Top Sd To Ide Reviews

SD SDHC SDXC MMC to 3.5' 40Pin Male IDE Adapter Card SD Memory Card to IDE Hard Disk Drive Adapter

SD to 3.5" 40Pin IDE Adapter,Convert SD, SDHC, MMC to an IDE-compatible hard drive.Support PIO, multi-word DMA and super DMA data transmission mode. high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error.Ideal for some devices that required a fast and easy bootable device such as POS..
Enables IT engineers and embedded technology enthusiasts to use SD/MMC card as a normal IDE 3.5" hard disk.Provides an alternative for data storage and transfer or test for mainboard, sound card, display card and memory card, etc..
Compatible with SD Memory Card specification 1.1, MMC specification 2.0, SDHC Memory Card. SD socket support maximum 32GB SDHC card Support PIO, Multi-Word DMA and Ultra DMA data transfer mode. Compatible with DOS, Windows 98SE, Me, 2000, XP and Vista & Linux. Bootable, install OS and application on SD card..
Easy installation and no driver required.Mini board design and no space wasted. Ompatible with MMC system specification 2.0 , SD Memory Card specification 1.0, SDHC Memory Card..
Attention: Some of the mother board required to enable LBA mode and disable DMA transfer mode..

Check Stock

GODSHARK SD Card to 2.5 Inch IDE Adapter, SDHC SDXC MMC Memory Card Converter to Laptop HDD 44 Pin Male PATA Port

Adapt SD/MMC flash memory card to a super compact, cost efficient, anti-shock, low power consumption, no acoustic noise and fast access time HDD.
Enables SD/MMC card as a normal IDE 2.5" hard disk.
Provides an alternative for data storage and transfer or test for motherboard, sound/audio/memory card, etc..
Ideal for some devices that required a fast and easy bootable device such as POS. Be a SD/MMC card reader/writer.Compatible with SD, SDHC, SDXC & MMC specification.One 2.5" IDE hard disk driver 44pin male connector and one standard SD socket..
Supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted.Dimensions: 36mm x 52mm.Attention: This adapter does not support hot-swap of CF cards, so please turn off power when changing cards..

Check Stock

Nikon D200 Digital Camera Memory Card 32GB CompactFlash Memory Card

1. Need cf type ii slot. Supports sd/sdhc/sdxc all capacities..
2. The eye-fi card will not work in canon 20d, 30d and 40d cameras when used with sd/mmc to cf adapter..
3. A wifi sd card is required for wifi connectivity!.
5. Supports cf true ide mode / memory mode / io mode..

Check Stock

Tccmebius TCC-S865 USB 3.0 to SATA IDE Dual Slots External Transparent Hard Drive Docking Station with Card Reader and 2 Ports USB 3.0 Hub for 2.5 3.5 Inch IDE SATA I/II/III HDD SSD

Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
Data transfer: Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard disk to your computer via USB 3.0 port, USB 3.0 data transfer rate up to 5 Gbps. Integrated card reader (TF card / SD card), at the same time card reader can read only one memory card, up to 64GB..
Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..

Check Stock

Hard Drive Docking Station, Tccmebius TCC-S862-US USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External Enclosure with All in 1 Card Reader and USB 2.0 Hub for 2.5\ 3.5\ IDE SATA I/II/III HDD SSD

Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
Data transfer: Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard disk to your computer via USB 2.0 port, USB 2.0 data transfer rate up to 480MB / s. Integrated all-in-1 card reader (XD card / TF card / MS (Duo / Pro) card / CF card / SD card), at the same time card reader can read only one memory card, up to 64GB..
One-Touch Backup: One-Touch functionality makes it easy to copy data and documents from your computer to an external hard drive. For information on using the OTB feature and downloading the OTB software, please refer to the product guide. Note: OTB software cannot be installed on macOS and IOS systems..
Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT ....

Check Stock

FYSETC Display Screen SD-W-I-F-I with Card-Reader Direct BTT Wireless Cloud Transmission Module for Prus MK3S TFT35 V3.0 Ender 3 SKR Mini E3 3D Printer

Wireless transmission: a W-i-f-i-SD card adapter, Only supports 2.4G network, make sure the adapter and PC/Mac terminal connecting to the Same Network. Please note:Comes with a 8G card( detail user guides) in the package, not for using.Install is a little complicated, please reference the more information and other customers voice..
Usage: Make sure have a CH340 USB driver(search: FYSETC/CH340-Driver on Github) and a Arduino IDE software/Pronterface (Pronterface forces all caps, not good if SSID/PW has lowercase). Please refer to the product description at bottom for more details. Note: *Adjust the baud rate to 115200*on Arduino..
Based on ESP8266's low-power UART-W-I-F-I chip module. About the firmware. please search Github:FYSETC/ESPWebDAV..
Features: Maximum support 32GB of SD card.
The adapter uses a DHCP connection, please map its address as static in your DHCP server. Has the ability to operate in 802.11 B/G/or N modes. It is set to the "N" mode by default. To change modes requires modifying the firmware and re-flashing the device using the free Arduino IDE software..
Suitable for 24V 3D printer, such as Prusa MK3S,TFT35 V3.0, Ender 3,SKR Mini E3 V1.2 V2 etc. Need more help please email us, we will give you help within 24 hours..

