Top Series Pipe Extrusion Reviews

1 x 1 1010 Series Aluminum Extrusion Profiles Frame Hinge Install Kit Connector Set 4pcs Zinc Alloy Hinge with T-Nuts Hex Screw Bolt for 1 Inch x 1 Inch Extrusion Profiles Rail

  • 1010 10 series aluminum profile T-slot connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC....
  • Package content: 4pcs 1 inch x 1 inches Aluminum Extrusion Profiles Frame Hinge, 16pcs galvanized T-slot nuts, 16pcs stainless steel hex socket cap....
  • Zinc alloy hinge used to connect pieces of 1" aluminum extrusion at a 90 degree angle suitable for most of 10 series aluminum profile extrusion.
  • Stainless steel hex socket button head bolts screws nuts surface chrome finish anti-corrosion, rustless, non-pollution.
  • Used to connect the connection between profiles and profiles or boards.
Check Stock

KOOTANS 20-Pack 90 Degree Angle Brackets Interior Joint Corner Bracket for European Standard 2020 Series T Slot 6mm Aluminum Extrusion Profile with Screws and Wrench

  • Package include: 20pcs L joint and 40pcs screws and wrench.
  • 2020 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters,....
  • Fit European standard 2020 series Aluminum extrusion.
  • Rigid connection, used to connect pieces of 20mm aluminum extrusion at a 90 degree angle.
Check Stock

PZRT 2020 Series Aluminum Profile Connector Set, 20pcs Corner Bracket,40pcs T-Slot Nuts, 40pcs M5x8 mm Hex Socket Cap Screw Bolt for 6mm Slot Aluminum Profile Accessories

  • 2020 Series Aluminum Profile Connector Set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
  • Cast Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion.
  • T-Slot Aluminum Extrusion M5x10 mm Hardware Slide In T-Nuts made from high quality carbon steel Galvanized,surface is plated with nickel for good rust resistance and better performance high hardness and a long service life..
  • High Quality Carbon steel Hex Socket Button Head Bolts Screws Nuts Surface chrome finish Anti-corrosion,rustless,non-pollution and high-hardness.used widely in the home and office appliance, communication equipments, ship assembly and other machinery industry.
  • Package Content: 20pcs 20mm 90 Degree Solid Cast Aluminum Corner Bracket,40pcs Carbon Steel Galvanized M5 x 10mm T-slot Nuts, 40pcs Carbon steel M5x8 mm Hex Socket Cap Screw Bolt.
Check Stock

UniTak3D Ender 3 Direct Drive Upgrade Kit Conversion Bracket Compatible with Creality Ender 3 V2,Ender 3 Pro and Voxelab Aquila 3D Printer Dual Gear Extruder&Bowden Extruder

  • 【Application】:The direct drive upgrade kit is suitable for Ender 3 V2,Ender 3 Pro,Ender 3,Voxelab Aquila 3D printers,NOT compatible with Ender 3 Max,Ender 3 Neo,Ender 3 V2 Neo,NOT compatible with TITAN extruder..
  • 【Outstanding Extrusion Control】:A direct drive extruder improves extrusion and retraction by removing the need for the Bowden (PTFE) tube. It provides precise retraction and a better print result..
  • 【Stable Operation】:The holes of the Split Type conversion bracket are perfectly aligned, with supports on both sides to keep the center of gravity in the middle, and the structure is more stable..
  • 【Flexible Filament Supported】: Compared with bowden extrusion,this direct drive extrusion greatly improves print quality of TPU and other flexible materials..
  • 【Easy Installation】:No X,Y or Z-axis build volume lost. No firmware or wiring modification.Just tear down the original Ender 3 series plate and mount this direct drive upgrade kit..
Check Stock

Iverntech MGN12 300mm Linear Rail Guide with MGN12H Stainless Steel Carriage Block for Ender 3, Corexy, Tronxy, Delta Kossel 3D Printers Upgrades and CNC Machine

  • Package Includes: 22pcs 20mm corner brackets, 44pcs M5x10mm T-slot nuts, 44pcs M5x10mm flanged button head socket cap screws bolts, 50pcs flat washers and 50pcs lock washers..
  • 2020 Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion..
  • The angle bracket is used to reinforce right-angle corner joints of aluminum extrusion profiles, insert the two ends of the bracket into the groove of the profile, and tighten the screw to fix the two profiles..
  • T-Slot Aluminum Extrusion M5x10mm Hardware Slide In T-Nuts made from high quality carbon steel, surface is plated with nickel for good rust resistance and better performance high hardness and a long service life..
  • 304 stainless steel M5x10mm button head socket cap screws features anti-corrosion, rustless, high-hardnes. M5 flat washers and lock washers can be used to adjust the length..
Check Stock

JOR Aquarium Siphon, Fish Tank Gravel Cleaner Kit, for Small Fish Tanks and Aquarium, 65-inches

