Top Serial To Ethernet Gateway Module Reviews

SainSmart USB 4 Channel Relay Automation (5V)

  • NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay..
  • Onboard high performance microcontroller chip, CH340 USB control chip.With power LED indicator and relay status LED.On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously..
  • Module with overcurrent protection and relay diode freewheel protection..
  • NOYITO 8-Channel Micro USB Relay Module ASIN:B09RGTSHHW.
  • NOYITO 4-Channel Micro USB Relay Module ASIN:B09RGVQXXT.
Check Stock

2Pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial Transceiver Module Bi-Directional Serial Support Slave and Master Mode

  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port....
  • Operating voltage: 3.3V(Note:SPP-CA Bluetooth module serial port level to 3.3V, if connect 5V level,the system needs to increase the level conversion....
  • Small size, low power consumption,high sensitivity for send and receive.
  • Allows your device to both send or receive the TTL data via Bluetooth....
  • Defaults: Salve, baud rate 9600, Bluetooth name HC-06, pairing password 1234, LED status light on.Core module uses HC-06, leads from the module....
  • Applications: The Bluetooth module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial....
Check Stock

Kovoq Smart Home Remote Stater Kit for Bedroom/Nursery Room, Smart Caregiver Pager, Control Smart Thermostat, Routines, Works with Homepod, Nest Audio, up to 330ft Range, 6 Customizable Big Buttons

  • 【WIFI & Zigbee Hub Gateway】Please make sure your smart devices is compatible with Tuya. This Tuya ZigBee smart wireless gateway works with 2.4G WIFI and ZigBee HA 3.0. It is integrated WIFI module and Zigbee module, so that the Tuya Zigbee sub-devices can be controlled remotely via WiFi on the APP or locally controlled via Zigbee network. Via Zigbee protocol, even if WiFi is not available at home, it will not affect local control of the sub-devices..
  • 【Group Control & APP Push】 Automated scenarios can be set through the APP. Add your Tuya Zigbee devices on Tuya APP (make sure the sub-devices support Tuya), and create smart group for automated smart scenarios applications. Through smart settings, the smart home hub gateway will automatically push notifications to the APP. This Zigbee WiFi Gateway Hub supports up to 30 sub-devices online at the same time..
  • 【Compatible with Tuya ZigBee Hub (Also Smartthings Supported)】- Considering the status of unstable network or no network, ZigBee 3.0 switch module is really an irreplaceable must to combine with ZigBee gateway to form a home LAN, NO MORE WORRY about no and weak network, easily get control via connected devices as long as there is stable ZigBee signal.
  • Allows for more devices connected via Zi....
Check Stock

Digi International 70001851 230Kbps Ethernet Device Server

  • Lantronix 2 Port Serial (rs232/ Rs422/ Rs485) To Ip Ethernet Device Server - Us Domestic 110 Vac - Convert From Rs-232.
  • Rs-485 To Ethernet Using Serial Over Ip Technology.
  • One 10/100 Mbps Fast Ethernet Rj-45 Port.
Check Stock

FIOS Verizon Gateway FIOS Quantum-G1100

  • FRONTIER is Now the FiOS Provider in most of the continental U.S states.FRONTIER/Verizon FiOS Quantum G1100FT lets you transmit and distribute digital entertainment and information to multiple devices in your home/office..
  • FiOS FRONTIER Gateway G-1100FT supports networking using coaxial cables, Ethernet, or Wi-Fi, making it one of the most versatile and powerful gateways available..
  • System and software requirements are:A computer or other network device supporting Wi-Fi or wired Ethernet. A web browser, such as Chrome, Firefox, Internet Explorer 8 or higher, or Safari 5.1 or higher 1. 2/.
  • Your Gateway features include: Support for multiple networking standards, including – WAN – Gigabit Ethernet and MoCA 2.0 interfaces –LAN – 802.11 b/g/n/ac, Gigabit Ethernet and MoCA 2.0 interfaces Integrated wired networking with 4-port Ethernet switch and Coax (MoCA).
Check Stock

