Top Second hand Reviews

High Torque Quartz Clock Movement Mechanism Replacement Parts with 2 Pairs of Long Spade Hands

• Package and install: the package includes 2 pieces minute hands and 2 pieces hour hands, and the color includes black and gold, easy for installation.
• Simple and elegant design, these replacement parts suit well to different styles of clock frame.
• Clock mechanism size: high torque jump second movement, drive long clock hands (10 mm to 450 mm), total shaft length is 20 mm (0.79 inches), thread length is 11.7 mm (0.46 inches).
• Jump second movement, suitable for 4 to 8 mm (0.16 to 0.31 inches) thickness clock panel.
• Size from the center of the hole to the tip: the golden hour hands is approx. 115 mm/ 4.5 inch and the black hour hands is approx. 154 mm/ 6.1 inches respectively, the golden minute hands is approx. 175 mm/ 7 inches and the black hour hands is approx. 208 mm/ 8.2 inches, 2 caps are approx. 7 mm/ 0.28 inches second cap.
• Wide application: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc..
• Warm notice: when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before purchase, the back of hands color are silver.

SEIKO Rylie Wall Clock, Light Brown

• Simplicity design features a square shape light wooden color case enhanced with zebra wood pattern veneer.
• Easy to fit in a natural modern interior.
• Black numerals, black hand hour and minute hand and a silver color quiet sweep second hand.

Watch Me Go [Explicit]

• Six-hand chronograph function with calendar, gray IP stainless steel case with rotating dial ring to measure elapsed time, and a bold red dial with luminous hands and markers. Flat mineral crystal, screw-back case, gray IP stainless steel bracelet with fold over buckle closure, safety bar and extender, and water resistance to 100 meters..
• 6 Hand, 1/20 Second Chronograph Measures up to 60 Minutes, Calendar, Small Second Hand.

Quartz Clock Movement Mechanism DIY Repair Parts Replacement with 4 Pairs of Short Hands

• Package: the package set is designed with blister cardboard box and instructions, convenient to carry.
• Kindly note that the hand's back color is silver, front color is as shown in picture.
• Movement size: total shaft length is approx. 15 mm/ 3/ 5 inch, thread length is approx. 6.7 mm/ 7/ 25 inch, jump second movement is suitable for 1 to 4 mm/ 1/ 24 to 4/ 25 inches thickness of clock panel.
• Hole center to the tip hand size: hour hands are approx. 33 mm/ 1.3 inches, 41 mm/ 1.6 inches, 36 mm/ 1.4 inches and 37 mm/ 1.5 inches respectively, minute hands are approx. 44 mm/ 1.7 inches, 51 mm/ 2.0 inches, 50 mm/ 2.0 inches and 52 mm/ 2.0 inches, 3 second hands are approx. 49 mm/ 1.9 inches, 55 mm/ 2.2 inches and 55 mm/ 2.2 inches, 1 second cap is approx. 7 mm/ 0.28 inches.
• Easy to install: the clock movements kits is easy to install, because of simple and elegant design, these replacement parts suit well to different styles of clock frame.
• Aluminum material: the clock hands are made of quality aluminum, lightweight and corrosion resistant, exquisite and durable for a long time.

Quartex

• ♥High torque movement: long spindle quartz clock replacement movement parts with metal hook and 3 different pairs of hands(2 black and 1 white),....
• ♥ Size: total shaft length is 13 mm (1/2 inches), thread length is 6 mm (1/4 inches).
• Sweep second movement, suitable for 1 -4 mm (1/ 25 - 5/32....
• ♥ Three of most popular clock hands. Different Size,Color and Styles. Meet different needs only in one package. The Diameter of Clock Panel should....
• ♥ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY....
• ♥ Package contents: a clock movement,a metal hook,3 Second hands,3 Minute hands,3 Hour hands,3 Plastic washers,3 Brass washers and 3 Brass nuts,come....

Breitling Men s A1334011/B683 Superocean Chronograph Watch

• From the Classic Collection. New Wilton style with six-hand chronograph function. Rose gold-tone stainless steel case with applied Roman markers,....
• 6 Hand, 1/20 Second Chronograph Measures up to 60 Minutes, Calendar, Small Second Hand.
• 30M Water Resistant and 3 Year Limited Warranty.

Quartz Pendulum Clock Movement Mechanism DIY Repair Parts Replacement with 2 Pairs Hands and Pendulum for DIY Clock Repair

• What you receive: pendulum clock movement set comes with 2 pairs of hands, pendulum, and instructions, the whole set is convenient for you to replace and repair, easy to install.
• Pendulum clock mechanism: approx. 23 mm/ 9/10 inch in total shaft length, 15.4 mm/ 3/5 inch in thread length.
• Jump second movement, suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel.
• Hole center to the tip hand size: the hour hands measure approx. 80 mm/ 3.1 inch and 59 mm/ 2.3 inches respectively, minute hands are approx. 110 mm/ 4.3 inches and 86 mm/ 3.4 inches, the second hand is approx. 100 mm/ 3.9 inches, second caps is approx. 7 mm/ 0.28 inches.
• Please note that as the clock hands material are aluminum, the hands back color are silver, front color as the picture show.
• Where to use: these clock pendulum movement sets can be applied for cross-stitch, 3-dimensional embroidery, craft clock, frameless draw clock, etc., bring much convenience to you.
• For DIY: these pendulum clock movements feature simple and elegant design, these replacement parts suit well to different styles of clock frame, nice tools for DIY design, have the clock designed and made by yourself.

