Lambro 60633 Semi-Rigid Aluminum Dryer Ducting, 4 inch x 8 Ft, Silver
- Semi-rigid duct will not collapse, sag or kink.
Top Semi Rigid Flexible Duct Reviews
Builder's Best 084131 SAF-T Readi-Pipe Flexible Semi Rigid Aluminum Dryer Vent Duct, 2 Clamps Included, 4
- This Readi Pipe Kit includes an 8-foot durable semi-rigid (flexible) aluminum dryer duct with pre-treated ends and two steel screw clamps..
- Made with 100% aluminum, this duct features soft cuff ends that are factory treated for quick and secure attachment to standard 4" connections..
- Steel screw clamps tighten down over the pre-treated ends for secure connections..
- Designed for use as a dryer transition duct..
- Quality made in the USA by Builder's Best, Inc. Builder's Best brand is a US registered trademark. SAF-T-DUCT is a registered trademark by Builder's Best, Inc. SAF-T-DUCT Dryer Venting is the trusted solution for professional installers nationwide. It meets all clothes dryer manufacturer specifications..
Builder's Best 84018 SAF-T Metal Single Elbow Dryer Vent Duct Kit, UL Listed, 4" Diameter x 8' Length, Silver
- This is a 8-feet UL Listed flexible metal (semi-rigid) transition duct attached to one Close Elbow. The original Close Elbow by Builder's Best is designed to make 90˚ turns within 4″..
- Maximum velocity for this duct is 5,000 FPM. Temperature can range from - 100 degrees Fahrenheit to + 430 degrees Fahrenheit..
- UL Listed and Labelled: Complies with all clothes dryer manufacturer recommendations.
- Comes with 2 additional steel screw clamps.
- Quality made in the USA by Builder's Best, Inc. Builder's Best brand is a US registered trademark. SAF-T-DUCT is a registered trademark by Builder's Best, Inc..
Fette Appliance - Flexible Dryer Vent Cleaning Kit, Lint Remover, Extends up to 12 Feet, Synthetic Brush Head, Use with or Without a Power Drill
- The tool is designed for “rigid metal” or “semi-rigid metal”. It should not be used on flexible foil..
- Contains a high quality synthetic brush head and 9 durable rods that extend up to 12 feet. This professional Dryer Vent Cleaning Kit can be used with or without a power drill..
- It is easy to use, delivers superior results and helps you prevent costly repairs. It helps prevent dryer fires by regularly removing dangerous lint buildup..
- Premium Quality Fette Appliance Product..
Deflecto Dryer Vent Hood, 4\
- Includes 2 hooker upper protectors, 1 semi-rigid aluminum duct and 1 gasket.
- Duct twists on hooker upper protectors and slides over dryer vent and outlet pipe.
- Protects duct from being smashed behind dryer which can cause unsafe dryer operation and longer drying times.
- No clamps, no tools, no tape. Gasket may be needed for proper fit on some dryers.
Deflecto Vent Hood, 4\
- Includes 2 hooker upper protectors, 1 semi-rigid aluminum duct and 1 gasket.
- Duct twists on hooker upper protectors and slides over dryer vent and outlet pipe.
- Protects duct from being smashed behind dryer which can cause unsafe dryer operation and longer drying times.
- No clamps, no tools, no tape. Gasket may be needed for proper fit on some dryers.
HVAC Duct Start Collar, 14\ Round Snap Together Sheet Metal
- Use to start runs of flexible or rigid HVAC ducting.
- Retaining ridge around inlet neck to ensure snug fit to flexible duct.
- Bend every other tab into duct connection, let the rest go outside the duct connection..
Deflecto Semi Rigid Aluminum Duct with Attached Connectors, Silver, 4\ x 24\ (MAC36024/6)
- Semi rigid aluminum duct has a 4” diameter and 24” length.
- Flexible enough for ease of installation, and holds the shape you put it in without sagging.
- Fire-resistant aluminum construction is perfect for gas and electric dryer applications.
- Permanently attached female collar and crimped male end for ease of connection, rotation, and consistent airtight use.
- Durable material holds up during handling and installation.
Deflect-O Aluminum Ducting 3 \ W X 8 ' L
- Aluminum duct for various venting purposes. Has a maximum positive or negative rated pressure of 6"". 8' lengths compress to 28"" to accommodate more space. Meets Class O certification and standards..
