Top Scope Rings For M1a Reviews

Springfield M1A M14 Rifle Scope Mount

BadAce M1A M14 Scope Mount Picatinny Rail Low-Profile

• Centrally mounted and self-aligned to the bore.
• Works on all M1A, USGI M14, and Norinco receivers.
• No gunsmith required, easy installation in 20 minutes.
• Low-profile design allows the scope to be mounted closer to the receiver.

ApexHorizon Scope Rings Optic Mounts - Titanium Alloy Scope Rings 30mm for Picatinny Rail, Tactical Heavy Recoil Rifle Scope Rings Precision Mounts Rings (Scope Rings 30mm Mount)

• Titanium Alloy Scope Rings: Made of titanium alloy and precision-machined aircraft-grade 6061 aluminum alloy. Titanium alloy mounting part is high solidity, shockproof, anti-shake, anti-corrosion, and wear resistance. A reliable material to make sure your scope is precisely and firmly mounted on Picatinny rail..
• 30mm & Medium Profile: Set of 2 scope rings are both 1.18 inch/30mm diameter. 40in/Ibs ring torque, 2 screws for rail clamping, and 4 screws on top to ensure your rifle scope reaches alignment. Mount on rail easily, stay aligned, and without any wobble. Removed or installed quickly by using Allen key..
• Rings for Picatinny Rail: The optic rings fit for standard Picatinny rail. The recoil control key holds the scope rings perfectly still and will not shift or move under fierce recoil. By utilizing titanium alloy on the clamping base, the scope rings achieve a way longer service life than similar scope rings and work perfectly under extreme environments..
• Professional Choice: The scope mount rings are heavy duty style yet lightweight so that it withstands heavy recoil and does not add up extra weight. Each ring is about 81g. Perfect for outdoor hunting, tactical and precision target practice..
• 2-Piece Scope Rings Design: Different rifle scope has a ....

EZshoot Reflex Sight with 4 Reticles Red Dot Sight, Reflex Holographic Optic Scope with 20mm Rail Mount ，Absolute Co-Witness

• ✌【Perfect 1" Scope Rings For 11mm Dovetail Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 Pcs Medium Profile + 2 Pcs High Profile in one package. These scope rings fit for 3/8'' or 11mm dovetail rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
• ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.55'' gap from base of mount to bottom of ring, Item Height 1.77'', Dimension 1.61*1.77*0.83 Inch, Weight 1.55 Oz per ring.
• 2 Pcs High Profile: 0.82'' gap from base of mount to bottom of ring, Item Height 2'', Dimension 1.61*2.0*0.83 Inch, Weight 1.83 Oz per ring..
• ✌【Built-In Tape Protection & With Stop-Pin Design】 Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. One of the high rings and one of the medium rings have a stop pin the bottom, Which prevents the ring from sliding once set..
• ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field..

Atom Optics 30mm Dovetail Scope Rings for 3/8\ or 11mm Dovetail Rails High Profile Scope Mounts 2PCS

• 30mm scope rings 11mm Dovetail Rails 2pcs high profile，with allen wrench.
• 3/8 Dovetail scope rings made of solid aluminum alloy with anodized black matte finish,precision machined.
• Dovetail scope rings for 3/8" or 11 mm,the ring is for most scopes which are in 30mm scope tube.
• 11mm Dovetail scope ring Base Designed with Locking Hex Screws to Tightly Fit on Mounts with 11mm Dovetail Dimension.
• High profile scope rings (item height:2"),the height from the center of the scope tube to the picatinny base is 1.33 inches(34mm).

M1Surplus Scout Rifle Kit with 2-7x32 Illuminated Long Eye Scope +Tactical Cheek Rest w/ Flag Patch Fits MOSSBERG MVP Scout Rifle Marlin 1895SBL Ruger GUNSITE Scout M1A SOCOM 16 II Scout Squad

• M1SURPLUS Presents a Complete Optics Kit For Your Favorite Scout Setup !.
• Extended Eye Relief 2-7x32 Rifle Scope With illuminated Reticle Function.
• Perfcet For Ruger Scout Rifle, Ruger Scout Rifle, Mossberg MVP Scout Rifle, M1A SOCOM 16 II Scout Squad Rifle Rifle.
• Aluminum Scope Ring Mounts Fits Most Weaver / Picatinny Type Rails.
• This item Cannot be Exported Outside the USA.

UTG M1 Carbine Mount Complete with 1\ Rings , Black

• Design for All Standard Pi-catinny Rails. 2 Type of Different Heights 1 inch Scope Mount Rings Contain 2 Pack High Profile Rings and 2 Pack Medium Profile Rings. Perfect for All Standard 21mm Rails. Perfect for Mounting Most Scopes Which Are in 1''/ 25.4mm Scope Tube..
• Four Set Of Two Type 1'' Scope Rings, 2 Pack Medium Profile, 0.5'' Gap from Base of Mount to Bottom of Ring. ( Item height: 1.9''). 2 Pack High Profile, 0.71'' Gap from Base of Mount to Bottom of Ring. ( Item height: 2.0'')..
• Hollowed-Out Design & Built-In Tape Protection: Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
• Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
• Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off....

Feyachi RM26 Picatinny Riser Mount, 0.75 inch 5 Slots Riser Mount for Red Dot Sight

• ✌【Perfect for All 21mm Picatinny Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 pcs medium profile + 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
• ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.5'' gap from base of mount to bottom of ring, Item Height 1.9'', Dimension 1.9 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.
• 2 Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring..
• ✌【Hollowed-Out Design & Built-In Tape Protection】Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
• ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe p....

Orion 7382 Guide Scope Ring Mounting Bar

• Rigid anodized aluminum bar used for coupling guide scope rings to an astrophotography telescope.
• Attach guide scope rings to this mounting bar, then attach bar in piggyback orientation to imaging telescope.
• Multiple holes along length of mounting bar allow rings to be positioned for long-tube or short-tube guide scopes.
• Pre-drilled holes allow easy attachment to Orion SkyView Pro, Sirius, and Atlas mounted telescopes with tube rings.
• Astrophotography telescope must be equipped with tube rings in order to attach guide scope ring mounting bar.

Monstrum Pro Series 7075 Aluminum Scope Rings | 30 mm | Medium Profile

• Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
• Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
• Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
• Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
• All Monstrum products are now protected by Monstrum’s lifetime guarantee.

Monstrum Pro Series 7075 Aluminum Scope Rings | 1 inch | Medium Profile

• Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum – providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
• Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
• Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
• Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
• All Monstrum products are now protected by Monstrum’s lifetime guarantee.

PRI Polymer Ring Inserts - 30mm to 1 Inch. by Unknown

• Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
• 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
• Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
• Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
• Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.

kemimoto 2Pcs R-ifle Scope Rings 1 Inch Pica-tinny Aluminum Tactical Sporting Optic Rings Rail Optics Mounting Kit Black Solid Steel Shooting Hunting

• 【SIZE AND SHAPE DESIGN】:2 Pieces 1 inch Solid scope rings which made with solid steel material,.
• 【SEMI-SEPARATION DESIGN】：Unlike 6 screws which need to screw with allen wrench which takes a lot of time. Our scope rings with semi-seperation design so that you just need to screw two srews with allen wrench to lock the rings.It will save your time and lock up your scope solidly.
• 【STAR NUT DESIGN】：The install of tactical scope rings was extremely easy and design with the star nut so you can use hand to screw the rings onto your Pica tinny rail easily.
• 【COMPLETE ACCESSORIES】:The scope rings comes with extra 4 screws.
• allen wrench and installation instruction in the package to make installation a breeze.