Top Servo System Reviews

FEETECH 35KG Servo Motors FT5330M High Torque RC Servo Full Metal Gear Digital Servo,Aluminium Case, Control Angle 180° for Scx24,1/8 1/10 RC Cars,TRAXXS x4, Baja, RC4WD, GTR and More

  • BRAND SERVO-FEETECH 35KG digital rc servo, high sensitivity, stable and low-noise. High quality PA aluminum case, more sturdy. Hard iron shaft, provide higher stability..
  • EXCELLENT SERVO PERFORMANCE-High precise upgrade metal gear, with better accuracy and longer service life.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • UPGRAD SERVO-Upgraded high torque rc servo, high rotation – well-controlled 180° (at 500→2500μsec) large steering angle, when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable. React quickly and accurately. No stuck problem..
  • MATCHING SERVO ACCESSORIES-This mini micro servo is equipped with metal mount and servo horn, replaces the original plastic accessories. No need to order accessories with more trouble..
  • WIDE-APPLICATION-Perfect for Axial scx24, 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system. The servo size is 55X20x43mm..
Check Stock

10 pcs 50cm 3-Pin Servo Extension Cords Cable Lead Male to Female Plug with 19.7inch Wire for RC Futaba JR Servo Connection Parts

  • 3-Pin Servo extension cords cable lead male to female plug..
  • Line length: About 50cm / 19.7inch；Packing quantity:10pcs..
  • This comes in very handy when your servo is further away from the controller than the wire on the servo allows..
  • Male connector on one end goes to controller, female connector mates with servo, allowing it to work in either system or as an adapter between systems..
  • Practical Range: Airplane, Helicopter, Quad Copter / Multi-Copter RC Cars, For Servo Connection or Receiver Connection..
Check Stock

Metal Servo Stand Mount, RCPLAGA RC Servo Stand Mount Part for 1/10 RC Crawler Car AXial SCX10 II 90046 90047 Axle Upgrade Parts (Black)

  • 【FIT FOR】: RC Servo Stand Mount Part are suitable for 1/10 SCX10 II 90046 90047 RC crawler car. It is a good choice to upgrade your RC car..
  • 【PREMIUM MATERIAL】: The Metal Servo Stand Mount Part is made of high-quality metal, which has strong wear resistance, corrosion resistance, no rust, and durability..
  • 【EASY TO USE】:The 1/10 Metal Servo Stand Mount is attached with screws, which is easy to install and helps to install the steering gear on the front axle..
  • 【Exquisite ACCESSORIES】: Exquisite craftsmanship and excellent quality, increase rigidity, prevent deformation, and help extend the service life of the servo system..
  • 【PACKAGE LIST】 :1 x upgrade metal servo stand mount,1 x Bag of Screw.
Check Stock

Dorhea 5 Pcs SG90 Micro Servo Motor Mini Servo SG90 9g Servo Kit Compatible with RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • Mini servo SG90 is tiny and lightweight with high output power..
  • SG90 servo motor compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9g servo support Arduino,Futaba, JR, Sanwa and Hitec remote system..
Check Stock

Liyeehao 1/10 Servo Stand Mount, RC Servo Stand Mount, Assemble Wear Resistance RC Accessory for RC Car Easy to Install Replacement

  • The servo stand mount can be firmly assembled together without any other attachment, very easy to install and does not take much time..
  • Superb craftsmanship and superior quality enable to increase rigidity and prevent distortion, help extend the service time of servo system..
  • Servo stand mount with steering link rod, fit for AXIAL SCX10 II 90046 1/10 RC car..
  • Servo stand mount is made of high quality aluminum alloy material, steering link rod is mainly made of high quality metal, strong wear resistance, corrosion resistance, no rust and durability..
  • Wonderful replacement for the old or broken one, directly fitment..
Check Stock

ALAMSCN 5PCS SG90 9g Servo Motor + 16 Channel PWM Servo Motor Driver PCA9685 IIC Module 12-Bit DIY Kit for RC Robot Arm Helicopter Airplane Car Boat Remote Control for Arduino for Raspberry pi

  • These SG90 9G micro servo motors have a completely new redesigned PCB and control system to provide more accuracy..
  • Its internal gearing and motor are also upgraded to improve dead bandwidth and centering..
  • For SG90 9G micro servo motor is far more accurate and safe to use in aircraft which require precise servo movements and perfect centering..
  • Apply to remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on Arduino ,Raspberry Pi..
  • Package includes: 5PCS SG90 9g Micro Servo + 1PC PWM Servo Motor Driver. Cost-effective kit to meet your DIY needs..
Check Stock

US STOCK M3-M16 Drilling Tapping Machine Tap Collets 1100mm Electric Tapper Machine Threading Machine

