Top Sbc Single Plane Intake Reviews

1957-1986 SBC Small Block Chevy Aluminum Performer Dual Plane RPM Intake manifold 350 400

  • Engine Make/Size:Chevy Small Block (265-400).
Check Stock

Aluminum High Rise Small Block Chevy SBC Vortec Hurrican Single Plane Intake Manifold 350 Single Plane Modified 3000-7500 RPM

  • This Satin Vortec Hurricane Single Plane Intake Manifold is the best performing single plane race style manifold available for engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • It has been proven over and over in dyno tests and on track use to provide unequaled power and performance..
  • It features four corner water ports, a tapped fifth port in the front face, nitrous bosses, and dual distributor holddowns..
  • 360° single plane high rise design for outstanding power from 3000~7500 RPM.
Check Stock

Edelbrock 7161 Performer RPM Intake Manifold

  • Accepts late-model water neck, air-conditioning, alternator and HEI equipment.
  • Intake material is made of aluminum with a natural finish.
  • Basic operating RPM range is from 1, 500 to 6, 500 RPM.
  • Style of the intake is dual plane and carburetor quantity is single.
Check Stock

A-Team Performance - Angle Plug Aluminum Cylinder Heads 64cc Chamber 205cc Intake Ports 2.020 Intake Valve 1.600 Exhaust Valve - Compatible with SBC 283 302 305 327 350 383 and 400 to 1986 Set of 2

  • Angle Plug Aluminum Cylinder Heads 64cc Chamber 205cc Intake Ports 2.020 Intake Valve 1.600 Exhaust Valve.
  • Compatible with SBC 283 302 305 327 350 383 and 400 to 1986 Set of 2.
  • These Bare Aluminum SBC heads have a 205cc Runner with 64cc combustion chambers with heart-shaped chambers..
  • Intake Valve Diameter: 2.020″ (up to 2.050 with machining, we do not offer this service).
  • Head also features a deck thickness of .625. Spring seats are cut to 1.550 diameters.
Check Stock

BATONECO Polished Airgap Intake Manifold High Rise Dual Plane Compatible with SBC Chevy 350 400

  • 100% NEW - Made of high-quality aluminum material, Natural Intake Finish, Package Contents: Intake Manifold..
  • COMPATIBILITY - Intake Manifold Compatible with Chevy Small Block SBC 350 400..
  • ADVANTAGE - Basic Operating RPM Range: Idle-5500.
  • FEATURE - intake manifolds are the perfect performance upgrades for your engine. These cast-aluminum manifolds are pressure-tested for leaks..
  • DESIGN - The intake manifolds feature a high-flow runner design to deliver improved power from idle to 5500 rpm..
Check Stock

Dokili Aluminum Intake Manifold Small Block Air Gap for SBC Vortec 350 1996-up

  • 【Fitment】Dokili aluminum intake manifold is compatible with 96+ Vortec engines..
  • 【Features】Dokili intake manifold comes with 180° high rise and dual-plane designs, providing excellent high RPM power, from 1,500 to 6,500 rpm. It features four corner water outlets, dual distributor hold down provisions, accepting late model water neck, A/C, alternator and HEI brackets..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds. Port size measures 2.06" x 1.18" and intake measures 4.65" tall..
  • 【Dual Plane】The intake is square bore style and works with all 4150 Holley style carburetors. Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
  • 【Air Gap】The air gap design allows air to flow under the plenum to prevent heat transfer from the engine resulting in more horsepower..
Check Stock

Edelbrock 2701 Performer Intake Manifold

  • Use on stock or original equipment standard deck.
Check Stock

ARP 434-2002 SBC S/S Intake Bolt Kit 6pt.

  • ARP 434-2002 SBC S/S Intake Bolt Kit 6pt..
Check Stock

Edelbrock 2101 Performer Intake Manifold

  • Intake is made of aluminum material with a natural finish.
  • Basic operating RPM is from idle to 5, 500 RPM.
  • Intake is 50-state street legal, when used with the correct carburetor and in the correct application.
Check Stock

BBC Holeshot Dual Plane Intake Manifold Oval Port, Plain

  • This Holeshot Manifold by Speedway Motors is the lowest profile intake design.
  • It is the perfect improvement over stock intake manifolds without worrying about hood clearance.
  • Manifolds are a dual-plane intake runner design and machined to accept spread port carburetors.
  • Has a idle-5500 rpm range and an oval port.
  • Features an aluminum construction with a natural finish.
Check Stock

Small Block Chevy Intake Manifold SBC Vortec Dual Plane 350 383 Intake Manifold 1996-UP Black

  • The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,500 rpm..
  • Engine Make/Size:Chevy Small Block (350,383 1997-up).
Check Stock

1 PC SHLPDFM Single Plane Intake Manifold Cast Satin Finish Aluminum Intake Manifold Compatible with 1957-1995 SBC Small Block Chevy 350 400 RPM 3500-8000

  • ★Compatible with 1957-95 Small Block Chevy 350 400 Manifold..
  • ★Single plane design intended for serious street and race applications.
  • ★Made of high quality Cast Aluminum material,maximum durability,Deformation resistance, high strength, good wear resistance, high hardness, long life..
Check Stock

Heater Hose Fittings 1\\/2 NPT Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383 Chrome 3\\/4 Water Pump 5\\/8 Intake Mainfold Heater Hose Connector

  • Fitment: Heater Hose Fittings Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383.
  • Material: Intake & Water Pump Heater Hose Fittings is Made of high-quality Iron, which is durable,scratch resistant, corrosion resistant and impact resistance.
  • Features: Our Heater Hose Fittings are a great choice for connecting heater hoses to your water pump and intake manifold.
  • Package Includes: (1) 5/8" Fitting x 1.7913" Length With 1/2-14 NPT , (1) 3/4" Fittings x 2.933" Length With 1/2-14 NPT.
  • Please check to make sure you need 1/2" NPT Heater Hose Fittings.
Check Stock