Top Scsi Cables Reviews

Monoprice SCSI Cable - 6 Feet - HPDB68 Low Voltage Differential Male/Male with Screw

  • Monoprice brings you a wide assortment of classic SCSI (Small Computer System Interface) cables for your legacy storage devices.
  • SCSI was once the de facto standard for high performance systems due to it's faster transfer rates and versatility over the more standard ATA interface.
  • Unfortunately do to it's popularity and failure to standardize on a single connector type a wide variety of cable types exist.
  • We carry cables for many of the most popular configurations.
  • This is a Low Voltage Differential (LVD) cable with 68pin High Pitch D Subminiature HPDB68 connectors.
Check Stock

SCSI II cable, HPDB50 (Half Pitch DB50) Male to DB25 Male, 19 Twisted Pairs, 6 foot

  • HPDB50 Male / DB25 Male, Mold, 19 Pair, 6 ft.
Check Stock

Monoprice 100708 0.8 mm/0.8 mm VHDCI 0.8mm SCSI Cable - 3 Feet - Offset

  • 8mm to High Density D-Sub 68 pin (HPDB68) connector for connecting SCSI storage devices and other compatible peripherals.
  • VHDCI stands for Very High Density Cable Interconnect.
  • This cable features an assembly type offset connector on the 0.
  • 8mm connector side which means that the connector has a two piece shell.
  • That is held together by screws and the connector is not centered on the face of the connector housing.
Check Stock

Monoprice SCSI (HPDB) 68 Female to IDC 50 Female Adapter (100076)

  • The IDC 50 connector is a 50-pin 8-bit SCSI "header" connector used for internal-type ribbon cables.
  • It is also known as the "Alterative 2" connector.
  • It has parallel 25-pin rows and resembles an older ATA/IDE drive cable except that it is wider and has more pins.
  • The HPDB 68 connector is a 68-pin 16-bit SCSI-2 connector used for both internal and external connections (plastic for internal and metal for external).
  • It has parallel 34-pin rows but has the pins much closer together and is therefore narrower than the IDC 50 connector.
Check Stock

CableCreation Internal Mini SAS HD Cable, 1.6FT Mini SAS SFF-8643 to Mini SAS 36Pin SFF-8087 Cable, Mini SAS 36Pin to SFF-8643 Cable, 0.5M

  • ...AS 29 pin SFF-8482 data and power Target drive connectors.
  • DIY or pro installers require a forward fan-out cable with an internal mSAS connector when expanding storage needs for Storage Area Network (SAN) or Direct Attached Storage (DAS) applications.
  • Sturdy molded connectors provide a secure connection.
  • Slim ribbon cables in a woven mesh sheath minimize airflow impact in a computer case.
  • Integrated SATA power supply cables make it easy to see what is connected.
Check Stock

SinLoon SCA 80 Pin to 68 50 Pin SCSI Adapter SCSI 68 Female Adapter SCSI 80 Male Adapter for Data Transfer (50/68/80)

  • Product Name: SCSI three card 68-80-50 ide SCSI hard disk adapter 68 Pin Female to 80 Pin Male to 50 pin IDE (SCSI 80 pin, 68 pin, 50 pin adapter).
  • SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 50 pin interface to 68 pin interface. In this way, 50 pin low-speed SCSI devices can be connected to 68 pin SCSI interface..
  • SCSI Three Turn Card. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start & remote start..
  • The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives..
  • Note: It's a 50 pin IDE,Only available on industrial server IDE 50-pin motherboards. not a 40 pin or 44 pin ide of an ordinary computer. It can't be used on an ordinary computer. Please pay attention!.
Check Stock

SinLoon SCA 80 Pin to 68 SCSI Adapter SCSI 68 Female Adapter SCSI 80 Male Adapter for Data Transfer (68/80)

  • Product Name: SCSI Card 68-80 SCSI hard disk adapter 68 Pin Female to 80 Pin Male (SCSI 80 pin, 68 pin adapter).
  • SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 80 pin interface to 68 pin interface. In this way, 80 pin low-speed SCSI devices can be connected to 68 pin SCSI interface..
  • SCA 80 Pin to 68. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start & remote start..
  • The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives..
  • Product category: chip level maintenance tools - hard disk maintenance tools - hard disk other tools..
Check Stock

