Top Screw Type Jost Reviews

1 & 2 Kings (Believers Church Bible Commentary Series)

  • 527 Pages - 11/02/2021 (Publication Date) - Herald Press (Publisher).
Check Stock

A Very Punchable Face: A Memoir

  • 336 Pages - 07/13/2021 (Publication Date) - Crown (Publisher).
Check Stock

Inside Out Joy Blue Costume Wig

  • Gabriel Iglesias, Hannibal Buress, Colin Jost (Actors).
  • Indonesian, Russian, Arabic, English, Danish (Playback Language).
  • Indonesian, Russian, Arabic, English, Danish (Subtitles).
Check Stock

DP 0118-600 Carburetor Float Bowl Drain Screw (Replaces Hex/Allen Head Type Screw) Fits Kawasaki ATV

  • NOTE: Some Kawasaki models list 2 different drain screw part numbers. The earlier models use an Hex/Allen Screw type and later models use the Phillips Screw type. If your original drain screw is the Hex/Allen Screw Type, THIS IS the correct screw for your application. If your original drain screw is the Phillips Screw type this is not the correct screw..
  • Fits Kawasaki KEF300 A Lakota Utility 95-00, KEF300 B Lakota Sport 01-03, KFX250 KSF250 A Mojave 04, KFX700 KSV700 A/B 04-09, 11 (11 Canada only), KLF300 B Bayou 2×4 92-04, KLF300 C Bayou 4×4 89-05 (05 Canada Only), KLF400 B Bayou 4X4 93-99 (97 Canada only), KRF750 A/B Teryx 4X4 08, KRF750 F Teryx 4X4 NRA Outdoors 08, KSF250 A Mojave 98-03.
  • Fits Kawasaki KVF300 B Prairie 2×4 99-02, KVF300 A Prairie 4X4 99-02, KVF360 B Prairie 2×4 03-09, KVF360 A Prairie 4X4 03-13, KVF400 B/D Prairie 2×4 98-02, KVF400 A/C Prairie 4X4 97-02, KVF650 A/B Prairie 4X4 02-03, KVF650 D/E Brute Force 4×4 05-13, KVF650 F Brute Force 4x4i 06-13, KVF700 A/B/D Prairie 4×4 04-06, KVF750 A/B/C Brute Force 4x4i 05-07.
  • Contains (1) Carburetor Drain Screw (Replaces Hex/Allen Head Type Screw). Made in Japan of highest quality materials. OEM Fit – Designed and manufactured to work perfectly with ....
Check Stock

ArtDirect Jost Amman 13x18 Black Modern Frame and Double Matted Museum Art Print Titled - an Officer of The Rank of ‘Oberster Feldprofoss’ in The Imperial Army (1556)

  • Artist: Jost Amman / Title: An Officer of the Rank of ‘Oberster Feldprofoss’ in the Imperial Army (1556).
  • High Quality Framed Giclee Art Print Direct from Museum Prints.
  • Framed in a Black Modern Wood Frame with Double Matting by Crescent.
  • Made in the U.S.A. and Satisfaction is Guaranteed.
Check Stock

ArtDirect Jost Amman 17x24 Black Modern Frame and Double Matted Museum Art Print Titled - an Officer of The Rank of ‘Oberster Feldprofoss’ in The Imperial Army (1556)

  • Artist: Jost Amman / Title: An Officer of the Rank of ‘Oberster Feldprofoss’ in the Imperial Army (1556).
  • High Quality Framed Giclee Art Print Direct from Museum Prints.
  • Framed in a Black Modern Wood Frame with Double Matting by Crescent.
  • Made in the U.S.A. and Satisfaction is Guaranteed.
Check Stock

CLAMP SCREW

  • This part is compatible with models including.
  • DW718 TYPE2,DW705TY5,DW718 TYPE1,DW705STY5,DW705STY6,DW705 TYPE 7,D705-04,DW718 TYPE3,DW705 TYPE 4,DWS780 TYPE 1,DW705 TYPE 3,DW703 TYPE 3,DW704 TYPE 4,DW704 TYPE 3,DW708-TYPE 4,DW704 TYPE 2,DW715 TYPE3,DW715 TYPE2,DW378GT TYPE 1,DW717 TYPE1,DW717 TYPE2,DW703,DWS709 TYPE 20,DW368K,DW706TY1,DWS782 TYPE 20,D704-04,DW708TY3,DW708TY1,D704-04 TYPE 2,DW704,DW715 TYPE1,DW705,DW716 TYPE4,DW716 TYPE3,DW716 TYPE2,DW716 TYPE1,DW713 TYPE1,DW713 TYPE2.
  • Follow appropriate safety practices when installing screw 145344-01.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Dewalt.
  • This screw (part number 145344-01) is for miter saws.
Check Stock

M12-1.75 x 50mm Zinc-Plated 12.9 Alloy Steel Socket Head Cap Screw 50 pk.

