Top Sequence Controller Reviews

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

Supermicro DDR2 667 LGA 775 Server Motherboards X7DWN+-O

  • CPU: Dual 771pin LGA Sockets Supports Intel 64-bit Quad-Core Xeon 5400/5300 Sequence/ Dual-Core Xeon 5200/5100 Sequence Processors, upto 3.4GHz.
  • Memory: 16x 240pin DDR2-800/667/533 FB-DIMMs, Dual Branch Memory Bus, ECC, Max Capacity 128GB.
  • Video: ATI ES1000 Graphics Controller w/ 32MB Video Memory.
Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

BETMI Controller Paddles Back Button Attachment/Turbo Function FPS/Customization Mapping Buttons/Audio Jack for PS4 Playstation 4 Controller

  • 【BROAD COMPATIBILITY & SIMPLE OPERATION 】After testing, Back Button Attachment is compatible with 80% of the controller for PS4 on the market.can conveniently map the target buttons on the Paddles(M1, M2) ..
  • 【Burst Function】After mapping the target buttons to "M1 or M2", press "Turbo +M1 or M2" at the same time, "M1 or M2" will get the burst function, repeating it will cancel the function..
  • 【Simple Programming Function Setting】①Long press the SET button for 2 seconds,X light flashes quickly.②Press the M1 or M2 (Press once to switch once ), lights flashing slowly in sequence(The flashing sequence is ×, ○, △, □, R3, L3, R2, L2, R1, L1).③Just to long press the SET button for 5 seconds, the programming indicator LED will change from fast flashing to off, and the M1/2 function is cleared..
  • 【Wireless Design】No other tools are needed, just plug in the controller , and do some simple settings.(NOTE: The handle should also have programming and memory programming functions whenit is not connected to Bluetooth state and charging state.).
  • 【DESIGN FOR HANDS 】the unique paddles position design is more suitable for players with small hands and brings you more fun..
Check Stock

ECO-Worthy 30A Solar Charger Controller Solar Panel Battery Intelligent Regulator with Dual USB Port Auto 12/24V PWM Positive Ground…

  • [30A Solar Charge controller]: the solar charger controller compatibility with 12V 24V system. Discharge Current: 10A,build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone chargeing.
  • [Multiple Protection Functions]: ECO-WORTHY solar controller has short-circuit protection, open-circuit protection,reverse protection, over-load protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery.
  • [Battery Type]: The charge regulator is suitable for lead-acid batteries, gel batteries and lithium phosphate batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
  • [LCD Display]: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc..
  • [Easy to Install and Operate]: The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.Dual mosfet Reverse current protection, low heat production. ( N....
Check Stock

30A Solar Charge Controller, Solar Panel Charge Controller 12V 24V Dual USB Charge Regulator Intelligent, Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours(30A)

  • ☀【Dual USB】: This 30a solar charger controller compatibility with 12V 24V system. Fully 4-Stage PWM charge (Boost, ABS, Equalization, Float), the power MOSFET is used as and electronic switch without any mechanical switches and equipped with industrial-grade STM 8 microprocessor to prolong your battery life cycle..
  • ☀【LCD Display 】: Backlight LCD display PV/Battery/Load charge and discharge parameter. Adjustable Floating voltage/LVD/LVR/Load Timer for this charge controller according to needs.ADD Feature: Charge and Discharge Current, cumulative power generation and discharge power query.
  • ☀【Lead-acid Batteries】: Solar Charge controller is only suitable for lead-acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, Liions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
  • ☀【PWM Charge Controller Protection】:Dual MOSFET Reverse current /overheat /Under-voltage discharge discharge /short-circuit /open-circuit / over-load /over-charging protection.more safe for home, industrial, commercial etc.
  • ☀【Easy to Install and Operate】: The charge controller should connect the battery first, then the solar panel, an....
Check Stock

EEEKit 20A Solar Charge Controller, 12V/24V Solar Panel Battery Intelligent Regulator with Dual USB Port PWM Auto Parameter Timer Setting Adjustable LCD Display, Blue

  • 20A SOLAR CHARGE CONTROLLER: 20A Solar panel battery intelligent regulator are UL 1741 certified, the solar charger controller compatibility with 12V 24V system. Discharge current: 10A, build-in industrial microcontroller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone charging..
  • SIX PROTECTION FUNCTIONS: 20A solar controller has Short-circuit protection, Overload protection, Over Current Protection, Overcharge protection, Under-voltage protection, Over-voltage protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery..
  • BATTERY TYPE: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries. In order to protect the lifespan of the battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically..
  • FUNCTIONAL LCD DISPLAY: Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, suitable for home, industrial, commercial, etc..
  • EASY TO USE: The charge controller should connect the battery first, then the solar panel, finall....
Check Stock