  • ✔【Multifunctional Fish Tank Cleaner】This aquarium gravel cleaner integrates gravel cleaning, sand washing, water changer, and dirt suction functions. Composed of excellent PVC water pipe and ABS siphon head, it is resistant to extrusion, not easy to scratch and damage, and can be used for a long time. It can help you to achieve efficient cleaning of the fish tank, and there is no need to immerse your hands in water when using it!.
  • ✔【Safe Manual Design】Compared with most electric fish tank cleaning tools, this manual fish tank gravel cleaner is not electrified and will not harm your beloved fish during use. The manual design can also help you better control the pressure and water flow , So it is simpler, safer, and noiseless. In addition, the built-in 3D filter plug can effectively prevent your small fish, gravel and water plants from being sucked out..
  • ✔【Simple Working Principle】The principle of this aquarium siphon gravel cleaner is gravity, so the water outlet must be at least 19.7 inches lower than the water inlet when in use. The air-pressing button can produce a strong siphon after being pressed, so press the button several times until the water fills the entire inlet pipe, then release the button, and the water will flow out aut....
Check Stock

1515-ULS, 15 Series, 1.5' x 1.5' Aluminum Extrusion x 97'

  • 15 Series Ultra Lite Smooth T-Slotted Extrusion with Four Open T-Slots.
  • Compatible with all 15 Series Fasteners and Accessories.
  • The 1515-ULS is one of the lightest profiles in the 15 Series family..
  • Great for clean room applications, guards, enclosures, workstations, or any project that requires a clean, aesthetic look.
  • Made out of 6105-T5 aluminum (or equivalent) with a clear anodized finish.
Check Stock

Iverntech 4pcs 600mm 2020 V Type Black European Standard Anodized Linear Rail Aluminum Profile Extrusion for DIY 3D Printer and CNC Machine

  • 600mm V type black 2020 extrusion European standard aluminum profile.
  • Compatible with all 20 series accessories like M3, M4, M5 T nuts, and pulley wheel.
  • Aluminum alloy, black anti-oxidation surface treatment.
  • The length of each extrusion is 600mm, packing with 4pcs.
Check Stock

80/20 Inc, 1515-ULS, 15 Series, 1.5' x 1.5' Aluminum Extrusion x 72'

  • 15 Series Ultra Lite Smooth T-Slotted Extrusion with Four Open T-Slots.
  • Compatible with all 15 Series Fasteners and Accessories.
  • The 1515-ULS is one of the lightest profiles in the 15 Series family..
  • Great for clean room applications, guards, enclosures, workstations, or any project that requires a clean, aesthetic look.
  • Made out of 6105-T5 aluminum (or equivalent) with a clear anodized finish.
Check Stock

Official Creality Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 MAX/Ender 3 S1/Ender 3 S1 Pro 3D Printers, Support Printing Flexible Filament, BL Touch/CR Touch

  • ... All Metal Hotend Kit - All-metal Hotend Kit with heating block, titanium throat and cooling block, allows you to print high temperature materials at 300°C. This ender 3 v2 upgrades perfectly combine dual gear extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
  • Dual Gear Feeding, More Stable Printing -The ender 3 direct drive adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. With adjustable tensioner, allows you to fine-tune the pressure exerted by the drive gears onto the filament to print more exquisite models..
  • Support Printing Flexible and High Temperature Filament - With creality sprite extruder and up to 300°C and all metal hotend kit, the direct drive extruder supports 1.75 MM filaments, including PLA filament, TPU filament, PETG filament,....
Check Stock

80/20 Inc, 1020, 10 Series, 1' x 2' Extrusion x 72'

  • 10 Series Aluminum T-Slotted Extrusion with Six Open T-Slots.
  • Compatible with all 10 Series Fasteners and Accessories.
  • Six open available T-slots for mounting accessories.
  • Center cavity can be pressurized up to 150 psi.
  • Made out of 6105-T5 aluminum (or equivalent) with a clear anodized finish.
Check Stock

1020, 10 Series, 1' x 2' Aluminum Extrusion x 97'

  • 10 Series Aluminum T-Slotted Extrusion with Six Open T-Slots.
  • Compatible with all 10 Series Fasteners and Accessories.
  • Six open available T-slots for mounting accessories.
  • Center cavity can be pressurized up to 150 psi.
  • Made out of 6105-T5 aluminum (or equivalent) with a clear anodized finish.
Check Stock

Haldis 3D Extruder DDB Universal Nano Gear Dual Drive 3D Printer Extruder for Ender 3 Pro Ender 5 Pro CR10S Pro Mega S Prusa I3 Other DIY 3D Printer Kits DLC Right

  • 1.【Transparent Design】: Transparent and cool design, double gear extruder, when working, you can watch the printing filament go through to see how....
  • 2.【Dual Gear Extrusion】: Two stainless steel wheels grab the filament from both sides, high extrusion force, ensure smooth feeding and provide....
  • 3.【Adjustable Pressure Spring】: Easily adjust the clamping force of the filament, improved adjustment thumb screw, more comfortable adjustment and....
  • 4.【High Quality Material】: Transparent hard plastic shell and high quality metal extrusion wheel parts, the transparent material looks very....
  • 5.【WIDE COMPATIBILITY】: Compatible with most DIY 3D printers, such as Creality CR10, MK8 V6 CR10 Ender 3 series, Wanhao D9, Anet A8 E10, Geeetech....
Check Stock