Top Server Sata Cable Reviews

iecables SCSI Adapter CN50 Male to DM50 Female - Molded

  • [U.2 to PCIe Adapter] Extending an U.2 (SFF-8639) Interface on your desktop or server for 2.5" U.2 NVMe SSD, or you may need install an 2.5" SATA SSD to original SATA 3 Port sometime. This U.2 to PCIe 3.0 x4 Adapter meets both of your requirement.
  • [Bandwidth PCI-e 3.0 x4 ] Compatible with PCI Express 3.0 x4/x8/x16, ensure your 2.5" U.2 NVMe SSD runs in full performance. Backward Compatible with PCIe 2.0/1.0, the speed will be slower.
  • [Installation]1. When install 2.5" U.2 NVMe SSD, only PCI-e slot needed 2. When install 2.5" SATA SSD, SATA data cable needed to be connected.
  • [Please Note] 1. It can not be as a system disk if MOBO does not support NVME protocol, only as a storage disk 2. Please install WIN10 system.
  • It may need install driver if WIN7, and the speed may not be improved.
  • [Package including] 1x U.2 NVMe to PCI-e Adapter , 1x SATA3 Cable, Mounting Screws for SSD.
Check Stock

PCI Express SATA 3.0 Controller Card, 2-Port PCIe to SATA III 6GB / s Built-in Adapter Converter, PCI-E to SATA 3.0 Disk Array Card，with Small Bracket and 2 SATA Cable Support SSD and HDD

  • ➤ Compliant with Serial SATA version 3.0.
  • ➤ PCIe to SATA 3.0 2 Port Expansion Card with a low profile Bracket and 2 SATA Cable.
  • ➤ Connect 2 mass storage devices at the same time. Compatible with Windows XP/Server 2003/Vista/7/8(32/64 bit)/10/MAC/Linux OS.
  • ➤ Built in 2 SATA3.0 interfaces, Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0Gbps.
  • ➤ Support IDE or AHCI programming interface.
Check Stock

Intel Server System M50CYP1UR212

  • INTEL CORP. SR2612URRNA INTEL SERVER SR2612URR.
Check Stock

Argon ONE M.2 Aluminum Case for Raspberry Pi 4 with Power Button and Fan | SATA SSD Support | B-Key and B+M Key Compatible

  • Most powerful Raspberry Pi 4 case with M.2 SATA SSD Carrier Board, Power Button, Controllable Internal 30mm Fan & IR Sensor.
  • Integrated with M.2 SATA Expansion Kit for use with M.2 SATA SSD B-Key or B+M Key.
  • power and transfer via USB 3.0 Port. With safe shutdown power button & software controllable 30mm fan..
  • Keeps RPI 4 cooler with aluminium case enclosure and heatsink. GPIO access via removable magnetic cover..
  • Neat cable management. Easily connect power cable, two (2) full sized HDMI display ports, GPIO accessories and comes with built-in IR..
  • Maximize Pi4 potential as a single board computer by turning it into a tiny desktop, media player, retro console or server. Compatible with Raspberry Pi 4 Model B 1GB / 2GB / 4GB / 8GB..
Check Stock

ZimaBoard 832 Single Board Server Router X86 Single Board Computer Personal Cloud Network Attached Storage 4K Media Server Dual Gigabit Gateway - PCIe x4 SATA 6.0 Gb/s for HDD/SSD

  • World's First Hackable x86 Single Board Server - ZimaBoard is a low-cost single board server exclusively designed for makers, DIYers and geeks. Equipped with Intel Celeron N3450 Quad Core operating at 1.1GHz to 2.2GHz, it has both the expandability of an x86 single-board computer, and the appropriate power of a micro server, perfect for edge intelligence and smart home projects..
  • PCIe x4, SATA 6.0 Gb/s & Dual Gigabit Ethernet Onboard - Fully customizable and expandable with onboard interfaces, PCIe x4 interface caters to a variety of user needs. Also, with a large number of PCIe accessories available in the market, you can easily extend your ZimaBoard setup with 2.5Gbe, NVMe NGFF SSD, WIFI dongle, XMOS/DAC module, and many more!.
  • Personal NAS, 4K Streaming Server, VPN Router & IoT Gateway - With ZimaBoard, you can setup a 4 Terabyte personal cloud in 5 minutes and no more monthly bills, configure a secure VPN to protect your digital footprint, tune your network with OpenWrt and , build a 4K media server that runs with Plex, share and collaborate with team members on your files, or upgrade your smart projects across different systems..
  • Pre-installed CasaOS - A simple & elegant home cloud around Docker ecosystem, changing the way families view modern livi....
Check Stock