Quartz Pendulum Trigger Clock Movement Chime Westminster Melody Mechanism Clock Kit with 3 Pairs of Hands

• What you get: in our pendulum clock movement set, you will receive 3 pairs of hands, pendulum, trigger clock movement, chime music box, mounting hardware and instructions, meet your different needs and replacement.
• Pendulum clock movement size: total shaft length is 17 mm/ 0.67 inch, the thread length is 9.7 mm/ 0.38 inches.
• Jump second movement, which is suitable for 2-6 mm/ 0.08-0.24 inches thickness clock panel.
• Hole center to the tip hand size: the hour hands measure approx. 70.5 mm/ 2.78 inch, 70 mm/ 2.76 inch and 82 mm/ 3.2 inch, the minute hands measure approx. 101 mm/ 3.98 inch, 92 mm/ 3.6 inch and 117 mm/ 4.6 inch, and 2 second hand are approx. 100 mm/ 3.9 inch, 1 second cap is approx. 7 mm/ 0.28 inch.
• Melody effect: the chiming pendulum movement plays the Westminster melody on the hour, automatically silences the chimes after 9 o'clock pm until 6 o'clock am.
• Practical tools for you: these pendulum trigger clock movement replacement parts are practical for you to design and make your own pendulum clock, help you to replace and change a different look.
• Please notice that the hands are made of aluminum, don't install them with too much pressure or they will be bent.

Bjerg Instruments 5 Pack Bulk Clock Parts with Replacement Movement Mechanism and Hands for 14 to 16 inch Clock (Modern)

• 5 Pack of movements and hands is great for clock makers. Hands are suitable for a 14-16 inch clock diameter, and possibly other sizes. Check hand measurements listed below and decide if it fits your clock design!.
• Hour Hand: Full length: 4-3/4 inches, Minute Hand: Full length 7-1/2 inches.
• Second hand: Full length 6-1/2 inches and from center to end 4-1/4 inches.
• Silent sweep second hand means NO ticking noises. This is a quiet clock mechanism..
• Quartz clock motor and traditional style hands kits with battery operated movements. Battery not included..

Casio G-Shock Blue Dial Resin Quartz Men s Watch GST200CP-2A

• Mineral Glass, Neobrite, Shock Resistant, 200-meter water resistance, Case / bezel material: Resin / Stainless steel Resin Band.
• LED light (Super Illuminator), World time, 1/100-second stopwatch, Countdown timer.
• 5 daily alarms (with 1 snooze alarm), Hourly time signal, Full auto-calendar (to year 2099), 12/24-hour format, Button operation tone on/off.
• Regular timekeeping , Analog: 3 hands (hour, minute (hand moves every 10 seconds), second) Digital: Hour, minute, second, pm, month, date, day,....
• Approx. battery life: 2 years on SR927W × 2, Size of case: 59.1 × 52.4 × 16.1 mm , Total weight: 100 g , LED:White.

Bulova Men's Quartz Dress Watch with Stainless Steel Strap, Gray, 22 (Model: 98B350)

• Six-hand chronograph function with calendar, gray IP stainless steel case with rotating dial ring to measure elapsed time, and a bold red dial with luminous hands and markers. Flat mineral crystal, screw-back case, gray IP stainless steel bracelet with fold over buckle closure, safety bar and extender, and water resistance to 100 meters..
• 6 Hand, 1/20 Second Chronograph Measures up to 60 Minutes, Calendar, Small Second Hand.

Clock Motor Movement Wall Clock Movement Mechanism DIY Repair Parts Replacement with 3 Different Pairs of Hands (Shaft Length 0.9 Inch/ 23 mm, Black Red)

• Features: long spindle quartz clock replacement movement parts with metal hook and 3 different pairs of hands, good for repairing, replacing or making a clock by yourself, these replacement parts suit well to different styles of clock frame.
• Size: total shaft length is 23 mm (0.9 inches), thread length is 14.6 mm (0.57 inches).
• Jump second movement, suitable for 9 - 13 mm (0.35 - 0.51 inches) thickness clock panel.
• Hole center to the tip hand size: the hour hands are approx. 70.5 mm/ 2.78 inch, 70 mm/ 2.76 inches and 82 mm/ 3.2 inches respectively, minute hands are approx. 101 mm/ 3.98 inches, 92 mm/ 3.6 inches and 117 mm/ 4.6 inches, 2 second hands are approx. 100 mm/ 3.9 inches, 1 second caps is approx. 7 mm/ 0.28 inches.
• Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc..
• Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.

Equity by La Crosse 20801 11\ Brushed Titanium Analog Wall Clock