Top Servo Feedback Board Reviews

15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles

  • You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
  • Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
  • Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
  • Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
  • Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.
Check Stock

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

  • Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
  • Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
  • 2.You should connect higher power supply for higher-power servo.
  • 3.Make sure servo are connected properly, otherwise they will not move..
  • Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
  • Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check Stock

Thrustmaster TX RW Leather Edition (XBOX Series X/S, XOne & PC)

  • Thrustmaster is offering, in a single, limited edition package, a set of incredibly precise racing controllers, favored by racers for their ability to deliver unrivalled immersion in the world of racing simulations for PC and for Xbox One, as the official license guarantees.
  • Hand-stitched leather wheel: Detachable / 11"/28 centimeter in diameter, hand-stitched leather.
  • TX SERVO BASE: Next-Gen 900° force feedback, Brushless servo motor, Dual-belt mechanism, H.E.A.R.T Technology.
  • T3PA 3-pedal pedal set: Fully adjustable, Conical Rubber Brake Mod included.
Check Stock

Robotic xArm 6DOF Full Metal Programmable Arm with Feedback of Servo Parameter Wireless/Wired Mouse Control Mobile Phone Programming

  • Robotic controller uses ARM core CPU, built-in Bluetooth,16M storage memory,single action group can hold 510 action. Better experience programming....
  • Support wireless handle and free Android/iOS APP.
  • Uses serial bus servo motor with feedback of angle, temperature and voltage, motor shaft lock protection, the LX-15D serial servo have extra long life.
  • Simple wiring design， plug and play Suction cup design.
Check Stock

DIYmall 10pcs 10cm 3.93inch Male to Male JR Plug Servo Extension Lead Wire Cable 3Pin 100mm for RC Plane

  • 10CM Male to Male JR Plug Servo Extension Lead Wire Cable.
  • Great for jumping from board to board or just about anything else..
  • There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers..
  • Length:100mm Type:JR Plug Servo Extension wire (Male to Male).
Check Stock

Thrustmaster Open Wheel Add On (PS5, PS4, XBOX Series X/S, One, PC)

  • Compact size (11 inches 28 cm in diameter) and lightweight design for enhanced feel of Force Feedback.
  • 2 responsive sequential paddle shifters, mounted on the wheel (100% metal, 3 inches 7.5 cm tall), 6 action buttons plus 1 D-pad plus 1 rotary selector switch (3 positions with push button).
  • Sturdy faceplate crafted of brushed black aluminum and Suede wheel grips.
  • Shape and hand positioning perfectly adapted for car racing competitions.
  • Compatible with a wide variety of platforms: PS4/Xbox One/PC (Windows 10, 8, 7) within the Thrustmaster ecosystem: T500 RS, T300 RS Servo Base, T300 RS, T300 GT Edition, T300 Ferrari GTE, T300 Ferrari Integral Racing Wheel Alcantara Edition, TX Racing Wheel Servo Base, TX Racing Wheel, TX Racing Wheel Leather Edition, TS-XW RACER, TS-PC RACER, T-GT (sold separately).
Check Stock

6Pcs ShareGoo JR Style Servo Splitter Cable, 2.75' Servo 1 Male to 2 Female JR Y Harness Y Cable Extension Wire for RC Models Car Airplane Helicopter Drone Boat

  • Used for RC cars trucks airplanes helicopters rc boat servo connection, receiver connection and flight control board..
  • This servo Y-cable allows you to control two servos with one radio channel..
  • Material: 22AWG silicone wire.Wire Length: 7CM/2.75".
  • 3Pin wire cable.Male JR plug to 2 Female JR plug Y Harness cable..
  • Pack of 6 JR style servo splitter cable,unique design, professional quality JR style connectors..
Check Stock

Arduino Uno 3 Ultimate Starter Kit Includes 12 Circuit Learning Guide

  • This is the ultimate Arduino Uno kit enough to get you started with hundreds of arduino projects.
  • Bread Board — Holder — Jumper Wires — USB Cable — LEDs — DC Motor — Small Servo — Relay.
  • Includes a total of over 190 electronic parts and components.
Check Stock

Arduino | Step by Step: The Ultimate Beginner’s Guide with Basics on Hardware, Software, Programming & DIY Projects (Arduino | Introduction and Projects Book 1)

  • ... Effective technical/customer support from USA with lifetime replacement guarantee on all parts – The Monster comes in 16" x 12" durable organizer tool box for safe transport and storage. No soldering required. Please let us know about any improvements we can make to the Monster Kit. Critical feedback is much appreciated.
Check Stock

LewanSoul xArm 1S Programming Desktop Robotic Arm with Powerful and Robust Intelligent Bus Servos Featuring Position and Voltage Feedback (Unassembled)

  • Intelligent bus servo: xArm 1S with position feedback, voltage feedback functions and high torque and convenient wiring. So that it can grab heavier object and has better performance..
  • Multiple control methods: xArm 1S supports wireless handle control, smart phone APP and mouse control..
  • Three Programming Methods: PC software/Smart phone APP/Offline manual action programming..
  • Powerful control System: with ARM core CPU, built-in 4.0 Bluetooth module and 16M storage memory, robotic arm can save 1020 actions for each action group!.
  • Quick Wiring: connect to the 7.5V 6A DC power supply directly without any voltage regulator module. The handle control receiver adopts USB design, which is easy to insert and greatly reduces the difficulty of wiring..
Check Stock

Lego Mindstorms Ev3 Large Servo Motor

  • The EV3 Large Servo Motor is a powerful motor that uses tacho feedback for precise control to within one degree of accuracy. By using the built-in rotation sensor, the intelligent motor can be made to align with other motors on the robot so that it can drive in a straight line at the same speed. It can also be used to give an accurate reading for experiments. The motor case design also makes it easy to assemble gear trains..
Check Stock

sb components Motor Driver Board for The BBC Micro bit 2 Channel DC Motors and 3 Channel Servos Motors Motor Driver for Micro bit BBC microbit Motor Driver Board

  • micro:bit edge connector, directly pluggable.
  • 2x DC motor interfaces, 3x servo interfaces.
  • Integrates 5V regulator, up to 3A output current.
  • Onboard multi connector options for DC motors in different specifications, onboard standard servo headers.
Check Stock

KEYESTUDIO 16-Channel 12-bit Servo Motor Driver Board I2C Interface for Arduino

  • This expansion board can directly stack on the controller R3 board and can drive up to 16 servos.
  • Uses I2C input, just occupy A4 and A5 interface on the control board.
  • Contains PCB double sided holes, can direct to solder with components to build up prototyping circuits.
  • Servo power supply independent V + input up to 6V.
  • How to use: Search for "keyestudio wiki KS0258" in Google Chrome to get the wiki online tutorial for this product..
Check Stock