Top Saws Saw Blade Reviews

SUIZAN Japanese Flush Cut Saw Small Hand Saw 5 Inch Pull Saw for Hardwood and Softwood Woodworking tools Trim Saw

  • ...ty Japanese steel. The high-quality steel makes razor sharp cuts..
  • MADE IN JAPAN: All SUIZAN woodworking tools are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years..
  • BLADE FOR HARDWOOD AND SOFTWOOD: With this small hand saw, you can easily cut oak, sandalwood, ebony, mahogany, maple, walnut and pine with a robust blade for hardwood. The blade for softwood can be used for white cedar, Japanese cedar, larch, paulownia wood and many others..
  • DIVERSIFY YOUR WOODWORKING LIFE: No matter if you are a master or a beginner, using traditional Japanese-style saws gives you a brand new experience and lets you make a wider range of woodworking products, thus changing your life!.
Check Stock

MASTEC 8 Inch 64 Tooth Circular Saw Blade Anti Kickback Tooth for Wood Cutting with 5/8-Inch Arbor

  • 【Application】:Fast smooth clean cutting and widely used in Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws..
  • 【ATB Tooth】:Alternate Top Bevel Teeth blade ideal for cutting all kinds of wood.Such as Hard Wood,Soft Wood,Plywood,Chipboard..
  • 【Anti-Kickback Shoulder】:For safety reasons,preventing inversion of saw blade during cutting..
  • 【Specification】:8 inch 64T fine finishing wood cutting blade with a 5/8 inch arbor..
  • 【Good Service】:Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement.Any problems will be solved within 24 hours..
Check Stock

Japanese Pull Saw Professional Ryoba Saw 10 Inch Double Edge Flush Cut Hand Saw with Portable Bag for Woodworking

  • ...are called “pull saws”. In comparison to “push saws,” which cut materials via pushing, “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner.
  • [10 Inch Ryoba Double Edge] - The double sided general purpose carpenter's saw has impulse hardened teeth on both edges of the blade.
  • The 18 TPI triple-cut coarse teeth for ripping and the other side 6TPI to 10TPI fine teeth for highly precision crosscutting. The length of the blade makes for long pull strokes and therefore fast cutting — cross cut a 2 x 4 in 30 seconds! It enables you to make a wider variety of woodworking products.
  • [Super-thin Replaceable Blade] - The 0.023 inch thick, 10 inch long blade consisted of top quality japanese steel gives a fine kerf, handling size for highly precision work and provides accurate cuts with much less effort. Plastic head thumb screw makes it release or install the saw blade easily.
  • [Ergonomics TPR handle] - The ergonomic handles are wrapped with Thermal Plastic Rubber for a secure grip. After working for a long time, it can still make your hands feel comfortable.
  • [The Organized Saw Bag] - A portable bag for protecting, storaging, carrying and organizing your pull saw. Maintain your pull saw blades With the bonus teeth....
Check Stock

5-4/5' 52 Teeth Carbide Tip Circular Saw Blades Radial Arm Saw Blade Table Saw Blade Miter Saw Blades with 4/5' Arbor for Woodworking

  • Saw Blades Specifications - 5-4/5" Ultra-thin kerf Wood Cutting Circular Saw Blade for fast cutting, Teeth: 52T, Diameter: 5-4/5"/ 147mm, Arbor: 4/5"(20mm), HI-Density Carbide Tip for Maximum Performance.
  • MAX RPM - 10000, Kerf: 0.055"/1.4mm, Hook Angle(forward): 20 Degree, Tooth design: ATB, Fast and Smooth Cuts..
  • ATB Tooth Design to facilitate splinter discharge and to prevent the saw blade from being blocked by sawdust, make cutting easier. Extra-hard steel blade body - delivers accuracy and resists bending and deflection for true cuts..
  • Laser cutting Anti-Vibration Slots can drastically reduce vibration and sideways movement during the cutting process, Also help channel heat build-up during the cutting process, allowing the blade to expand and contract, extending the blade life..
  • Upgraded to Teflon surface coating, strong non-stickiness, lowest friction coefficient, anti-adsorption, high-temperature resistance. Smooth and efficient rotation..
  • Ideal for ripping and crosscutting on softwood, hardwood, plywood, chipboard with fine finishing, not for metal cutting. Widely use for Circular Saws, Miter Saws, Table Saws, Hand Saws, and Chop Saws, save your time and energy..
Check Stock