  • Tapping angle: Universal.Rotation Speed: 0-312r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Standard Accessories Tapping Arm (One Set) Servo Motor And Reducer ( One Set).Tap Holder M3-M16 (One Set) Universal Joint(Tapping For a Vertical/Horizontal ) Optional Accessories：Magnetic Base 300KG (Tapping An Arbitrary Range) Moving Workbench (Mobile Tapping Machine ).
  • Applicable Materials: Aluminum, Copper, A3 steel, 45 steel, Cast Iron, Pig Iron, Q235, S136, mold steel, 718H, 40Cr, Stainless Steel and other metal materials.
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Main Parts(No console):Import Servo Motor+Enhanced Reducer + Touch Screen Control System+High-precision Cantilever Bracket+Import Tap Collet(Standard)+Universal Joint(Tapping for a Vertical/Horizontal).
Check Stock

DIYmall RC Servo Tester 3CH Digital Multi Servo Tester ECS RC Consistency CCMP Master Speed Controller Checker

  • CCPM Servo Consistency Master/Servo tester, 2PCS:https://www(dot)amazon(dot)com/dp/B095HDN2T6?ref=myi_title_dp.
  • The device also can be used as a signal generator for electric speed controller (ESC).
  • With it, you can test your motor system without using a transmitter and receiver.
  • There are 3 modes to check servos or ESC,the ability to easily detect and configure the server's virtual spaces, jitter and median. It can connect 3 servos of the CCPM helicopters and select servos.
  • What you will get is: 1 X Servo tester. Any question, pls feel free to contact us.
Check Stock

G.T. Power Servo Tester Multi 3CH ECS Consistency Speed Controler Checker CCPM Master for RC Helicopter Car Boat

  • ★ Aluminum shell, durable and lightweight, easy to operate buttons. A new upgraded servo tester..
  • ★ 3 modes to check servos or ESC, manual mode, neutral mode, automatic “window wiper” mode, you can manage the servo tester as your need..
  • ★ You can also connect 1-3 ESC to test and compare their reaction time respectively..
  • ★ GT Power Servo Tester can connect 3 servos of the CCPM helicopters, adjust the helicopters and select servos, multi-function..
  • ★ The device also can be used as a signal generator for electric speed controller (ESC). With it, you can test your motor system without using a transmitter and receiver..
Check Stock

Barnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder

  • [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
  • [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
  • [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
  • [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
  • [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check Stock

Rampage Xt 1/5 Scale Gas Truck (Blue)

  • Powerful 2-stroke gas engine, Pull start, Large capacity fuel tank, Tuned Exhaust pipe, 4mm 6061 T6 Aluminum chassis, Aluminum body oil filled shocks, Front and rear gear differentials, Ball bearings throughout..
  • Easily tuned gas engine w/ choke, Tunable centrifugal clutch, Adjustable brake linkage, Adjustable ride height, Tunable suspension, Multiple shock locations, Adjustable toe angle, Adjustable camber..
  • Aggressive monster truck tires, Shaft driven durability, Enclosed battery box, Chrome tuned pipe, Engine enclosed in roll cage..
  • Powerful 30cc HY 2-Stroke Gas Engine, High torque throttle/brake servo, High torque 1/5 scale steering servo, 2.4GHz radio system..
Check Stock

Traxxas 90076-4-GRN Hoss 4X4 VXL: 1/10 Scale Monster Truck

  • Traxxas 90076-4 - Hoss VXL Brushless 1/10 4X4 Monster Truck RTR, Green.
  • Features: VXL-3s Waterproof ESC Velineon 540XL Brushless Motor Up to 60+ mph w/ 3S LiPo battery TSM Reinforced Bumpers Modular Chassis TQi 2.4GHz High Output Radio System Clipless ProGraphix Body 2.8” Black Chrome Wheels 5.3” Sledgehammer Tires Sealed Ball Bearings Hex hardware with Rust-Resistant Black Oxide Coating Dual bellcrank design with integrated servo saver Adjustable 4mm steel toe and camber links.
  • Includes: (1) RTR Hoss 4X4 VXL with Velineon VXL-3s ESC and 540XL Brushless Motor (1) TQi 2.4GHz Radio System High Quality Maintenance Tools Quick Start Guide.
  • Specs: Length: 20.24" Width: 13.10" Ground Clearance: 2.75" Height: 8.34" Wheelbase: 11.62" Front Shock Length: Long Rear Shock Length: XX-Long Servo: Waterproof #2075 Top Speed (optional gearing): 60+ mph with 3-cell LiPo & 23/50 gearing.
  • Part number(s) included (in factory packaging): 90076-4.
Check Stock

Traxxas 58014-4 Slash 2WD Unassembled Kit 1/10-scale 2WD Short Course Truck

  • Traxxas 58014-4 - Slash XL-5 1/10 2WD Short Course Truck Unassembled Kit.
  • Features: Unassembled kit with electronics Includes XL-5 ESC, Titan 12-turn motor, servo, and TQ 2.4GHz radio system Clear, fully-trimmed Slash body....
  • Includes: (1) Slash 2WD Assembly Kit: 1/10-Scale 2WD Short Course Truck (1) Clear body (1) Transmitter (1) Receiver (1) Servo (1) ESC (1) Motor (1)....
  • Part number(s) included (in factory packaging): 58014-4.
Check Stock