Top Screws For Pvc Board Reviews

Magnetic Mat, Magnetic Project Mat, Unamela Large Size Writing Note Mat with Dry Erase Pen - Preventing Losing Screws When Repairing Cell Phone, Laptop or Other Electronics

  • 【Upgraded Version】Updated magnetic mat for screws magnetize more small screws or other tiny mental accessories when you repairing Mobile electronic equipment, and it helps you work more organized and tidy. No more waste time searching for the small screws, nails, bolts, pins, anchors, drills & screwdriver bits, or any small metallic objects. Highly improve your working efficiency 40%..
  • 【Record Anytime】This magnet pad for screws dry erase surface and included marker allows the user to not only annotate the original location of screws and process of repairing, but also record any of your thoughts..
  • 【Category Placement】The project mat has a 5 x 4 printed grid that facilitates the classification of small screws and small parts and keeps them in order, which makes your repairing always organized and convenient..
  • 【Quality Comes First】The magnetic project work mat upgraded into 11.8*9.8 inches, which have more than 20% space for you to hold more screws. It was made by PVC material with water resistance, even stubbornly attached handwriting is available to wipe out with wet wipe and microfiber cloth. It's rewritable and more convenient without looking for any pen erasers..
  • 【More Applications】In addition, this rewritable magnetic project pad c....
Check Stock

CAMO Drive Collated Edge Deck Screws 2-3/8 ProTech 1000 ct

  • For use in 1" and 2x (1-1/2") thick treated lumber, composite, capped composite, or PVC decking.
  • Edge Deck Screws install through the edge of the deck board, leaving a fastener-free surface.
  • Rake tip augers material out, Trimhead reduces visibility on edge, ProTech coating is ACQ Compatible.
  • 1000 ct package covers approximately 285 sq ft (joist spacing of 16 inches). Two(2) driver bits included.
  • Use exclusively with CAMO DRIVE: the stand-up deck fastening tool that makes installation 5X faster.
Check Stock

Sanfurney 51-Slot Cassette Tape Storage Rack Ink Pad Organizer Holder, Wall-Mounted

  • Wall mount function. With adhesive screws, you can hang the tape storage rack on the wall. Note: The adhesive screws is only suitable for tile and glass, if the painting wall, please use the screw to hang the product..
  • Each compartment has grooves for easy access to cassettes. Come with a installation paper, and it is very easy to install by following the steps..
  • 51-slot cassette tape storage rack for easy storage and collection of cassette tapes. You can easily see the name of the cassette tape and quickly find the cassette tape you want..
  • Cassette tape organizer holder size: 13.8"L × 3"W × 16.2"H. Made of 5mm and 3mm thick PVC foam board, very sturdy and durable..
  • The opening size of each slot is 4.4"L × 2.8"W × 0.8"H. Not only suitable for storing cassette tapes, but also suitable for storing ink pad or decks of cards..
Check Stock

WUPYI 4 Axis Engraver 1.5KW VFD CNC 6040 Router Milling Engraving Machine USB Port Desktop Engraving Drilling Milling Machine Drill Wood DIY Artwork Woodworking 3D Cutter Printer (1.5KW-6040)

  • ★The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing ability of the machine and can be used to process aluminum alloy and hard wood. Water cooling spindle works more stable and durable.High quality accurate ball Screws drive make the engraving more precision.Anti-blackflash,high precision,long life circle..
  • ★This 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.The mini Frame is movable. The machine can connect with computer as other external device such as printer, scanner...With the assist of the 6040T, your design idea will be real-time display..
  • ★It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal, like aluminum, copper and silver to engrave them into 3D/2D works etc..
  • ★It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models,instrument panels, wooden products, etc..
  • ★Attention: This machine needs to connect ....
Check Stock

MLUOVI Set of 5 Pieces Corner Mounting Shelf with White, Wood Floating Wall Mounted Storage Shelf for Living Room, Bathroom, Bedroom, Kitchen, Office

