1333MHz PC3-10600 Non-ECC DIMM Memory Module

  • Genuine A-Tech Brand – Lifetime Warranty – Toll Free Technical Support.
  • Compatible with Intel 2nd Gen i3/i5/i7, Pentium, Celeron, & 3rd Gen i3/i5/i7 CPU Processors *Intel 2nd Gen Pentium G600 series & Intel 2nd Gen Celeron processors will run memory at 1066MHz*.
  • Designed for Dell OptiPlex Models: 9010 (MT/DT/SFF/USFF), 7010 (MT/DT/SFF/USFF), 3010 (DT/MT/SFF), 990 (MT/DT/SFF/USFF), 790 (MT/DT/SFF/USFF), 390 (MT/DT/SFF) – MT (Minitower), DT (Desktop), SFF (Small Form Factor), USFF (Ultra Small Form Factor).
  • 8GB (1 Stick of 8GB) DDR3 1333MHz PC3-10600 RAM Memory Module.
  • 2Rx8 1.5V 240-pin Non-ECC Unbuffered DIMM (Non-ECC UDIMM).
Check Stock

A-Tech 4GB RAM Stick for Dell OptiPlex 9020, 9010, 7020, 7010, 3020, 3010, MT/DT/SFF/USFF - DDR3 1600MHz PC3-12800 Non-ECC DIMM Memory Upgrade Module

  • Designed for Dell OptiPlex Models: 9020 (MT/SFF/USFF), 9010 (MT/DT/SFF/USFF), 7020 (MT/SFF), 7010 (MT/DT/SFF/USFF), 3020 (MT/SFF), 3010 (MT/DT/SFF) – (Minitower, Desktop, Small Form Factor, Ultra Small Form Factor) *NOT for micro or AIO (All-in-One) models*.
  • Compatible with Intel 2nd Gen i3/i5/i7/Pentium, 3rd Gen i3/i5/i7 & 4th Gen i3/i5/i7/Pentium CPU Processors *Intel 2nd Gen CPU Processors will run memory at 1333MHz*.
  • Genuine A-Tech Brand – Lifetime Warranty – Toll Free Technical Support.
  • 4GB (1 Stick of 4GB) DDR3 1600MHz PC3-12800 RAM Memory Module.
  • 1Rx8 1.5V 240-pin Non-ECC Unbuffered DIMM (Non-ECC UDIMM).
Check Stock

A-Tech 2GB (2X 1GB) Memory RAM Kit for Dell OptiPlex 960, 760, 755, 745, 740, 360, 330, 160, (MT, DT, SFF, USFF) - DDR2 800MHz PC2-6400 Non-ECC DIMM Modules

  • 2GB (2 x 1GB) DDR2 800MHz PC2-6400 RAM Memory Module.
  • 240-pin Non-ECC Unbuffered DIMM (Non-ECC UDIMM).
  • Designed for Dell OptiPlex Models: OptiPlex 960 (DT, MT, SFF) - OptiPlex 760 (MT, DT, SFF, USFF) - OptiPlex 755 (MT, DT, SFF, USFF) - OptiPlex 745 (MT, DT, SFF, USFF) - OptiPlex 740 (MT, DT, SFF) - OptiPlex 360 (MT, DT) - OptiPlex 330 (MT, DT) - OptiPlex 160 (Tiny Desktop).
  • Genuine A-Tech Brand - Lifetime Warranty - Toll Free Technical Support.
Check Stock

4 Pack 1.25G 850nm Multimode SFP LC Transceiver Fiber Module 550 Meters 1000Base-SX LC MMF for Cisco GLC-SX-MMD/SX-MM/SFP-GE-S,Fortinet,Ubiquiti UniFi UF-MM-1G,Mikrotik S-85DLC05D Meraki MA-SFP-1GB-SX

  • with Advanced DDM Function to monitor real-time parameter and state on fiber links. SFP MSA Compliant, IEEE 802.3z compliant..
  • Plug and Play & Durable: Hot-swappable, Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function..
  • Low Power Consumption: The power consumption is only less than 1watt, that can save costs wisely. GESD will always provides innovative and cost-effective optical networking solutions. Each sfp module is individually done test before packing..
  • Widely Used in fiber switches, routers, NIC, server or other fiber optic equipments with 1Gb SFP ports.★ Compatible with MSA compliant equipment Cisco Meraki,Ubiquiti,D-Link, Supermicro,TP-Link,Broadcom,Linksys and Huawei,Mikrotik,Netgear,Supermicro Other Open Switches..
  • If you are not sure about the compatibility of your device, please feel free to contact us for customized SKU to meet your needs(We offer many compatible options). ★After-sales Service:30-day free return,3-year warranty,lifetime technology support.We produce high quality transceivers,every transceiver....
Check Stock

10G SFP+ RJ45 Copper Transceiver 10GBase-T RJ-45 SFP+ Module Compatible for Cisco SFP-10G-T-S Ubiquiti UniFi UF-RJ45-10G Mikrotik Fortinet Netgear D-Link Supermicro TP-Link CAT.6a/CAT7 30m

  • Widely compatible for Cisco SFP-10G-T-S, Ubiquiti UF-RJ45-10G, Mikrotik, Fortinet, Netgear, D-Link, Supermicro, TP-Link, Broadcom and other open....
  • Supports Links up to 30m using Cat.6a/7 Cable..
  • SFF-8431 and SFF-8432 MSA Compliant, IEEE 802.3az Compliant.
  • Each transceiver is individually tested on switch to make sure 100% compatible before delivery.
  • 3-year Warranty, 30 Days Free-returned, Free Lifelong Technical Support..
Check Stock

A-Tech 2GB 2X 1GB Memory RAM Kit for Dell OptiPlex 755 745 740 GX620 GX520 360 330 160 FX160 MT DT SFF USFF - DDR2 667MHz PC2-5300 Non-ECC DIMM Modules

  • 2GB (2 x 1GB) DDR2 667MHz PC2-5300 RAM Memory Module.
  • 240-pin Non-ECC Unbuffered DIMM (Non-ECC UDIMM).
  • Designed for Dell OptiPlex Models: OptiPlex 755 (MT, DT, SFF, USFF) - OptiPlex 745 (MT, DT, SFF, USFF) - OptiPlex 740 (MT, DT, SFF) - OptiPlex GX620....
  • Genuine A-Tech Brand - Lifetime Warranty - Toll Free Technical Support.
Check Stock