Intel Server System SR1530HCLSRNA

  • 1u Rm Sr1530hcls Dp 3x Hs Sas 45nm 400wType Server Form Factor Rack-mountable - 1U Approximate Dimensions (WxDxH) 16.9 in x 20 in x 1.7 in Localization North America.
  • Server Scalability 2-way Processor No CPU RAM 0 MB (installed) / 12 GB (max) - DDR II SDRAM - ECC Storage Controller Serial Attached SCSI ( Serial Attached SCSI ).
  • IDE Server Storage Bays Hot-swap 3.5" Hard Drive None..
  • Monitor None. Graphics Controller ATI ES1000 - 16 MB Networking Network adapter - Ethernet, Fast Ethernet, Gigabit Ethernet - Ethernet Ports : 2 x Gigabit Ethernet.
Check Stock

Dell PowerEdge M1000e H330H Blank Insert Module

  • Resilient HA stacking with up to 6 switches (only SFP+ ports can be used for stack connections).
  • Up to 24 auto-sensing 1/10Gb Ethernet switching ports available.
  • 16 internal server 10Gb (KR) Ethernet ports with auto-negotiation capability to 1Gb Ethernet.
  • 4 external integrated 1/10Gb SFP+ Ethernet ports.
  • Flexible media choices for up to 4 additional 1/10Gb uplink ports with one optional FlexIO Module: 4-port SFP+ 10GbE module 3-port CX-4 10GbE copper module (supports 10Gb connections only) 2-port 10GBASE-T 10GbE copper module (supports 1/10Gb connections).
Check Stock

Treedix Mini Pocket AVR Programmer Reset Reprogrammed Module Bootloader BootRescure Compatible with Arduino Controller Board

  • Development board production tool, no other equipment or compiler necessary, Abnormal status recovery bootloader, DIY development board writing bootloader..
  • Used to reprogram the Arduino BootLoader to the microcontroller chip..
  • Easy to program through the ICSP (In-Circuit Serial Programming) interface. Just directly plug it onto the ICSP interface to complete the bootloader..
  • This module can be connected to the ICSP interface, which is the 6 pin headers terminal on the Arduino controller board, which match 5V, MISO, MOSI, SCK, GND and RESET..
  • Compatible with Arduino UNO/UNO Wifi/Nano/Ethernet/Pro/Pro mini/Duemilanove/Diecimila/Mega/Mega 2560/Mega ADK/Leonardo..
Check Stock

Aoicrie 16x2 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter, IIC I2C TWI 1602 Serial LCD Module Display, for Mega 2560

  • IIC I2C TWI 1602 Serial LCD Module Display for R3 Mega 2560 16x2..
  • Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line)..
  • Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly..
  • With a potentiometer used to adjust backlight and contrast.Power supply: +5V, Address of the module: ox27..
  • Widely Applications: LCD display module based on the popular HD44780 controller, works great with for Mega2560 board and other micro-controllers..
Check Stock

Treedix USB to TTL Converter CH340 Module 3.3V/5.5v Serial Converter Development Tool with Micro USB Adapter for Arduino

  • Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
  • Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
  • The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
  • There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
  • Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.
Check Stock

HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot

  • ☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • ☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
  • ☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
  • ☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
  • ☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
Check Stock

Carel Temperature Thermostat IR33F0AHA0 with Temperature Sensor Probe 115V / Technician Ready by Xiltek

  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity,....
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX....
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your....
Check Stock

Lantronix xDirect - Device server - 10Mb LAN, 100Mb LAN, RS-232, RS-422, RS-485 - AC 100/230 V - XDT4851002-01-S

  • Dual Serial Device Server: Cpu: Cortex-M4 120Mhz, Serial RS485 & RS232 to Ethernet Server, 2 Serial Ports: 1 Port is RS232, 1 Port is RS485, 1 RJ45 Ethernet Port. Support RS232 & RS485 Working at The Same Time..
  • Data Link Protocol: Ip£¬Tcp£¬Udp£¬Dhcp£¬Dns£¬Http£¬Arp£¬Icmp£¬Web Socket£¬Httpd Client..
  • Speed: 10 / 100 Mbps, Mdi / Mdix Cross Direct Automatic Switching, Baud Rate: Rs-232£º600Bps ~ 230. 4Kbps£¬Rs-485£º600Bps ~ 1Mbps.
  • 1.5Kv Electromagnetic Isolation, Shell Isolation Protection.
  • Configure Via Web Browser or Virtual Com Software Interface.
  • Working Temperature: -40 ~ 85¡ãC, Power Consumption: 003c 1W..
  • What's in The Box: 1 x Dual Serial Device Server, 1 x 5V 1A Power Supply, 1 x Female to Female Serial Cable..
Check Stock