Top Separate Logic Voltage Support Reviews

2pcs USB Logic Analyzer Device with USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug for Arduino ARM FPGA M100 SCM

  • ✹✹The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions..
  • ✹✹Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • ✹✹Input voltage range: -0.5V to 5.25V.
  • ✹✹ART, SPI, IIC and other communication debugging, let you get twice the result with half the effort. 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols..
  • ✹✹his item is an inexpensive logic analyzer designed to be compatible with Saleae Logic Analyzer software, but this item is not an official Saleae product. This item is also supported by the free software by Sigrok called PulseView..
Check Stock

Aoicrie USB Logic Analyzer Device with EMI Ferrite Ring USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug Professional Microcontroller Debug USB Powered FPGA for ARM FPGA M100 SCM

  • This item is an logic analyzer designed to be compatible with Logic Analyzer software, The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • Input High Voltage: 2.0V to 5.25V, Input Impedance: 1Mohm || 10pF (typical, approximate).
  • A total of 8 digital channels, the voltage range is 0V and 5.5V, of which 1.5V is the voltage threshold, below 1.5V is considered low, above 1.5V is considered high, Works with 5V, 3.3V, 2.5V, 2.0V systems. May work with 1.8V but not recommended.Error/Accuracy: pulse-width measurement: +/- 42ns (at 24MHz)..
  • UART, SPI, IIC and other communication debugging, 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols.Suitable for single chip development,ARM system development,FPGA development..
Check Stock

DBParts New for 20PCS SN74HC10N DIP-14 74HC10 74HC10N Triple 3-Input NAND Gates

  • Product Category: Gates (AND / NAND / OR / NOR) , Logic Family: LS , Logic Type: Bipolar.
  • High Level Output Current: - 0.4 mA , Low Level Output Current: 8 mA, Propagation Delay Time: 15 ns @ 5 V.
  • Supply Voltage (Max): 5.25 V , Supply Voltage (Min): 4.75 V.
  • Maximum Operating Temperature: + 70 C , Minimum Operating Temperature: 0 C , Operating Supply Voltage: 5 V.
  • Package / Case: PDIP-14 , RoHS: Yes , Number of Circuits: Quad, Number of Output Lines: 1 , Number of Lines (Input / Output): 2-IN / 1.
Check Stock

UpBright 12V AC/DC Adapter Compatible with LogicMark Guardian Alert 911 GA911 Emergency Button Pendant Model 30511 30911 Logic Mark HHD12-300 HH012-300 HHD12300 Power Supply Cord Battery Charger

  • World Wide Input Voltage 100-240VAC 50/60Hz.OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP:....
  • UpBright New Global 12V AC / DC Adapter Compatible with LogicMark Guardian Alert 911 Emergency Button Pendant Model 30511 Logic Mark 12VDC Power....
  • Fits LogicMark Guardian Alert 911 GA911 Emergency Alert System 30911 Base Unit Logic Mark.
  • Logic Mark Model: HHD12-300 HH012-300 HHD12300 HH012300....
Check Stock

Terasic DE10-Lite

  • ANTI-INTERFERENCE & FASTER: This programmable logic controller uses industrial-grade 32-bit MCU with strong anti-interference and faster speed. The transmission baud rate is 9600..
  • PROGRAMMABLE IN LADDER LOGIC LANGUAGE: Program is written in ladder logic programming language, supports ladder logic programming language programming, downloading and monitoring, supports for GX-Developer, GX-work2..
  • SUPPORTS HMI CONNECTION: Supports HMI connection. Programming port is the port for program upload, download and HMI communication..
  • 16 POINT INPUT & 16 TRANSISTOR OUTPUT: The PLC board supports 16 point input and 16 transistor output. Y0-Y3 4 channels output 100k, 200MA, externally added with freewheeling diode up to 3A and Y4-Y17 for 24V, 3A..
  • WIDELY USED: Widely used for fields of printing, metallurgy, food, textile, packaging, home, building materials, plastics, chemicals. The industrial control board is powered by DC 24V. Do not input AC or 220V voltage..
Check Stock

