Top Secondary Air Injection Solenoid Reviews

cciyu AC Compressor A/C Control Solenoid Replace fit for 2013-2017 Nissan Altima

  • COMPATIBILITY - A/C control solenoid fit 2013-2017 Nissan Altima.
  • PRINCIPLE - This item is used to change the air flow of the compressor by closing the automatic opening/closing s of the electromagnetic force, so that the air conditioner can be cooled normally.
  • REPLACEMENT: When the compressor solenoid doesn't blow cold. You should consider that whether there is a failure on your compressor solenoid , you just replace our control solenoid when this happened, your air conditioning will be good.
  • QUALITY - All components are closely inspected and validated to meet the stric quality standards to ensure a long lifetime.
  • NOTICE - If you have any problem or issues, please without any hesitation to contact our after-sale service via email, we will do our best to help you.
Check Stock

3-Way Solenoid Valve 3/8\ with All Fittings (12-Volt)

  • These have an air inlet, an air outlet and an exhaust port..
  • Allow a much greater amount of air to flow through the valve and into your prop. Great for props that need a lot of lift or a quick lift..
  • Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open)..
  • Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion..
  • Has two 3/8" air ports and one 3/8" breather port. Comes with: 3/8" 3-Way Solenoid (2) 3/8" Male Straight fittings with 3/8" push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead.
Check Stock

1\ Bore X 24\ Stroke Double Acting Pneumatic Cylinder (Roughly 1\ Bore 20MM)

  • These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
  • You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
  • Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
  • These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
  • This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..
Check Stock

Hornblasters Katrina 5 Chime Black Train Horn

  • Quality Metal Design - This horn was designed with durability in mind. This horn was made to survive in the toughest climates. Rain, sleet, or snow, the Katrina has got your back..
  • Manifold Design - All five trumpets sit on a specially designed manifold. This manifold routes the air from the inlet to all 5 bells. This horn takes up a decent amount of space however it is very easy to install..
  • Pre-installed Solenoid Valve - This horn features a pre-installed 3/8" solenoid valve with a 1/2" inlet. This horn is ready to accept 1/2" air line directly out of the box. Simply wire one lead of your solenoid to positive, and ground the other lead..
  • 1/2" Air line - The Katrina sounds best when matched with 1/2" air line. We include 10' of 1/2" air line with each Katrina horn. Running 1/2" line with this horn ensures a great honk every time..
Check Stock

1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve

  • .WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position..
  • .2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum)..
  • .Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
  • .This solenoid valve has one G1/4" inch DN8 inlet and one G1/4" inch DN8 outlet port. Valve stays close when the coil is de-energized- and it opens when energized..
  • .1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas..
Check Stock

FZONE 2.5L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator Mini DC Solenid and Diffuser for Aquarium Plants Tanks

  • PROFESSIONAL FULL CO2 DIY KIT! A complete system in 2.5L size bottle, that includes SUS304 stainless bottle, regulator, Mini DC solenoid, precision needle valve, CO2 Tubing, CO2 Diffuser and easy adjustable bubble counter.
  • SAFE! The bottle body is made of 1.5mm thick SUS304 stainless steel (25% thicker than normal 1.2mm bottle). It can sustain pressure up to 80kg/cm2(or 1137 PSI). Safety valve will open automatically when the inside pressure exceeds the safety threshold.
  • NEEDLE VALVE WITH BUBBLE COUNTER! High precision, aquarium specific needle valve provides accurate fine-tuning. Steady 1 bps is achievable. Bubble counter with check valve built-in. It stops water from back flowing into your CO2 tank (protects your CO2 tanks from rust and corrosion).
  • 12V DC SOLENOID INCLUDED! Having the solenoid on a timer, you can specify when you want CO2 injection ON and for how long.
  • ATTENTIONS: Citric acid and sodium bicarbonate NOT included.
Check Stock

Smittybilt 35220 8' Winch Connector Kit

  • Allows you to quickly and easily plug your winch in and go.
  • Perfect for winch owners that need to install their Smittybilt winch on a secondary vehicle, without having to remove the control box, solenoid and other installation components.
  • 8-foot long oxygen-free copper wire copper cable with cover.
  • Quick disconnect manufactured from high impact PVC.
  • Also avail in 24-foot length with on/of switch (#35210).
Check Stock

X AUTOHAUX Car AC Compressor Electronic Control Solenoid Valve PXE13 PXE16 for Audi A3 2007-2014

  • Compatibility: AC Compressor Control Solenoid Valve for Volkswagen Jetta 2005-2014, for Volkswagen Tiguan 2009-2015, for Volkswagen Beetle 2005-2014, for Volkswagen CC 2009-2014, for Volkswagen Golf 2005-2007, for Volkswagen Golf 2010-2013, for Volkswagen Passat 2007-2010, for Volkswagen Passat 2012-2015, for Volkswagen GTI 2006-2014, for Volkswagen Rabbit 2006-2009, for Audi A3 2007-2014.
  • OE Number: Suitable for PXE13, PXE16. Please check the OE number before purchasing the product..
  • Symptoms of a failing factory air conditioner compressor control valve including an air conditioner that does not blow cold air. Replacing the control solenoid valve solves the common problem with AC not blowing cold air..
  • Great cooling efficiency. The control solenoid valve is easy to install and convenient to use..
  • Please check the fitment and OE number before purchasing the product..
Check Stock