ANNNWZZD Internal Mini SAS Cable,SFF8087 36 Pin to SFF8087 36Pin Data Cable,Mini-SAS to Mini-SAS Cable (3FT/1M)

  • 【Kindly Reminder】Please note: this cable can ❌ Not work with SAS Driver. Internal Mini SAS 36pin SFF-8087 to (4) 29pin SFF-8482 connectors with SATA Power.
  • 【Mini SAS to SAS Cable】Mini SAS 36 pin (SFF-8087) connect to the controller, 4 x SAS connect to the HDD (Hard Disc Driver).
  • 【36 Pin to 29 Pin Cable】Mini SAS 36 pin is Host, 4 x SAS 29 pin is target, Internal mini Serial Attached SCSI x 4 (SFF-8087) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
  • 【Controller to SATA Disks】Connecting a SAS controller (SFF-8087) to four SATA disks (SFF-8482).
  • 【What You Get】1 x 3.3 FT CableCreation SFF-8087 to SFF-8482 Cable. Backed with 24 Months Warranty and lifetime technical service.
Check Stock

Micro SATA Cables SCSI HPDB 68 Female to IDC 50 Female F/F Adapter Converter 68 Pin to 50 Pin

  • SCSI 2 devices typically use the HPDB50 connector while the wider HPDB68 connector is used for SCSI 3 connections.
  • You can connect your SCSI 2 and SCSI 3 devices together using this adapter from Monoprice! This adapter features a female HPDB68 connector for connecting to SCSI 3 devices and a male HPDB50 connector for connecting to SCSI 2 devices.
  • The male end includes side clip release latches and side clips for securing the adapter to a panel connector while the female end includes nuts for securing to a line connector.
Check Stock

Pc Accessories - Connectors Pro 3 Feet SCSI to Peripheral CN50 M/M Centronics 50 Pins Male to Male C50, Sun, SCSI C50 Cable CEN50 MM 3-FT Molded

  • SCSI or SUN workstation Cable with Centronics 50 Male to DB50 Male Connectors.
  • This SCSI RS232 cable connects SCSI to SCSI Devices or SCSI systems to SCSI Devices with a Centronics 50-pin or CN50 Male to Male..
Check Stock

EDIMS Mini SAS to SAS Cable Internal Breakout Cable SFF-8087 to SFF-8482 with 4X Molex Power Connectors for Raid Controller to Hard Drive 3.3FT

  • Internal Mini SAS SFF-8643 to (4) 29pin SFF-8482 connectors with power connecting a SAS controller (SFF-8643) to four SATA/SAS disks (SFF-8482).
  • Please note that Mini SAS (SFF-8643) is host, 4 SAS 29 (SFF-8482) is target, internal Mini Serial Attached SCSI x4 (SFF-8643) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
  • Before you buy this cable, Please make sure the Mini SAS (SFF-8643) on your motherboard or RAID controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.
  • Mini SAS (SFF-8643) connect to the controller, 4 SAS connect to the HDD (hard disc driver).
  • 30-Day return for any reason, 18-month warranty, Lifetime Technical support and friendly customer service.
Check Stock

Cable Matters Internal Mini SAS to SATA Cable 3.3 Feet (SFF-8087 to SATA Forward Breakout)

  • ...ller with an SFF-8087 port to 4 discrete SATA drives.
  • Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector.
  • Leverage hardware raid performance with this SATA multi-lane cable.
  • Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters.
  • Supports up to 6Gbs data transfer rate per drive.
  • DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
  • 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management.
  • Slim ribbon cables minimize airflow impact in a computer case.
  • Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity.
  • Woven mesh sheath covers half of the cable for easy routing.
  • P1 to P4 markers provide easy ID after installation.
  • Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection.
Check Stock

Cable Matters Internal Mini SAS to SAS Cable 1.6 Feet, 0.5m (SFF-8087 to SFF-8482)

  • Mini SAS 36 (SFF-8087) Male Connect to the Host/Controller, 4x SAS 29 connect to the Target/Devices..
  • 4x SAS 29 female with extra 4 pole power. Multiple lanes support current speed of up to 6.0 Gbps through a single cable..
  • Point-to-point SCSI makes setting up SCSI easier than ever..
  • Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access..
Check Stock