Top Scsi Card Adapters Reviews

Micro SATA Cables SCSI HPDB 68 Female to IDC 50 Female F/F Adapter Converter 68 Pin to 50 Pin

SCSI 2 devices typically use the HPDB50 connector while the wider HPDB68 connector is used for SCSI 3 connections.
You can connect your SCSI 2 and SCSI 3 devices together using this adapter from Monoprice! This adapter features a female HPDB68 connector for connecting to SCSI 3 devices and a male HPDB50 connector for connecting to SCSI 2 devices.
The male end includes side clip release latches and side clips for securing the adapter to a panel connector while the female end includes nuts for securing to a line connector.

SCSI or SUN workstation Cable with Centronics 50 Male to DB50 Male Connectors.
This SCSI RS232 cable connects SCSI to SCSI Devices or SCSI systems to SCSI Devices with a Centronics 50-pin or CN50 Male to Male..

...CSI controller card in a computer system and direct attached storage devices with a SATA connector.
Leverage hardware raid performance with this SATA multi-lane cable.
Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters.
Supports up to 6Gbs data transfer rate per drive.
DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management.
Slim ribbon cables minimize airflow impact in a computer case.
Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity.
Woven mesh sheath covers half of the cable for easy routing.
P1 to P4 markers provide easy ID after installation.
Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection.

HIGH QUALITY SCSI CABLE: Our SCSI II cables allow for dependable, high-speed pairing between your computer’s motherboard and a variety of peripheral devices. SCSI II cables, also known as “wide SCSI cables”, are designed to connect older peripherals such as printers and hard drives with newer controllers that surpass SCSI I standards. The connectors are HPDB50 male on both ends..
HIGH QUALITY COMPONENTS: SCSI II cables are smaller than traditional SCSI cables and offer quicker transfer rates, more secure connections, wider bus paths, and better all-around reliability. Featuring 25 conductors' pairs with gold-plated connectors for high-speed, high-capacity data transfers with Double Shield AL-Foil and Copper Braid to prevent from corrosion, wear and tear..
COMPATIBLE DESIGN: New computers are expensive enough already without having to replace all of your peripherals with new compatible models. SCSI II cables allow you to make the most of your tech investments by guaranteeing long-term performance and compatibility..
AVAILABLE IN MULTIPLE LENGTHS: Choose the length that fits your cable requirement. Neither too long to wrap extra wire in a coil, nor too short that fails to reach your connection point. Select the right length to avoid extra clutt....

Half Pitch D-Subminiature 50 pin (HPDB50) male to D-Subminiature 25 pin (DB25) male SCSI Cable.
Once the standard for high bandwidth throughput connections between mass storage devices SCSI technology evolved to include a vast array of ever improving standards with complex combinations of connection standards.
SCSI is still widely used on many legacy systems but finding the right type of cable for your system can be difficult.
Thankfully Monoprice has a wide array of SCSI cables for many of the most popular systems that have come up through the years.
Monoprice continually strives to improve its product line to bring our customers the best products available.

Mini SAS 36 (SFF-8087) Male Connect to the Host/Controller, 4x SAS 29 connect to the Target/Devices..
4x SAS 29 female with extra 4 pole power. Multiple lanes support current speed of up to 6.0 Gbps through a single cable..
Point-to-point SCSI makes setting up SCSI easier than ever..
Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access..

Intel RS2VB040 4-port SAS Controller * Serial Attached SCSI (SAS) - PCI Express 2.0 x8 - Plug-in Card - RAID Supported - 0 1 5 6 10 50 60 RAID Level - 512 MB (RS2VB040).

1.Attach the adapters to the Type C-C cable（supports PD 65W charging）, those data transmission speed of the adapters are up to 480Mbps, realize safe charging and data transfer.
2.ADAPTERS - As well as a Type C cable, there are 3 adapters included which are Type C to Micro USB, Type C to USB and Type C to..
3.MEMORY CARD SLOTS - As well as 6 TF Card slots and 2 Sim card slots, this multi-tool also has a built in memory reader so you can transfer files on the go..
4.6 CABLES - With a near 11cm Type C Cable and 3 types of adapters, this multi-tool can substitute upto 6 different cable types.
5.PHONE STAND - Not only does this multi-tool allow storage of cables, adapters, sim card and memory cards but it can also double as a phone holder for long travels.

DESIGN – Revolutionary design that integrates all the essential and most frequently used cable connectors..
6 CABLES – With a near 11cm Type C Cable and 3 types of adapters, this multi-tool can substitute upto 6 different cable types..
ADAPTERS – As well as a Type C cable, there are 3 adapters included which are Type C to Micro USB, Type C to USB and Type C to..
PHONE STAND – Not only does this multi-tool allow storage of cables, adapters, sim card and memory cards but it can also double as a phone holder for long travels..
MEMORY CARD SLOTS – As well as 6 TF Card slots and 2 Sim card slots, this multi-tool also has a built in memory reader so you can transfer files on the go..