GreatNeck 74003 15 Inch Aggressive Tooth Handsaw, Aluminum Frame, Wood Saw, Branch Cutter, PVC Cutter, Tree Saw, Handsaw for Wood, Hand Saw for Trees

  • CUTS QUICK: Wood cutting saws feature 9 teeth per inch/10 points per inch for delivering a rough cut.
  • Tri-bevel tooth design for faster, more efficient wood cutting.
  • Wood features deep gullets for fast and efficient wood chip removal.
  • DURABLE WOODWORKING SAW: Induction hardened 1MM SK-5 steel saw blade to ensure durability and rust resistance.
  • This is a long-lasting tree saw from a company known for producing high quality hand saws for trees.
  • COMFORTABLE TO USE: Small wood saw features a composite anti-slip comfort handle for reduced hand fatigue.
  • Plywood hand saw has Great Guard coated blade to reduce friction.
  • Fast and comfortable hand saw for woodworking.
  • EASY TO USE: Our handsaw for wood features built-in 45° and 90° angle markings for guided cutting as well as a 12 inch ruler on the back of the manual saw for measuring and accurate cuts.
  • Make quick, precise cuts with this handsaw for trees.
  • WIDELY USEFUL SAW: Our hand saws for cutting wood also tackle a variety of other cutting tasks.
  • Use it for gardening, cutting tree branches, even cutting PVC pipe.
  • Cuts fasters than other saws, stays sharp, and stands up to all sorts of cutting tasks.
Check Stock

GreatNeck 74004 20 Inch Aggressive Tooth Handsaw, Aluminum Frame, Wood Saw, Branch Cutter, PVC Cutter, Tree Saw, Handsaw for Wood, Hand Saw for Trees

  • CUTS QUICK: Wood cutting saws feature 11 teeth per inch/12 points per inch for delivering a rough cut.
  • Tri-bevel tooth design for faster, more efficient wood cutting.
  • Wood features deep gullets for fast and efficient wood chip removal.
  • DURABLE WOODWORKING SAW: Induction hardened 1MM SK-5 steel saw blade to ensure durability and rust resistance.
  • This is a long-lasting tree saw from a company known for producing high quality hand saws for trees.
  • COMFORTABLE TO USE: Small wood saw features a composite anti-slip comfort handle for reduced hand fatigue.
  • Plywood hand saw has Great Guard coated blade to reduce friction.
  • Fast and comfortable hand saw for woodworking.
  • EASY TO USE: Our handsaw for wood features built-in 45° and 90° angle markings for guided cutting as well as a 17 inch ruler on the back of the manual saw for measuring and accurate cuts.
  • Make quick, precise cuts with this handsaw for trees.
  • WIDELY USEFUL SAW: Our hand saws for cutting wood also tackle a variety of other cutting tasks.
  • Use it for gardening, cutting tree branches, even cutting PVC pipe.
  • Cuts fasters than other saws, stays sharp, and stands up to all sorts of cutting tasks.
Check Stock

SKIL 75740W 7-1/4-Inch 40-Tooth Carbide Tipped Circular Saw Blade for SKIL Circular Saw 5280-01/5180-01/5080-01

  • Carbide teeth can last up to 60 times longer than standard steel blades.
  • Compatible with 7-1/4" diameter circular saws 5280-01/5180-01/5080-01.
  • Included components: 7-1/4-Inch 40-Tooth Carbide Tipped Saw Blade.
  • Enjoy smooth cutting performance for framing and general-purpose cutting with the Skil 40-Tooth Carbide-Tipped Saw Blade. It comes with sharp cutting edges and induction hardened teeth for durability. This 7-1/4" circular saw blade fits most standard circular saws. It comes with a clear, anti-stick coating that helps reduce friction and binding during use. The Skil saw blade also comes with a 5/8" diamond knock-out arbor to make installation and removal easy..
Check Stock

KAKURI Azebiki Japanese Saw for Woodworking 3-1/2" Made in JAPAN, Japanese Curved Hand Pull Saw for Hole, Mid Panel, Groove Cutting, Ryoba Double Edge Blade for Rip & Crosscut

  • JAPANESE AZEBIKI SAW: Azebiki Saw is used to cut holes, mortises, grooves in mid-panel, and sliding dovetails. These saws are also useful for working in restricted areas without damaging adjacent work—Japanese essential carpentry tools..
  • UNIQUE ROUNDED BLADE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
  • RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
  • RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
  • PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", ....
Check Stock

