Top Serial Protocol Reviews

HUAZHU AT-09 1PCS Bluetooth 4.0 Module Transceiver BLE CC2540 CC2541 HM-10 MLT-BT05

• ฅฅ It adopts CC2541 chip of American TI Company, configures 256Kb space, and follows V4.0 BLE Bluetooth specification..
• ฅฅ Input voltage: 3.3V/5V only needs a set of power supply..
• ฅฅ Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible..
• ฅฅ It supports UART interface and supports SPP Bluetooth serial port protocol..

SparkFun ESP8266 Thing - Dev Board

• All module pins broken out - On-board FTDI USB-to-Serial.
• 802.11 b/g/n - Wi-Fi Direct (P2P), soft-AP.
• Integrated TR switch, balun, LNA, power amplifier and matching network - Integrated PLLs, regulators, DCXO and power management units.
• Integrated low power 32-bit CPU could be used as application processor.

DIYmall VK-172 VK 172 Gmouse G-Mouse USB GPS Dongle Glonass Support Windows 10/8/7/vista/XP/Raspberry PI Vehicle Aviation Tracker Pack of 1pc

• Works with Windows,Andorid,Linux,Raspberry pi.Support Google Earth.It can not work with IOS system..
• The default output is the product GPs protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data..
• Note: This dongle only can work outdoor. If you want to let it work indoor, you need have GPS amplifier. Otherwise the GPS can not lock..
• If you need some driver links and using videos for VK-172,Please contact us..

Dorhea 3PCS BLE 4.0 Bluetooth Module AT-09 for Ardu-ino CC2540 CC2541 BLE Serial Wireless Module Compatible with HM-10

• The master-slave module has three functions of transparent transmission, remote control and PIO acquisition. It can be switched and set through the AT command set. It is easy to use the same as the Bluetooth serial port module you have used before, without changing the PCB and the lower computer program..
• Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible..
• Support UART/I2C interface, and support SPP Bluetooth serial port protocol, has the advantages of low cost, small size, low power consumption, high sensitivity of sending and receiving, etc., only need to be equipped with a few peripheral components to achieve its powerful functions..
• This module is mainly used in the field of short-distance data wireless transmission. It can be easily connected to the Bluetooth device of the PC, or the data between the two modules can be intercommunicated..
• When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..

HiLetgo 2pcs 5V 2004 1602 LCD Display IIC I2C Adapter IIC Serial Interface Adapter for Arduino Robort Parts

CYSune Digital Logic Analyzer LA104 USB Mini 4 Channels 100MHz Max Sampling Rate Built in 8MB Flash Storage 2.8 Inch Oscilloscope

• Machine introduction: LA104 is a four-channel logic analyzer with built-in screen and battery. The casing of LA104 is made of aluminum alloy through CNC..
• Easy to use: It is compact and portable, making it easy for users to work on bench or outdoors..
• The effect is obvious:LA104 has a 2.8-inch LCD display that allows the measured logic waveform to show directly on the screen, without connecting to other external display devices..
• Multiple trigger modes: There are three serial protocol analyses: SPI, I2C, UART, supporting user-defined protocol mode.
• Muti-functional: suitable for digital hardware verification and debugging, monitoring, measurement and optimization of digital hardware performance, and integration, debugging and verification of embedded software..

Dorhea VK172 G-Mouse USB GPS Dongle Glonass VK-172 GMouse Receiver USB Navigation Module Compatible with Windows 10/8/7/vista/XP/Raspberry PI Vehicle Aviation Tracker

• This usb gps works with Windows, Linux, Raspberry PI and Google Earth, not for IOS Android.
• The vk-172 gps is NOT plug and play for most device. You need to install driver before make it work. Raspberry Pi and linux no need driver..
• VK-172 automatically adapt the baud rate, The baud rate has any data output..
• The default output is GPS protocol data,you can modify the PS/GLONASS protocol data by testing software or serial commands..
• VK-172 built-in high-gain LNA, dual-channel LDO, large area radiation GPS optional baud rate 4800, 9600, 19200, 38400, 5700, 115200, etc..