  • 【Multi-Scene Corner Shelf】This corner shelf can be used in any corner，Such as suitable for bedroom, kitchen, bathroom, office, study and other places, and it is a good helper for your home storage and decoration. It can be used to place books, small flower pots, cosmetics, photo frames and more..
  • 【High quality material】Wall corner shelf Made of 0.47" PVC board, durable、waterproof、Actinomycosis，BPA free.No sharpen edge design avoids accidentally scratch to human body or pets..
  • 【Packaging and Size】 A pack of 5 shelves, white colo. Radius: 21cm/8.26inch. quarter of a circle..
  • 【Easy Installation】Use screws to fix, just fix the matching buckle on the wall with screws, and then fix the flat plate and buckle with screws. Use screws to fix the corner shelf on each floor more firmly and durable..
  • 【Design Concept】Simple Design but functional wall shelves, helps turn any corner into elegant and useful storage and display space. The shelves will help make full use of corner space and highlight your decor objects.The shelves only fit for Right Angled corner of 90 degrees. Easy to install and hang.If there is something that makes you dissatisfied with the product, we will fully support your after-sales needs..
Check Stock

Dashtop 40 pcs L Type PCB Mounting feet / legs with Screw Fit for Arcade Games Jamma Game Video Games Windows System Raspberry Pi Board

  • MATERIAL: PCB standoffs are made of insulating plastics, strong and durable in use..
  • SIZE: The size of insulated PCB spacer – 20 x 20 x 9mm / 0.8 x 0.8 x 0.35in (LxWxH). Supporting Height: 20mm / 0.8 inch.
  • TWO SCREWS HOLES: Each L type PCB board mounting feet comes with 2 screws to secure the circuit board to other surfaces easily.
  • APPLICATIONS: Circuit Board Standoffs suit for game console motherboard, video board, and so on, serve as ideal replacement parts and provide you much....
  • Apply for: our L type PCB board mounting feet with screws fit well with arcade gaming board, video board and so on, serve as ideal replacement parts....
Check Stock

ANFU Cutting Board Feet, Wood Feet for Countertop Cutting Board- Kit to Elevate and Skid-Proof Your Cutting Board (Beige)

  • Cutting board feet set- 4 pcs adjustable length wooden screws cutting board feet with self tapping screws and washers to ensure tight and stable fit Cutting board ((Not included Cutting Board).
  • Materia: Made of wooden cutting block feet not only for the hardwood aesthetic but also for qualities of superior stability in temperature fluctuation and water resistance, easy matches your different size chopping block.
  • Adjustable cutting board feet: Multiple heights can be adjusted and two installation methods, increase more use space, best to solve the problem of small kitchen space..
  • Easy to install- Position and mark where you would like to install the feet at.
  • tear off the adhesive tape and fit on the chopping block or install these screw on feet with the provided self tapping screws, as picture 4.
  • Feet for cutting board, raising chopping block off wet surface will keep it from warping, keep proper air circulation for the longevity of your cutting board.
Check Stock

CAMO Drive Collated Edge Deck Screws 2-3/8 Stainless Steel 1000 ct

  • Use in 1" and 2x (1-1/2") thick wood, composite, capped composite, or PVC decking in areas near open water.
  • Edge Deck Screws install through the edge of the deck board, leaving a fastener-free surface.
  • Rake tip augers material, Trimhead reduces visibility on edge, 316 Stainless Steel resists corrosion.
  • 1000 ct pkg covers approximately 285 sq ft (joist spacing of 16 inches). Two(2) driver bits included.
  • Use exclusively with CAMO DRIVE: the stand-up deck fastening tool that makes installation 5X faster.
Check Stock

Drywall Anchor kit - Hollow Wall Anchors with Screws ，self-Drilling Hollow Wall Anchor for Drywall，Nylon - Plastic - Buildex，all-60 pcs Anchor 30+Screw 30

  • Best Quality Drywall Anchors, Pre-drills precise hole in gypsum wall board - No hole preparation required.Starts easier than other self-drilling drywall anchors.
  • The plastic material anchors are very durable and not easy to be broken, drywall self-drilling screws kit is made of high quality stainless steel, which features is strength and offers good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas. They have superior rust resistance and the excellent of oxidation resistance, which can ensure long time using and prolong screws lifespan..
  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw , increased holding power,Anti-rotation structure design of the expansion sleeve, tighten the screw will not be followed in the drilling rotation..
  • These drywall anchors and screws is perfect for hanging a wall shelf in fairly soft drywall. You can use the kit to hold your blinds or shelf, and the ribs on the plastic drywall anchors prevent the anchor from turning in the hole during installation..
  • Application：Drywall self-drilling screws kit is suitable for gypsum board, benzene board, decorative panel, asbestos board, hollow board solid board, etc. for curtain installation, lamp inst....
Check Stock

Rubber Cutting Board Feet with Stainless Washer and Screws, 1 inch Black Round Rubber Feet, Non Slip Bumper Pads for Furniture, Electronics & Application,20 Pack