HACHIEMON Japanese Ryoba Pull Saw Double Edge Hand Saw 180mm (7 Inch) for Woodworking Compact and Smoothly - MOROTEGAKE -

  • This is a saw for craftsmen made using traditional Japanese methods "MOROTEGAKE"..
  • The vertical lines on the surface of blades made with the "MOROTEGAKE" technique reduce the drag of each stroke and smoothly remove shavings..
  • The double bladed saw has a ripping blade and a crosscutting blade..
  • Blade length: 7.1 inches, total length: 17.7 inches, weight: 3.85 ounces. Made in Japan..
  • [Important] Japanese saws are pull saws. If you try to saw in a pushing motion the blade may be damaged..
Check Stock

Acrylic Table Saw Protective Cover - Blade Guard for 4-10in Woodworking Saws

  • Keep your table saw blade clean and protected with this acrylic protective cover. Its transparent design allows you to easily see what you're working on, while the R-type material splitting knife makes operation more convenient and efficient..
  • This protective cover is easy to install, saving you time and effort, and it's suitable for table saws with a blade size of 4-10 inches. Its durable acrylic material won't deform easily and will last for a long time..
  • Protect your table saw from dust and dirt with this innovative protective cover. Its transparent design lets you see inside the cover, making it easy to work with, while the R-type material splitting knife allows for s mooth operation..
  • The table saw protective cover is quick and easy to install, and it's suitable for table saws with a blade size of 4-10 inches. Its high-quality acrylic material is resistant to deformation and will last for a long time..
  • This protective cover is the perfect accessory for your table saw. Its transparent design allows you to see inside the cover, while the R-type material splitting knife makes operation more convenient and efficient. Its durable acrylic material is resistant to deformation and will last for a long time. It's also easy to install and fits table saws with....
Check Stock

Stand Table Saw Protective Cover-Table Saw Protective Covers-Table saw dust cover-table saw blade guard-Anti Dust Case Clear Plastic Guard for 6-12 Inch Saw (R-shaped universal 6-10in)

  • protective cover for 6-12 inch table saw and other saws.According to the size of your saw or the diameter of the exposed saw to choose the right, dividing knife can be adjusted up and down the height..
  • The saw blade dust cover prevents wood chips from flying around when cutting wood, Collect of above-table dust.
  • Table saw blade guard With Dispensing Knife: With dispensing tool which is helpful for woodworking..
  • Independent lateral slides minimize blade exposure,Practical tool parts for workers, make the machine more durable..
  • Size: 7-10 inch table saws 42cm x 22cm, 11-12 inch table saws 45cm x 22cm, dust collection port diameter 32mm.
  • Please check the product information and picture information before you buy, whether it is suitable for your table saw.
Check Stock

Festool Plunge Cut Track Saw TS 55 FEQ-F Plus FS w/55" Guide Rail

  • The Festool TS 55 is not your standard circular saw. The saw rides on a guide rail, or track, providing accuracy and versatility allowing it to replace the world's most advanced cabinet saws, miter saws and panel saws. The TS 55 track saw delivers precise, splinter free, glue ready cuts and only takes seconds to setup. Breaking down sheet goods? Cuts at an obscure angle? No longer is there a need to design a complex jig or move heavy material to your large shop equipment..
  • The TS 55 track saw works seamlessly with it's integrated rail, available in various sizes. Utilize the rail and saw with or without a table or work surface. The track saws flat housing allows for flush cutting..
  • Concentrated torque and up to twice as fast work progress with an increased saw blade service life..
  • Virtually splinter-free on both sides thanks to attachable splinter guard..
  • The cutting edge from 90° to 47° remains unchanged even when the saw bevels..
Check Stock

Diablo D0641X 6-1/2 by 40 Finishing Saw Blade 5/8-Inch Arbor (6 Pack)

  • Bundle Includes: 6 x Diablo 6-1/2 inch x 40-Tooth ATB Precision Finishing Saw Blade.
  • TiCo Hi-Density Carbide Teeth: TiCo Hi-Density Carbide specifically designed for each application to provide maximum performance and cutting life.
  • Laser-Cut Stabilizer Vents: Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp.
  • Perma-Shield Coating: Perma-Shield non-stick coating reduces gumming, rusting, and corrosion.
  • Compatibility: This advanced laser-cut blade features a thin kerf, making it ideal for portable and low-powered saws on the job site. It is suitable for remodeling/demolition and siding/decking projects. This trim saw blade is proven to extend run time on Porter Cable, Saw Boss, and similar trim saws.
Check Stock