Check Stock

KOOBOOK 1Pcs SD SDHC Card to IDE 3.5' 40Pin Male Adapter Male IDE Hard Disk Drive Adapter

Converts Secure Digital Card into IDE compatible hard drives..
Compact Design4-pin computer power supply connector..
Bootable solution for PC.You can install the OS onto the SD Card..
The data transfer rate is high and the speed is almost the same as that of the system hard disk (ATA/133, U-DMA mode3)..
Compatible with MMC system specification 2.0 , SD Memory Card specification 1.0, SDHC Memory Card.Compatible with DOS, Linux, Windows 98SE, Me, 2000, XP and Vista..

Check Stock

StarTech.com 3.5in Drive Bay IDE to Single CF SSD Adapter Card Reader 35BAYCF2IDE

Connect a CF card to a computer through an IDE connector.
Compatible with compact flash memory cards and desktop computers with an IDE slot.
Compact flash IDE adapter / CF to IDE adapter / CF to IDE converter / IDE to CF card reader.
Quick and driver free installation into any IDE 40 pin and 44 pin slot.

Check Stock

USECL 2.5 Inch IDE to SATA Adapter,44 pin IDE HDD Laptop Hard Drive Female to 7+15 pin Male SATA Adapter,Convert Laptop IDE Hard Drive to SATA Port.

This is 22 Pin male SATA connector and 44-Pin standard female IDE connector adapter..
IDE to SATA Adapter. The 44-Pin IDE 2.5" HDD to SATA Adapter can allow you use your laptop 2.5" IDE hard disk as SATA disk. You can use your 2.5" IDE....
IDE SATA convert Adapter for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD..
Great for computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives..
Dimensions: 2.72" x 0.55" x 0.69".ide to sata hard disk adapter Lightweight and easy to carry.easy to install ..

Check Stock

Abuycs SD CF Extreme Card Adapter Wireless WiFi SD MMC SDHC SDXC Slot to CF Type I Compact Flash Memory CF Card Adapter Reader Writer High Speed for SLR Camera

Support: SD SDHC SDXC MMC,Interface: CF Card Type I..
Support System:Windows 2000/XP/VISTA/MAC 10.4 above..
Support SD3.0 and Windows exFAT file system..
Supports I/O mode memory mode and IDE mode..

Check Stock

Xiwai Low Profile Half-Heigh mSATA SSD to 2.5 inch IDE 44pin Hard Disk Case Enclosure for Notebook Laptop

IDE to SATA Adapter. One Male SATA 7+15pin port convert to 2.5 inch Female PATA port (44-pin IDE) Adapter.
The product for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD..
Adapter 44-Pin IDE 2.5" HDD to SATA Adapter can allow you use your laptop 2.5" IDE hard disk as SATA disk. You can use your 2.5" IDE hard disk in the laptop or desktop which have SATA connector..
Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives. Improve the use of IDE hard disk..
Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux. Dimensions: 2.72" x 0.55" x 0.69"..

Check Stock

LWS 2.5 Inch IDE to SATA Adapter Convert Laptop 44 Pin Male IDE PATA HDD Hard Disk Drive SSD to a Serial ATA Port 。

IDE to SATA Adapter. One Male SATA 7+15pin port convert to 2.5 inch Female PATA port (44-pin IDE) Adapter.
The product for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD..
Adapter 44-Pin IDE 2.5" HDD to SATA Adapter can allow you use your laptop 2.5" IDE hard disk as SATA disk. You can use your 2.5" IDE hard disk in the....
Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives. Improve the use of IDE hard disk..
Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux. Dimensions: 2.72" x 0.55" x 0.69"..

Check Stock

KEYESTUDIO W5500 Ethernet Control Board for Arduino, Microcontroller+Ethernet/Micro SD Shield+microUSB(Without POE)

This is a control board with built-in Ethernet function, like a hybrid of an Arduino Uno R3 and an Ethernet/micro sd shield..
MAC addresses are not unique, you can set MAC address in the code. It comes with a microUSB port instead of the standard Arduino one..
TF card can’t be connected to control board when reading IP address code, otherwise, IP address might be not read Code..
The SD card slot is push release and sturdy. The ethernet port extends beyond the PCB which is nice for panel mounting in a project box..
Search for "keyestudio wiki KS0304" in Google Chrome to get the online tutorial. Note that the code and libraries we provide are based on the 1.0.4 version of IDE, they may not be compatible with other versions..

Check Stock