  • These rubber feet can make the cutting board hover just off the table and provide enough separation that pick the board up easier, so the cutting board won’t suck on a wet table..
  • RoHS Compliant rubber is hard but elastic, the built-in washer can keep them from tearing out as you tighten the screws. Both the washers and the screws are stainless steel. Easy to install..
  • These rubber pads provide a good grip, shock absorption, and cracking resistance. No Marking ,No Noise..
  • Best for use on cutting board, barbecue board, cheese board, also you can install them to the bottom of cabinet doors, glass table tops , electronics and other furniture feet ..
  • The cutting board rubber feet Size: 0.354" Tall x0.905" Top Width x 1 " Bottom Width (9mm*23mm*25mm). each set include 20 rubber feet and 20 #10 Stainless Steel screws.
Check Stock

2021 Premium Inflatable Stand Up Paddle Board (6 inches Thick) with SUPs Accessories & Carry Bag | Wide Stance, Surf Control, Non-Slip Deck, Leash, Paddle and Pump, Standing Boats (red)

  • ?【Complete Package】 Board, Fully Adjustable Aluminium Paddle Measures From 65-82inches Long, Navigator ISUP Travel Backpack, Shoulder Strap, Coiled Leash, Waterproof Bag, Removable Fin, Double Action Pump : During The 1st Phase Of The Inflation Use Double Action:clip Closed,Fig.1, When The Pressure Arrives To A Relatively Higher Value.
  • ?【WIDE AND LIGHTWEIGHT SUPs DESIGN】 Stand Up Paddling Board Is 10' Long And Provides 30'' Of Deck Width For Improved Stability And Balance While Standing.Paddle Boards Premium Inflatable Paddle Board Is Made Of The Highest Quality Military Grade Material. Providing The Most Durable Lightweight Board On The Market..
  • ?【1 YEAR WARRANTY ON MATERIALS】.inflatable Paddle Boards,paddle Board,inflatable Paddle Board,stand Up Paddle Board,aqua Plus Inflatable Paddle Board,inflatalbe Sups,paddle Boards,standup Paddle Board,blow Up Paddle Board,stand Up Paddle Board Inflatable,inflatable Stand Up Paddle Board,sups Inflatable Paddle Board,portable Paddle Board,paddle Boards For Adults,sups Paddle Board,standing Paddle Board Inflatable,stand-up Paddle Boards,standing Paddle Board.
  • ?【Ultra-Light Construction Dual-Layer PVC】Infatable Paddle Board Is Made Of The Highest-quality Military-grade PVC Materials. Constructed Wit....
Check Stock

Bolt-.25-20x1.25z(180 180024MA;313674MA;

  • Brand new and high quality ABS Injection Molding Triangular Shaped Interview Mic Microphone Station Logo..
  • Square shaped design, large place to show logo, can be engraved with PVC board by yourself or pasted by multicolor printing sticker..
  • Creative Shaped design, large place to show logo, can be engraved with PVC board by yourself or pasted by multicolor printing sticker..
  • Portable and practical Square shaped microphone station logo,large place to show logo, can be engraved with PVC board by yourself or pasted by multicolor printing sticker..
  • Suitable for interview, corporate meetings, press conferences, family gatherings singing, KTV, and very light to carry..
Check Stock

Mermaid Light Switch Cover Electrical Duplex Combination for Kids Girls Bedroom Kitchen Home Bathroom Decor Faceplate-Double Toggle

  • Package Included:1 X Two Gang Combination Switch Plate - Toggle / Decora With Screws. Plate Measures 4.5 Inches X 4.5 Inches.
  • Love The Attention To Detail - The Screws Match The Color On The Board. This Light Switch Board Is So Cute! It Adds A Nice Design Touch To Your Room And It'S Super Easy To Install. It Comes With Painted Screws So You Don'T Need To Find Any Black Screws To Try And Blend In With The Board, And You'Ll Be Very Happy With It..
  • Switch Plates Are Made Of Durable Plastic,Flexible And Elastic,Able To Withstand Strong Impact And Heavy Pressure.Smooth Surface,That Resists Scratches And Normal Wear And Tear..
  • Matching Screws Are Included For Easy Installation.Easy To Clean,For Your Safety,Please Wipe With A Dry Cloth..
  • 100% Money Back Guarantee: To Leave Every Customer A Good Purchased Experience Is Our Everlasting Goal. If There Is Any Questions, 100% Money Back Or Replacement. No Risk To Buy! Add To Your Cart Now..
Check Stock