Clscea Inline CO2 Bubble Counter with Check Valve for CO2 Generator Regulator Planted Aquarium Aluminum Alloy Silver

  • Inline screw connection, connects to the tubing at both ends, suitable for all CO2 systems..
  • Built-in high-quality check valve to prevent back-siphoning and protect your regulator and solenoid..
  • The bubble counter is designed to accurately monitor air-flow rate, it helps to keep and maintain a healthy aquarium..
  • DURABLE: Both ends are made of aluminum alloy to avoid softening or breaking.
  • The middle transparent cylinder is made of PC (bullet-proof glass), injection molding mode, more robust, safer and more pressure-resistant than acrylic or other materials..
  • It needs to be filled ¾ with water before use. Compatible with 4/6mm (3/16″ inner diameter) CO2 tubing..
Check Stock

Clscea CO2 Bubble Counter with Solenoid Valve and Check Valve for CO2 Generator Regulator Planted Aquarium Screw Connection

  • Screw connection, compatible with many CO2 needle valve. Easy to set up..
  • Integrated with a mini solenoid valve, can still work normally after a short period of water intrusion. 0.8w low power, no worries about electric....
  • Built-in high-quality check valve to prevent back-siphoning. The bubble counter is designed to accurately monitor air-flow rate, it helps to keep and....
  • DURABLE: Both ends are made of metal to avoid softening or breaking.
  • The middle transparent cylinder is made of PC (bullet-proof glass), injection....
  • Quality inspection one by one, rather than random inspection! We are serious about quality control and buyer experience! If there are any questions,....
Check Stock

X AUTOHAUX AC Compressor Control Solenoid Valve VCS14EC DCS17EC AC Air Conditioner Control Valve Replacement for Nissan Altima 2013 2014 2015 2016 2017 2018

  • Applicability: This ac compressor control solenoid valve is suitable for Nissan Altima 2013 2014 2015 2016 2017 2018. Note: but it doesn't fit for Nissan Altima 2.5 S 2015. Please check product size and fitment before order..
  • Function: The ac compressor control solenoid valve is a component that regulates the cooling and heating of the vehicle's central air conditioning. It changes the air flow of the compressor by closing the automatic opening and closing valve of the electromagnetic force so that the air conditioner can be cooled normally..
  • Material: Made of durable metal plastic materials. The product maintains good performance in various environments. It is safe to use and has long service life..
  • Installation: Easy to install, you only need to remove the old compressor solenoid valve in your car and directly replace it with our new compressor solenoid valve. After that, the air conditioner will cool normally and with better cooling efficiency..
  • Package: The package includes 1 x AC Compressor Control Valve VCS14EC DCS17EC. It does not include installation tools. Since this product is only suitable for some cars, please be sure to check whether your car is suitable for this product..
Check Stock

4-Way Solenoid Valve 1/4\ With All Fittings (12-Volt) for Pneumatic Cylinders, Includes 1/4\ push-in air fittings and speed control brass mufflers

  • These have an air inlet, an air outlet and an exhaust port..
  • Allow a much greater amount of air to flow through the valve and into your prop. Great for props that need a lot of lift or a quick lift..
  • Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open)..
  • Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion..
  • Has two 1/4"air ports and one 1/4"breather port. Comes with: 1/4" 4-Way Solenoid (2) 1/4"Male Straight fittings with 1/4"push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead.
Check Stock

ZRDR CO2 Regulator Aquarium 12V DC CO2 Solenoid Pressure Adjustable with Big Dual Gauge Display, Bubble Counter, Check Valve, Aquarium Co2 Kit Fits Standard US Tanks Side and Up Open Cylinder

  • ...ible design and can freely adjust its direction. This aquarium co2 regulator kit is also suitable for side-opening cylinders and cylinders with top-opening bars. This mini series aquarium carbon dioxide regulator have more cost-effective.
  • Waterproof Solenoid Valve – Our co2 solenoid valve adopts the new integrated injection molding technology, which is waterproof and not easy to fall off, effectively prolonging the service life. 12 DC split-type solenoid instead of AC models, more safe and stable. Low power consumption solenoid which low noise and temperature.
  • High Precision Details – Our aquarium co2 kit is a super-suit for the aquarium or your fish tank. High precision fine-tuning easy for CO2 to be 1 bubble in 3 seconds. Bubble counter with check valve function, stop water backflow to co2 tank.
  • Strong Compatibility – The CO2 regulator aquarium is compatible with most brands of high-density tubing to inject your aquarium with CO2 quickly and easily. It also works well with most CO2 atomizers and diffusers and US standard CGA320 CO2 tanks.
  • Durable And Easy To Install – Made of hard aluminum alloy, not easy to rust, Increase usage time. Package with installation instructions and product details instructions, easy to install and use, if you have a....
Check Stock