ZimaBoard 216 Single Board Server Router X86 Single Board Computer Personal Cloud Network Attached Storage 4K Media Server Dual Gigabit Gateway - PCIe x4 SATA 6.0 Gb/s for HDD/SSD

  • World's First Hackable x86 Single Board Server - ZimaBoard is a low-cost single board server exclusively designed for makers, DIYers and geeks. Equipped with Intel Celeron N3350 Quad Core operating at 1.1GHz to 2.4GHz, it has both the expandability of an x86 single-board computer (SBC), and the appropriate power of a micro server, perfect for edge intelligence and smart home projects..
  • PCIe x4, SATA 6.0 Gb/s & Dual Gigabit Ethernet Onboard - Fully customizable and expandable with onboard interfaces, PCIe x4 interface caters to a variety of user needs. Also, with a large number of PCIe accessories available in the market, you can easily extend your ZimaBoard setup with 2.5Gbe, NVMe NGFF SSD, WIFI dongle, XMOS/DAC module, and many more!.
  • Personal NAS, 4K Streaming Server, VPN pfSense Router & IoT Gateway - With ZimaBoard, you can setup a 4 Terabyte personal cloud in 5 minutes and no more monthly bills, configure a secure VPN to protect your digital footprint, tune your network with OpenWrt and pfSense, build a 4K media server that runs with Plex, share and collaborate with team members on your files, or upgrade your smart projects across different systems..
Check Stock

Samsung 850 EVO 4TB 2.5-Inch SATA III Internal SSD (MZ-75E4T0B/AM)

  • Optimized Performance for Everyday Computing. Interface: SATA 6Gb/s Interface, compatible with SATA 3Gb/s & SATA 1.5Gb/s interfaceGb/s..
  • Incredible Sequential Read/Write Performance : Up to 540MB/s and 520MB/s Respectively, and Random Read/Write IOPS Performance : Up to 98K and 90K Respectively.
  • Endurance, Reliability, Energy Efficiency, and a 5-Year Limited Warranty.
  • Included Contents: 2.5″ (7mm) SATA III (6GB/s) SSD & User Manual (All Other Cables, Screws, Brackets Not Included)..
  • Free download of Samsung Data Migration and Magician software available for easy installation and SSD management. Hardware Compatibility: Windows 8 (32-bit and 64-bit), Windows 7 (32-bit and 64-bit), Vista, XP, MAC OSX, Linux. Software Compability: Windows 8 (32-bit and 64-bit), Windows 7 (32-bit and 64-bit), Vista (SP1 and above), XP (SP2 and above), Windows Server 2008 (32-bit and 64-bit), Windows Server 2003 (32-bit and 64-bit with SP2 and above).
  • Windows 10/8/7/Vista SP1 and above (32/64 bit), Windows Server 2008 (32/64 bit), Linux Compatible.
  • NOTE: Refer the Installation Manual before use which is highly essential..
Check Stock

ROIPETK Mini 4-Pin to 2X Right Angle SATA Hard Drive Power Adapter Cable for Motherboard SATA Hard Drive Power Cable 18" (2Pack)

  • Connector 1: ATX 12V mini 4-pin connector..
  • Connector 2: 2 right-angle SATA 15-pin connectors..
  • Usage: The mini 4-pin connector plugs into the motherboard and the right-angle 15-pin SATA connector plugs into the hard drive..
  • Compatibility: This cable is compatible with motherboards with mini 4-pin ports (compatible with devices with SATA connectors, such as liquid CPU coolers, mechanical hard drives and SSDs), including. m410 m415 m510 m510s m510a m610 m710 b415 b250, thinkcentre m720 tower, st50 Server.
  • Specification. Length: 18 inches (46 cm).
Check Stock

SupaHub PCI-E to Type C (1), Type A (4) USB 3.0 5-Port PCI Express Expansion Card, Capable of Expanding + 2 USB 3.0 Ports with Internal 19-Pin Connector, Includes Drivers & Power Cables

  • ...REASE YOUR USB SPEED 10X! Your new PCIE USB 3.0 Expansion Card will support SuperSpeed USB 3.0 transfer rates up to 5Gbps. Backwards compatible with USB 2.0 and 1.1 devices. Actual speeds limited by the OS, setting of the device connected or the motherboard..
  • Operating System Compatibility: Supports Windows XP/Vista/Server/7/8/10, Linux. Windows XP, Vista, Server, Windows 7 and Linux are with included drivers. No additional drivers are needed for Win8/8.1/10.
  • COMPATIBILE with PCI-e 3.0 motherboards, and is backwards compatible with PCIe 2.0 and PCIe 1.0.
  • Fits any PCI Express x1, x4, x8 or x16 socket. Does not support PCI port. You don’t need to connect this USB 3.0 card to the PC power supply with the included 4-pin male to SATA 15-pin female power cable if the card can work smoothly with your computer..
  • INCLUDES 1x USB3.0 PCI-E Expansion Card, 1x CD Driver, 1x 4 Pin Male to SATA 15-pin Female Power Cable. If there is no CD drive with your computer or the CD driver couldn’t be opened, please contact us to get the driver download link..
Check Stock