- Fire resistant aluminum alloy construction for durability. Operates feasibly at a temperature of -100 - 430 deg F. Non-crimped reduces lint. Weight: 0.5 lbs..
- Dimensions: 8'L x 3"" dia. Semi-rigid but flexible for easy installation. Suitable for multiple uses like dryer, bathroom or kitchen venting..
- Operates at a velocity of 5000 FPM for great performance. Resists fire for longer use. Can be used for exhaust venting bathroom vents, clothes dryers and range hoods..
4\ Inch Round Duct Saddle Take Off - Duct Connector/Adapter / - Duct Transition - with Gasket for HVAC ducting - 90-Degree
- Use to start runs of flexible or rigid HVAC ducting.
- Retaining ridge around inlet neck to ensure snug fit to flexible duct.
- Bend every other tab into duct connection, let the rest go outside the duct connection..
Deflecto Easy Connecting Dryer Vent Hook Up Kit, Flexible Semi-Rigid Aluminum Duct, (HUPK8WA/4) (4 Kits)
- Includes 2 hooker upper protectors, 1 semi-rigid aluminum duct and 1 gasket.
- Duct twists on hooker upper protectors and slides over dryer vent and outlet pipe.
- Protects duct from being smashed behind dryer which can cause unsafe dryer operation and longer drying times.
- No clamps, no tools, no tape. Gasket may be needed for proper fit on some dryers.
10 Inch to 9 Inch Single Wall HVAC Duct Reducer & Increaser - Galvanized Sheet Metal Ducting Connector for Airflow, Heating, Cooling, & Air Ventilation System Extra Strength and Fittings
- D______ ______________ & __________________: Sheet metal HVAC Duct Reducer for flexible or metal HVAC Ducts and air vents. Used to connect two air ducts of different diameters to create a seamless ventilation. Sturdy steel ducting is perfect for DIY and Trade use. Our HVAC Duct Reducer & Increaser Galvanized Metal for Longer Lasting Quality. Galvanized pipe to be used for gas heating, ventilation and air conditioning only. Not to be used for solid fuel venting and Non-Crimped Ends..
- ________-______________ __________ __________: Our sheet metal reducers and increasers are manufactured from the highest quality of galvanized steel. These reducers are made of galvanized sheet metal. Perfect for use with either flexible duct or rigid sheet metal duct. Never be restricted to your air conditioner's ducting requirements again. Single Wall Galvanized Metal reducer for Duct / pipe reducing. Great for professionals and Homeowners. Metal is easy to drill with Self Drilling Screws..
- __________ ________________ ______ ________________: These galvanized duct reducers / Increaser can be used with fans, ducting, air-cooled hoods, and ventilation systems, that allowing you to lengthen and extend your ducting. They are the perfect sheet metal fitting for changing duct s....
Techecook STV-90 Dryer Duct Connector fit 4in Vent Ducting - Dryer Snap to Vent 90 Elbow, Indoor Hook-up Dryer Vent Kit
- ✅【ITEM SPECIALITY & DURABLE】STV-90 Dryer Duct Connector is made to connect a semi rigid or flexible dryer hose with no hose clamps necessary. Our silicone seals give you a sealed dryer connection, making your dryer more efficient and clothes drying faster while consuming less energy and saving on electricity bills. The STV-90 lets you to push your dryer up against your wall without kinking or crushing the hose and losing airflow.
- ✅【PACKAGE INCLUDES】STV-90 Dryer Vent Connector Kit inclueds 1 x dryer vent elbow, 1 x snap connector, 1 x seal ring. The replacement part is made of silicone and other sturdy materials and well-tested by the manufacturer. You can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match.
- ✅【90-DAYS WARRANTY】Risk-free shopping.If the STV-90 Dryer Duct Connector has quality problem or you do not like it, we support return, replacement or refund. We are committed to providing the highest quality products and best prices to create the highest quality life for you. We will try our best to solve the problem. Customer satisfaction is our unremitting pursuit.
- ✅【COMPATIBLE MODEL】The Dryer Vent 90 Connector 5.5 in. L x 6 in. H x 4.25 in.Fit for most brands.This dryer hose connector is made to ....