Top Seahawk Inflatable Boat Reviews

Intex Seahawk 4 Inflatable 4 Person Boat Raft Set with Oars & Air Pump (5 Pack)

The Seahawk 4 inflatable boat is perfect for four adults to enjoy a fun summer of boating, fishing, or relaxing on the water.
Designed with heavy duty, puncture resistant PVC for comfort and durability.
3 air chambers including an inner auxiliary chamber inside the main hull for extra safety.

Check Stock

Intex Seahawk 3 Inflatable raft Set and 2 Transom Mount 8 Speed Trolling Motors

Intex Seahawk 3-Person Inflatable Boat Set.
Perfect for fishing, relaxing, or rowing on the lake.
Heavy-duty construction features durable PVC, an I-beam floor, and 3 air chambers.
Can carry up to 3 people (and up to 790 pounds).
High output pump allows for fast and easy inflation and deflation from the 2 attached Boston valves.

Check Stock

Intex Motor Mount Kit for Intex Inflatable Boats

Fishing and relaxing have never been easier with the 2 built-in fishing rod holders and gear pouch.
A grab handle on the bow and an all-around grab line are provided for your convenience, as well as welded oar locks, and oar holders.
Comes with 2, 48-inch French oars and a high-output pump for easy inflation and deflation.
Motor mount fittings are included for the flexibility of adding the Intex motor bracket and trolling motor.

Check Stock

Intex Transom Mount Trolling Boat Motor

Designed for Intex boats, includes Challenger 3, Seahawk 2, 3, 4, Excursion 3, 4, 5 and Mariner 3 and 4. Compatible with most inflatable boats that....
Control panel: Battery meter, automatic escape weed control key, dry operation protect, overload protect controls..
Adjustable handle: Handle tilts upward: 45, 30, 15, 0 degrees . Handle tilts downward: 0 – 75 degrees. Handles extends 6 inches (15cm). Handle speed....
Maximum Power (W): 420W. Voltage: 12V DC. Thrust: 40 lbs/180N. Shaft length in inches: 36 (91.40cm). Suitable for: Freshwater and saltwater..
Requires (not included): A deep cycle marine 12 volt battery with at least 60 ampere hours rating..

Check Stock

Inflatable Boat Air Valve,2PCS Inflatable Boat Spiral Air Plugs One-Way Inflation Replacement Screw for Inflatable Boat

【High Quality】 The inflatable marine valve is made of high-quality, high-density ABS plastic, which is strong, corrosion-resistant and durable. Please allow a slight deviation for measurement. It is not a general-purpose type. Please check your required size..
【One-way Inflation】This valve is a one-way inflation valve, suitable for rapid inflation..
【Anti-leakage Design】The marine valve has a perfect design, and the valve cover ensures air leakage..
【Fine Design】The fine design of durable air valve with a valve cap ensures anti-leak inflation.The diameter/length of Threaded part is 20mm / 16mm .Please check size to make sure whether your valve bung fit this plug before purchase..
【Good Component】Inflatable Boat Valve comes in pair, the Inflatable Tube is a good replacement accessory for your inflatable boat.After inflation of your inflatable product by the valve, DO NOT use the product immediately! Leave your inflatable product inflated for 2 hours at least, to test if there is any tiny air leakage. especially for inflatable boats..
【Widely Application】Our inflatable boat air valve replacement spiral air plugs fits most inflatable boat, raft, rubber dinghy, etc.But not suit for netted ship .Putting an alternate inflatable boat valv....

Check Stock

Seamax Inflatable Boat Cover C Series for Beam Range 5.3 to 5.7 FEET 5 Sizes fits Length 9.9 to 13.8 FEET C330 - Max Length 10.8ft

C SERIES INFLATABLE BOAT COVER - fits Beam between 5.3ft to 5.7ft. There are 5 models in C series: C300 fits Max Length 9.9ft boat.
MODEL CHECK LIST - If you have an Achilles, Mercury, Seamax or Zodiac inflatable boat, you can find your boat cover model from below Check List.....
MOTOR WELL STYLE & TRAILERABLE - Our boat cover should be able to cover your boat and the motor. Fabric Specs - Water and UV resistant.
FULL SUPPORT - Seamax inflatable boat covers have 6 series and overall 25 models. Our boat covers can fit the inflatable boats from 6.5ft to 20ft.....
If you pick a wrong size boat cover, that is no problem, we have our Express Replacement service to help you out from this issue. You can let us know....

Check Stock

Keenso Inflatable Gauge Boat, 0-5.08 PSI Air Pressure Gauge Fishing Inflatable Boat Barometer Inflatable Boat Parts for Inflatable Boat/Kayak/Surfboard/SUPBoard Raft (Black)

【Solid & Corrosion-resistant】-- The Inflatable Gauge Boat was made of good quality PVC material, solid, durable and corrosion-resistant..
【Abrasion-resistant Silica】-- The air pressure gauge fishing inflatable boat adopts external silica gel to resist abrasions for long time use.Pressure gauge showing up to 0.6bar or 8.55 psi..
【For Water Activities】-- The Inflatable Boat Air Pressure Indicator is designed to help ensure that inflatable kayaks, boats, surfboard, inflatable boat with safe and correct pressure..
【Multiple Usages】-- The Inflatable Gauge Boat for valves and pump hoses. It can be used alone or connected to the air pump to monitor air pressure when inflating..
【Specifications】-- Material: PVC + Silica Gel, Color: Black, Measuring Range: 0-5 PSI, Gauge Diameter: Approx. 3.8 cm/ 1.50 inch, Valve Diameter: Approx. 1.96 cm/ 0.77 inch, Weight: Approx. 80 g.