NAS 8-Bay K7 Chassis Cable Management System PC Gaming Computer Case New Ultra Silence

  • You will get- A computer case with accessories including mute back fan*3, back panel*2, 8 hard disk stand, SATA data cable, various screws. ( Motherboard CPU and other accessories are not included ).
  • Support- Various ITX motherboards in the market: 17X17cm（6.7“*6.7“）.
  • ATX motherboards 24X24cm（9.6“*9.6“）.
  • DIY assembly of NAS servicer- The server assembles case not only good to meet the needs of computer hardware enthusiasts DIY, but also it will help you get a cost-effective server..
  • Ultra Silence – For powerful airflow out of the box, the case comes pre-equipped with 2 * 9025fan.
  • Mini Body- Miniature and elegant chassis, convenient placement, not occupy much space..
Check Stock

CableCreation 2 Pack Short Internal Mini SAS SFF-8087 to Right Angle SFF-8087 Cord, Internal Mini SAS to Mini SAS Cable, Compatible with RAID or PCI Express Controller, 2.5FT /0.75M

  • [ High Speed Data Transfer] CableCreation Mini SAS 36 Pin cable is a high-speed data storage interface designed for high-throughput and fast data access. This patch cord supports data transmission of 4 channels of 12 Gbps.
  • [ SFF-8087 Port ]This SFF-8087 interface is mainly used on the mini SAS 4i array card as an internal SAS cable. mass storage interconnection between a SAS controller and a SAS/SATA drive enclosure in a server or workstation.
  • [ Wide Compatibility ] Mini SAS 36 pin port compatible with Raid Cards like Dell R710, Dell R720, Dell T610 server, H200 controller, PERC H700, H310, PE T710, NORCO RPC-4220 , Norco RPC-4224.
  • [ 90 Degree Design] Right Angle design can make for better cable management in some situations, especially in tight spaces.
  • [ What You Get] You will get 2 x Mini SAS 36 Pin to 36 Pin cable, backed with 24 Months Warranty and lifetime technical service.
Check Stock

Synology 2 bay NAS DiskStation DS220j (Diskless), 2-bay; 512MB DDR4

  • 24/7 file server for your household to store share and backup personal data.
  • Award-winning DiskStation Manager (DSM) brings intuitive operation flow and reduces learning curve.
  • Access and share data with any Windows macOS and Linux computers or mobile devices.
  • Integrated media server to support multimedia content streaming. Freely access private cloud files on-the-go and back up mobile photos with iOS and Android apps.
  • Compatible Drive Type* (See all supported drives)-3.5 inch SATA HDD, 2.5 inch SATA HDD (with optional 2.5 inch Disk Holder), 2.5 inch SATA SSD (with optional 2.5 inch Disk Holder). Note- "Compatible drive type" indicates drives that have been tested to be compatible with Synology products. This term does not indicate the maximum connection speed of each drive bay.
Check Stock

Willhom 821-1501-A Second Hard Drive Cable Upgrade Kit SSD Replacement for Mac Mini A1347 2010 2011 2012 2014

  • Replace a malfunctioning or torn SATA hard drive cable for a Mac mini A1347 (Mid 2010-Late 2014).Or add a second hard drive or solid state drive to your Mac mini with this awesome kit.
  • Upgrading your Mac mini couldn't be simpler.You provide the drive, we include everything you need for a successful DIY repair.No need to pay the Apple premium for an expensive Mac mini server when you can do it yourself and save..
  • What's included: Secondary hard drive cable kit ,Upper (821-1501-A hard drive flex cable, nylon spudger, U-shaped logic board removal tool, 2 - L-shaped crowbars with torx and phillips heads, 4 - rubber mounting grommets, and 4 - screws).
  • Compatible with Mac mini A1347 Mid 2010 to Late 2014: Macmini4,1 Mid 2010: MC270LL/A or MC438LL/A,Macmini5,1 Mid 2011: MC815LL/A,Macmini5,2 Mid 2011: MC816LL/A,Macmini5,3 Mid 2011 (Server): MC936LL/A,Macmini6,1 Late 2012: MD387LL/A,Macmini6,2 Late 2012: MD388LL/A or MD389LL/A,Macmini7,1 Late 2014: MGEM2LL/A, MGEN2LL/A or MGEQ2LL/A.
  • Part Number: 076-1413, 922-9560, 821-1501-A.
Check Stock