Scepter 10506 Under Seat Portable Fuel Tank - 3 Gallon
- Seamless one-piece polyethylene construction.
- Molded feet provide superior ventilation.
- Accepts standard 1/4 NPT marine tank fittings.
Top Seamless Fittings Reviews
SUPERFASTRACING 10 Gallon Aluminum Fuel Cell Gas Tank with Level Sender Kit
- Seamless one-piece polyethylene construction.
- Accepts Standard 1/4 npt marine tank fittings.
- Meets all epa/carb emissions requirements.
Scepter OEM Portable Fuel Tank
- Seamless one-piece polyethylene construction.
- Molded feet provide superior ventilation.
- Accepts standard 1/4 NPT marine tank fittings.
Gamma Ez Dri Soft Unit, Silver/Black
- Features an all-steel powder-coated handle and frame, the most durable in the industry..
- The reinforced frame and end fittings eliminate wobble for easy operation and quick water removal..
- The powder coated handle features a hang hook for easy storage and drying..
- Features a 3/4" polyurethane seamless foam roller with a PVC core..
- 36" wide, 3/4" thick roller, 54" long handle..
A.A 30 Gallon RV Fresh/Gray Water Tank 34\ x 18\ x 12\ - BPA Free (30 Gallon)
- This 30 gallon water tank measures 34" x 18" x 12" (not including fittings).
- All tanks come with (1) 1.25" water fill inlet and (3) 3/8" NPT connections. Non-Pressurized Tank - The tank must be vented.
- One piece seamless construction - No Seams to burst.
- These rotational molded fresh water tanks are made from a high quality durable polyethylene material..
- Stain, corrosion and rust resistant features make them ideal for replacement or OEM installation on RVs, horse trailers or marine products..
A.A 16 Gallon RV Fresh/Gray Water Tank 24' x 15' x 10' BPA Free (16 Gallon)
- This 16 gallon water tank measures 24" x 15" x 10" (not including fittings).
- These rotational molded fresh water tanks are made from a high quality durable polyethylene material..
- One piece seamless construction - No Seams to burst.
- All tanks come with (1) 1.25" water fill inlet and (3) 3/8" NPT connections. Non-Pressurized Tank - The tank must be vented.
- Stain, corrosion and rust resistant features make them ideal for replacement or OEM installation on RVs, horse trailers or marine products..
SUNGATOR 3/4 Inch Check Valve No Lead Brass Push to Connect Plumbing Fittings to Connect PEX Copper CPVC PE-RT With A Disconnect Clip Pack of 6
- 【APPROVED TO USE】: Certified and listed to ASSE 1061, NSF/ANSI 61.
- Meet UPC, CUPC requirements. Lead Free brass is safe for drinking water and hydronic heating water distribution..
- 【EASY INSTALLATION】: Complete installs faster and safer than traditional methods with brass push-to-connect fittings and ease of use reduces installation errors as they completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms.
- Just push and lock the pipe to get the seamless performance..
- 【VERSATILE APPLICATIONS】: Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, they are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe..
- 【LONG LASTING】: Made of high-quality brass that is an abrasion resistant material for use in prevention and protection of fittings against corrosion, scratches, dulling and other damage after use. It is a perfect material for pipe fitting system as it can withstand rated up to 200 °F and 200 PSI and long period of wear and tear..
- 【BUNDLE INCLUDES】: 3/4 Inch Check Valve (6 PCS).
MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")
- Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
- Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
- Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
- Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2
- Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
- Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
- Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
- Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Bimini Top 3-Bow/4-Bow Stainless Steel Boat Jaw Slide Cap Eye End Deck Hinge Fittings Hardware 16 Set 1 Inch
- 4 BOW and 1'', Round Tube Bimini Top Kit with Stainless Steel Fittings.
- 8 x Eye End Fittings - Fit 1"； 6 x Jaw Slide Fittings - Fit 1''； 2 x Deck Hinge Fittings.
- Package : 16 Pieces in 1 Set, (WHAT YOU GET:8 x Eye End Fittings - Fit 1"； 6 x Jaw Slide Fittings - Fit 1''； 2 x Deck Hinge Fittings).
ABN Grease Fitting Tool - 4 Way Grease Fittings Tool Easy Out Zerk Fitting Tool for Damaged Grease Zerks and Fittings
- SERVICE YOUR VEHICLE: Use the ABN 4-Way Grease Fitting Kit to install, remove, repair, and maintain zerk fittings in your vehicle, lawnmower, and other tools that use grease fittings.
- This grease zerk tool kit even helps you remove damaged or broken grease fitting tabs.
- 4 TOOLS IN ONE: Re-tap holes, install and remove fittings, and remove broken fittings with this four in one grease fitting removal tool.
- Slotted grease fitting installation tool works with any straight, pin-type, or angled zerk including 30, 45, 65, and 90-degree angles.
- FITS YOUR ZERK GREASE FITTINGS: Grease nozzle fitting greasing tool is suitable for 1/4 inch-28 and 6MM fittings, 1/4"-28 tap thread repairs, and 5/16-inch (7mm) and 3/8-inch (9mm) hex fitting and plug removals.
- BUILT TO LAST: Constructed of heavy-duty metal ensures maximum strength and longevity.
- 2-inch (5.1cm) T-design and a knurled body provides secure grip so you can install, rethread, or remove fittings easily.
- EASY TO USE: Air grease gun accessories designed to clean out the threads of clogged fittings.
- Grease zerk extractor grease fitting multi-tool features a built-in re-threader and extractor to help you remove worn and broken zerks and fittings.
MX Bimini Top Fitting Hardware Set Fit 7/8',Boat Jaw Slide,Cap Eye End,Deck Hinge(6pcs)
- Bimini Top Fittings Hardware Set Black Nylon 6 PCS.
- 7/8 inch tube bimini top fittings hardwares set.
- Bimini fittings set included: 2 pcs nylon eye end cap fittings, 2 pcs nylon jaw slide fittings, 2 pcs nylon deck hinge fittings with screws..
- Bimini top hardware made of durable black nylon.
- The bimini top fitting kit easy to install,very convenient.
TIRDITY 3/4\ Pipe Fittings - 24 Pack 3/4 Inch Black Floor Flange Elbow Tee Combo | Malleable Cast Iron Vintage Furniture Grade Threaded Pipes for DIY Industrial Shelves, Pipe Shelving, Steampunk Decor
- 【 3/4" INCH ELBOW TEE COMBO PACK 】Our industrial pipe fittings 3/4 malleable iron threaded elbow/tee combo/pipe flange pack provides you the great floor flange pipe fittings at a reasonable price. Malleable cast iron pipe fittings can decorate your home or store more elegant and functional..
- 【 PIPE INDUSTRIAL DECOR 】You can use these black malleable pipe fittings to install durable iron frame for your pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, wall lamp or other industrial home decors. When you prefer an industrial, steampunk, vintage, retro, factory look, our decorative black pipe fittings are the way to go. Threaded pipe fittings are built to fit your household with an industrial, rustic style. Our black steel pipe fittings will definitely satisfy you..
- 【 EASY TO INSTALL 】These metal cast pipe fittings are threaded, just screw the threaded rods or pipes to the tees and elbows and they will hold forever. No screws needed to install steampunk pipe fittings. Easy to install, no DIY difficulties to connect Pipe furniture fittings. You will love black iron pipe connectors..
- 【 MATERIAL OF RAW IRON 】Since threaded metal pipes are unprocessed cast iron parts, we strongly recommend you to clean and seal each part of bl....