HiLetgo USB Logic Analyzer Device With EMI Ferrite Ring USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug

  • The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • Input Impedance: 1Mohm || 10pF (typical, approximate).
Check Stock

NOYITO USB Logic Analyzer Device with USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug

  • The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • Input High Voltage: 2.0V to 5.25V003cbr003e.
  • Input Impedance: 1Mohm || 10pF (typical, approximate).
Check Stock

Comidox 1Set USB Logic Analyzer Device Set USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug for Arduino ARM FPGA M100 Hot

  • This item is an inexpensive logic analyzer designed to be compatible with Saleae Logic Analyzer software, but this item is not an official Saleae product. This item is also supported by the free software by Sigrok called PulseView..
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz..
  • The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions..
  • A total of 8 digital channels, the voltage range is 0V and 5.5V, of which 1.5V is the voltage threshold, below 1.5V is considered low, above 1.5V is considered high..
  • UART, SPI, IIC and other communication debugging, let you get twice the result with half the effort. 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols..
Check Stock

Graphtec America GL240 Data Logger

  • 10 Channels for Voltage, Temp, Humidity, Pulse and Logic Measurements.
  • Isolated Input System Ensures Signals are Not Corrupted by Other Channels.
  • Supports 20mV to 100 Volts, Thermocouple Type: R, S, B, K, E, T, J, N and W and 4 Pulse or Logic Channels with Optional Cable (#B-513).
  • WLAN Compatible Using GL100-WL and Optional Wireless LAN Unit (B-568).
Check Stock

DKARDU USB Logic Analyzer Device 24MHz 8CH 8 Channel UART IIC SPI Debug with Mini USB Cable Dupont Cable 6 Colors Test Hook Clip Set for Arduino FPGA M100 SCM

  • 【Product introduction】: This item is an inexpensive logic analyzer designed to be compatible with Saleae Logic Analyzer software..
  • 【Applicable to various occasions】: The logic sampling rate of each of the 8 channels is 24M/s, generally about 10M, which is sufficient for various occasions.
  • 【Channel value】: A total of 8 digital channels, the voltage range is 0V and 5.5V, of which 1.5V is the voltage threshold, below 1.5V is considered low, above 1.5V is considered high..
  • 【Sampling rate up to】: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz..
  • 【Automatic analysis】: UART, SPI, IIC and other communication debugging, let you get twice the result with half the effort. 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols..
Check Stock

4Pack L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560 (4 PACK)

  • Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability,low calorific value and strong anti-interference ability..
  • This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip,please use an external 5V logic supply when using more than 12V driving voltage..
  • Using large capacity filter capacitor,this module can follow current to protect diodes,and improve the reliability..
  • Dual-channel H-bridge driver working mode creates higher working efficiency.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
Check Stock

USB Logic Analyzer Device with EMI Ferrite Ring USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug for Arduino ARM FPGA M100 SCM

  • The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
  • Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
  • Input Impedance: 1Mohm || 10pF (typical, approximate).
Check Stock

ACEIRMC 8pcs L298N Motor Driver Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power MEGA R3 Mega2560

  • When you are driving voltage (above logo for the 12 v input, can actually accept input range is 7 to 12 v) for 7 v to 12 v, can make to onboard power supply 5 v logic, when using the onboard after 5 v power supply, interface of + 5 v The power supply does not input voltage, but can yield 5V voltage for external use..
  • The chip manual proposes to support 35V, but according to the book When the maximum voltage is applied to the maximum voltage of 298 conservative applications to 24V, for example, the motor with a rated voltage of 18V shall be driven.
  • Great for for Arduino DIY Smart Car Robot Power MEGA R3 Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits.
  • No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use.
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient.
Check Stock