SparkFun ESP8266 Thing - Dev Board (with Headers)

• Features: All module pins broken out - Onboard FTDI USB-to-Serial - 802.11 b/g/n.
• WiFi Direct (P2P), soft-AP - Integrated TCP/IP protocol stack - Integrated TR switch, balun, LNA, power amplifier and matching network.
• Integrated PLLs, regulators, DCXO and power management units - Integrated low-power 32-bit CPU could be used as application processor.
• +19.5dBm output power in 802.11b mode - Pre-Soldered Headers.

Dorhea 2PCS VK172 G-Mouse USB GPS Dongle Glonass VK-172 GMouse Receiver USB Navigation Module Compatible with Windows 10/8/7/vista/XP/Raspberry PI Vehicle Aviation Tracker

• This usb gps works with Windows, Linux, Raspberry PI and Google Earth, not for IOS Android.
• The vk-172 gps is NOT plug and play for most device. You need to install driver before make it work. Raspberry Pi and linux no need driver..
• VK-172 automatically adapt the baud rate, The baud rate has any data output..
• The default output is GPS protocol data,you can modify the PS/GLONASS protocol data by testing software or serial commands..
• VK-172 built-in high-gain LNA, dual-channel LDO, large area radiation GPS optional baud rate 4800, 9600, 19200, 38400, 5700, 115200, etc..

SparkFun ESP8266 Thing - Dev Board - WiFi-enabled microcontroller compatible with Arduino for Internet of Things WiFi Development On-board FTDI USB-to-Serial converter PCB trace antenna U.FL connector

• All module pins broken out for ease of use. On-board FTDI USB-to-Serial. +19.5dBm output power in 802.11b mode.
• 802.11 b/g/n. Wi-Fi Direct (P2P), soft-AP. Integrated TCP/IP protocol stack.
• Integrated TR switch, balun, LNA, power amplifier and matching network. Integrated PLLs, regulators, DCXO and power management units.
• Integrated low power 32-bit CPU could be used as application processor.
• The USB-to-serial converter means you don't need any peripheral components to program the chip. Simply plug in a micro USB cable..

Hantek DSO4202C Digital Multimeter Oscilloscope USB 200MHz 2 Channels LCD Display Waveform Generator

• 100 MHz bandwidth, 1GSa/S sampling rate, 8M memory depth and built-in 25MHz DDS generator.
• 14 kinds of trigger modes, 5 kinds of serial protocol and decodes, and 32 kinds of auto measurements.
• Comes with 1 PP150 100MHz probe, 1 USB cable, 1 clip line and 1 US power cable.
• Inludes another Hantek probe for 2nd channel.
• Don't confuse it with professional lab scopes, or compare its built-in DDS generator with arbitrary ones.

Hantek DSO2C15 2 CH Oscilloscope Without Built-in DDS Generator, 150MHz 1GS/s

• 150 MHz bandwidth, 1GSa/S sampling rate, 8M memory depth.
• 14 kinds of trigger modes, 5 kinds of serial protocol and decodes, and 32 kinds of auto measurements.
• Comes with 1 PP150B 150MHz probe, 1 clip line, a USB cable and 1 US power cable.
• Inludes another Hantek PP150 100MHz probe for 2nd channel.
• Don't confuse it with professional lab scopes.

AITRIP 5 pcs HD44780 1602 LCD Display Module DC 5V 16x2 Character LCM Green Blacklight for Arduino Also Compatible with Raspberry Pi STM32 DIY Maker Project(Without Adapter Chip)

• Easy to use: less I/O ports are occupied, only 4, VCC, GND, SDA (serial data line), SCL (serial clock line).
• Use the i2c protocol to reduce the occupation of I/O ports, making it easier to add to the project, and less wiring is more beautiful.
• Suitable for: compatible with all current development boards, for Raspberry pi, Tinker board, Nanopi, Banana pi, stm32 and so on.
• With a potentiometer applied to adjust backlight (color: blue) and contrast.
• Commonly applied in: internet of things, DIY project, home animation, smart building, maker's DIY project.
• Size: 80 x 35 x 11 mm, mini size is easy to carry and store.
• Packing included: 5 pieces HD44780 1602 LCD display module Green (Without Adapter Chip).