PS4 Controller Paddles,Wireless PS4 Back Button Attachment, Controller Adapter with MODS & Paddles for PS4

  • Function Setting：❶.Long press the SET button for 2 seconds,X light flashes quickly.❷.Press the M1 or M2 (Press once to switch once ), lights flashing slowly in sequence（Flashing Sequence:×→〇→Δ→□→R3→L3→R2→L2→R1→L1).❸.When the target button is flashing, press the SET button,finish setting..
  • Turbo function:Press the M1or M2 and Turbo at the same time, the function key has Turbo continuous launch function .Repeat this step to cancel..
  • Clear Cache and Memory Programming Function:Long press the SET button for 5 seconds,the LED changes from blinking to off and the M1/M2 function is cleared.Insert the handle again and still retain the last programming function.The factory default has no definition..
  • Wireless Design: No other tools are needed, just plug in the controller , and do some simple settings ..
  • NOTE: The handle should also have programming and memory programming functions whenit is not connected to Bluetooth state and charging state..
Check Stock

Ableton Push 2 Software Controller Instrument

  • 64-pad controller made to integrate seamlessly with Ableton Live Play beats live or step sequence them Intuitively play notes and chords.
  • Push is an instrument that puts everything you need to make music in one place—at your fingertips.
  • To stay in the flow, you need to be able to capture your ideas quickly, and you need technology to stay out of the way.
  • Computers make it possible for one person to create whole worlds of sound.
Check Stock

DJI Mini 3 Pro Two-Way Charging Hub

  • The Two-Way Charging Hub can charge the remote controller and three batteries in sequence. It can also be used as a mobile power source and store batteries for convenient carrying..
  • With the DJI 30W USB-C Charger, three DJI Mini 3 Pro Intelligent Flight Batteries can be fully charged in just three hours, greatly improving the charging efficiency..
  • Compatibility: DJI Mini 3 Pro, DJI Mini 3.
Check Stock

XLN Addictive Keys Studio Collection

  • REINVENT ANY BEAT: Manipulate audio effects at a molecular level by controlling pitch, rhythm, and texture at the finest resolution on the sound market..
  • CREATE RHYTHM EFFECTS: Add new, complex polyrhythmic beats to your sound with unique isorhythm and playback speed settings..
  • EXPERIMENT WITH SOUND: Explore presets, drum samples, and wavetables designed by today's top musicians, production talent and DJs, including BT..
  • CONTROL YOUR AUDIO: Easily trigger and sequence complex beat patterns and sound samples using any MIDI controller..
  • IZOTOPE SOFTWARE: Driven by a passion for audio, iZotope develops innovative products that inspire and enable people to be creative. Descript.
Check Stock

Battery Tender 12V, 75 AMP Booster Battery Charger with WiFi & LCD

  • Output: Charging and Maintaining @ 1.25 Amp, Battery Boost @ 20A, Engine Start Assist @ 75A, 1 Amp 13V Power Supply.
  • Wireless connectivity to mobile device via WiFi (point to point and network) to the Deltran Connected App via mobile device.
  • Includes: 75 AMP booster charger with integrated alligator clips, 5 year warranty, and lifetime customer service.
  • Smart charging micro-controller constantly updates charge sequence for smooth transitions between charging steps.
  • For all size AGM, Flooded and Lithium (LiFePO4) batteries.
Check Stock

Arturia BeatStep USB/MIDI/CV Controller and Sequencer

  • VERSATILE MIDI CONTROLLER AND SEQUENCER: BeatStep is a chameleon controller and sequencer that provides nearly endless possibilities! Highly versatile, it allows you to trigger clips in apps like Ableton Live, finger-drum or make beats effortlessly, tweak your sound in real-time - or all at once! In addition, its compact format makes it the perfect companion on the road or in the studio..
  • TWO IN ONE…: With MIDI Controller mode, the 16 velocity- and pressure-sensitive pads make it the perfect compact solution for playing percussion, while sequencer mode turns it into an easy step sequencer. The 16 encoders will adjust pitch for the associated step. 16 memories allow for instant recall of your patterns while the pad scale modes, sequence playback modes and time division functions allow for real time performance changes..
  • …BOTH AT ONCE: This MIDI keyboard is both a pad/knob controller AND a step sequencer. But the best part is that you can run them both at the same time! You can have the step sequencer play your sound through the CV/Gate output, while you switch to CONTROL mode and trigger clips on Ableton Live and use the encoders to manipulate your VST version of SEM V. All at once!.
  • ALL THE CONNECTIONS YOU NEED: BeatStep has MIDI, USB and CV connect....
Check Stock