Check Stock

ShoreLand'r 68038 Chrome Lug Nuts Used for Alum

Durable Stainless Steel: Our inflatable boat launch wheels arms are made of durable stainless steel with CNC processing, which will hold up even under the most extreme conditions. And the frame arms with anodized coating have features of superior durability and long service life..
Large Load Capacity: The boat launching wheels are designed to enable one people launching of an inflatable boat. The weight capacity of the 15"/38.1 cm boat transom launching wheel reaches 300 Lbs/136 kg, making the towing boat a breeze on different road surfaces..
Strong Inner Tubes: We thickened the tubes that can holder more heavy boat/yacht, and you don't worry about tubes exploding.
Simple Installation: The dinghy transom launching wheels set is easy to operate, saving much time. You need to follow the steps in the picture, and it can be disassembled effortlessly. In addition, the wheel arms kit is small and space-saving..
Extensive Application: The inflatable boat transom launching wheel is widely applicable to most boats with a transom, such as Jon boats, dinghy, inflatable boats, mud boats, rowboats, sailing dinghies, etc. The wheels are suitable for grass, hard or soft sand, and dirt..

Check Stock

Alomejor Inflatable Boat Air Valve Screw 2pcs Valve Air Valve Replacement for Inflatable Boat Jilong Fishing Boat Airbed Raft

?ONE-WAY INFLATION VALVE?The inflatable boat air valve is a one-way inflation valve, good for quick inflation. It is sturdy, anti-corrosion and durable..
?INSURES ANTI-LEAK INFLATION?Inflatable boat air valve screw adopts the fine design with a valvecover ensures anti-leak inflation..
?EASY TO FIT?The boat air plug is good replacement accessory for your inflatable boat. Easy to fit, good performance and long serve life..
?WIDE APPLICATION?Air valve replacement is applicable for inflatable boats, kayak, airbed, canoe, pool raft, rubber dinghy, etc..
?STURDY, ANTI-CORROSION?This air valvecover screw is sturdy, anti-corrosion and durable. Sturdy, anti-corrosion and durable..

Check Stock

Inflatable Sport Boats Aluminum Bench Seat with Slide Attachments (85)

One Slide on Bench Seat. 85 CM seat works with 5' wide dinghies FITS: Inflatable Sport Boat model: SB-300, SB-270, SB-270A. 95 cm seat works with 5.3' wide dinghies FITS: Inflatable Sport Boat models: SB-330, SB-330A..
Aluminum dinghy bench seat ONLY. Does not come with PVC slide rails on inflatable..
Plastic sliders on the bottom of each seat for attaching to inflatable boat..
2 sizes: 85 cm long bench seat and 95 cm long bench seat. Bench seat width: 7.5".
These slide on bench seats can be used on Inflatable Sport Boats. All Inflatable Sport Boats have the spots for 2 bench seats. These bench seats slide on and can be adjusted one foot forward or backwards. Giving the captain the decision to adjust or remove seats easily..

Check Stock

Xximuim Inflatable Boat Air Valve,2PCS Inflatable Boat Replacement Caps Boat Spiral Air Plugs 0ne-Way Inflation Replacement for Inflatable Raft Boat Kayak

【High Quality】 The inflatable marine valve is made of high-quality, high-density ABS plastic, which is strong, corrosion-resistant and durable..
【One-way Inflation】This valve is a one-way inflation valve, suitable for rapid inflation.The valve cover ensures air leakage..
【Design】The fine design of durable air valve with a valve cap ensures anti-leak inflation.The diameter/length of Threaded part is 20mm / 17mm....
【Good Component】Inflatable Boat Valve comes in pair, the Inflatable Tube is a good replacement accessory for your inflatable boat.After inflation....
【Widely Application】Our inflatable boat air valve replacement spiral air plugs fits most inflatable boat, raft, rubber dinghy, etc.But not suit....

Check Stock

Pressure Gauge 30PSI Air Pressure Gauge Measurement Durable Inflatable Boat Barometer PVC Barometer for Outdoor Sports Rowing,Kayaking Surfing Rowing

Made of high quality PVC material, sturdy and durable, suitable for inflatable boat, rubber boat, support plate, etc..
Check air pressure drop changes at any time to identify potential problems in the rubber boat, easy to install and operate..
Suitable for sports: outdoor projects, rafting, water skiing, surfing..

Check Stock

Inflatable Boat Set 2-3 Person Thickened Fishing Boat Hard Inner Bottom Floor Boat with 3 Separate Air Chambers

Size: This inflatable boat can carry up to 2 adults and 1 child, rowing by one person. As a fishing boat, it is suitable for one person. MAX LOAD:700 lbs(The hull maxload:518 LBS + The inflatable bottom plate maxload:187 LBS)，Outside dimension：90‘’*50‘’，Inside dimension:63‘’*23‘’,Total weight:about 41 pound,Fishing have never been easier with the 2 built-in fishing rod holders.
SAFETY:Three separate air chambers, two on the hull and one on the bottom,if one of them is damaged,the other air chamber will not be affected,even if only one chamber is intact,it can still reach the shore safely..
MATERIAL：0.7mm thickened PVC clamping net material hull, strong and durable, not easy to deformation，The bottom plate added nylon wire，After inflating it, its hardness is close to that of the board，It is more stable when standing inside the boat, and the bottom plate also serves as a separate air chamber to provide additional buoyancy，If the inflatable boat breaks and leaks air,It can still stay afloat，One more layer of security for life..
In order to facilitate packaging folding, the air plug is in defla....

Check Stock