  • Price For: Each Drive Type: Hex Socket System of Measurement: Metric Dia./Thread Size: M12-1.75 Screw Style: Socket Head Cap Screw Thread Dia.: M12 Fastener Thread Type: Metric Coarse Thread Direction: Right Hand Material Grade: Class 12.9 Item: Metric Socket Head Cap Screw Vented Hole Size: Not Vented Basic Material: Steel Min. Tensile Strength: 176, 900.
  • Head Height: 12mm Head Dia.: 18mm Rockwell Hardness: C39 to C44 Thread Style: Fully Threaded Screw Head Type: Cylindrical Thread Length: 50mm Screw Industry Standards: DIN 912 Drive Size: 10mm Fastener Finish: Zinc Plated Length: 50mm Country of Origin (subject to change): Multiple.
Check Stock

#8 x 1-1/4 Deck Screws 316 Marine Grade Stainless Steel Square Drive Type 17 Wood Cutting Point Quantity 100 Size Number 8 x 1-1/4 Long by Fastenere

  • Screw Size #8 (0.164") - Straight Pilot Drill size for Soft Wood 7/64 . Straight Pilot Drill size for Hard Wood 1/8.
  • Screw length measured from top of flat to tip of screw 1-1/4" (1.25") - Screw head Diameter 0.340".
  • Made of highly corrosion resistant 316 Marine Grade Stainless Steel. Type 316 is also used extensively for surgical implants within the hostile environment of the body..
  • Deck screws have a type-17 (auger type) thread cutting tip for installation into decking materials. They have bugle heads that allows the screw to depress the wood surface.
Check Stock

60pcs Thread Insert Kit 304 Stainless Steel Wire Screw Sleeve Thread Repair Insert Assortment Kit

  • USED FOR:Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread.
  • A CERTAIN ELASTIC:Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to f.
  • BETTER THAN THE NORMAL LOCKING DEVICE:The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device.
  • CAN BE USED REPEATEDLY:The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw, and can be used repeatedly.
  • EXCELLENT CONNECTION PERFORMANCE:Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.
Check Stock

#4-40 x 1 18-8 Stainless Steel Vented Socket Head Cap Screw

  • Price For: Each System of Measurement: Inch Screw Industry Standards: ASME B18.3 Drive Type: Hex Socket Rockwell Hardness: B70 to B95 Basic Material: Stainless Steel Head Height: 0.112" Head Dia.: 0.183" Thread Dia.: #4 Drive Size: 3/32" Fastener Finish: Plain Vented Hole Size: 0.035" Screw Style: Socket Head Cap Screw Material Grade: 18-8.
  • Thread Direction: Right Hand Temp. Range: 250 Degrees F Screw Head Type: Vented Item: Vented Socket Head Cap Screw Min. Tensile Strength: 80, 000 psi Dia./Thread Size: #4-40 Thread Style: Partially Threaded Thread Length: 3/4" Length: 1" Country of Origin (subject to change): Multiple.
Check Stock

100PCS M10 Wire Screw Sleeve,Thread Repair Insert Kit,Stainless Steel Thread Locking Inserts,for Aircraft, Automotive, mechanized Fasteners

  • Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread.
  • Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to f.
  • The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device.
  • The hardness of the wire screw is higher than the screw, so it has little wear and tear in connection with screw,and can be used repeatedly.
  • Strengthen the connection strength and improve the connection condition, avoid sliding wire, wrong tooth phenomenon, and obtain excellent connection performance.
Check Stock

1/4-20 Brass Push in Threaded Insert 0.5\ Long (50 pcs)

  • 【Premium Quality 】 Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread. The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device..
  • 【Effect】 Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength..
  • 【Material】 Made of high quality Stainless Steel, good corrosion resistance and never rust, durable to use,have a long time..
  • 【Special】 Wear resistant. Used for frequent disassembly, it can greatly improve the life of thread. Anti-loose. Especially for the aircraft and other products requiring high insurance coefficients..
  • 【Easy to maintain】 The damaged screw holes shall be put into the wire screw sleeve , which can be used again to avoid the possibility of damage to the workpiece..
Check Stock