Top Saw Guides Reviews

Bora WTX Clamp Edge 4 Pc. Set, 50” + 24” Clamps + 50” Extension + Saw Plate

Set includes a saw plate, 24-inch and 50-inch clamp edges, and 50-inch extension that can be attached to either clamp edge.
Ridged aluminum straight edge guides make straight, accurate track saw like cuts.
Clamp edge features a soft-grip, non-marring rubberized clamping pad securely grips all surfaces.
Saw plate fits left or right handed circular saws and can be used on clamp edges up to 3-1/2 (89mm) inches wide.
Use the saw guide with your circular saw to cut with unmatched precision, or used for free hand cutting with the plate attached.

Check Stock

HYCHIKA Cordless Circular Saw,20V Mini Circular Saw with 4.0Ah Battery，3 Blades(4-1/2',4-9/10'),3500RPM Max Cuting Depth:90°(48mm)/45°(32mm),Compact Circular Saw for Wood, Plastic and Soft Metal

...】 Use the easy-to-operate cordless circular saw equipped with a 4.0 high-capacity battery and charger for a quick 2-hour recharge. With a no-load speed of up to 3,500 RPM, it gives you the maximum workload for most projects on your jobsite..
【Precise Cutting】The circular saw is equipped with graduated parallel guides and laser guides to ensure fast, accurate and professional straight cuts.
the free vacuum tube can be adapted to a hoover, which can effectively prevent wood chips from flying and maintain a clean working environment..
【Safe Cutting】 The soft rubber handle is non-slip to maintain good stability and clamping force.
double safety switch is enabled to increase the safety of operation and use.
aluminium protective cover enhances durability and extends the power life of the electric circular saw..

Check Stock

Koatukys 12 inch x 7/8 inch x .095 inch Band Saw Tires Replacement for 12\ Craftsman, Grizzly, Powermatic bandsaw (2/Pack)

Contains: 2 guide blocks 13/64″ square x 13/16″ and 2 guide blocks 13/64″ square x 1″. Please note the actual dimensions of the Cool Block can be smaller than its nominal dimension by up to 0.05″. For example a 1/2″ Cool Block may measure 0.45″. This is to allow for expansion due to humidity..
For 9″ 2 Wheel Band Saws such as Ryobi, Black & Decker, Sears Craftsman, ProTech, Trademaster, and Collins, etc..
Cool Blocks Band Saw Blade Guides replace standard metal or plastic guides and enhance cutting performance!.
They lubricate the band saw blade but do not make it oily..

Check Stock

POWERTEC 71409 Quick Screw Guide Rail Clamp for MFT and Guide Rail System 7” Capacity x 2-3/8” Throat Depth – 2 Pack

INCLUDES: (2) Quick Screw Down Clamps with 7" Max Opening, 2-3/8" Throat Depth.
PREMIUM DESIGN: Features high quality and ergonomic plastic clamp handle grips for quick and comfortable tightening, without the splinters from cheap....
SUPERIOR CLAMPING FORCE: Delivers consistently secure placement and safe clamp action for a seamless workflow.
VERSATILITY: These rail clamps provide a portable clamping option for Festool, Makita, Bosh and similar sized track saw guides, perfect as MFT clamps....
PLEASE NOTE: The clamp ends have a specific profile, see the image for details. They are designed to work with MFT tables, the track saw guides listed....

Check Stock

POWERTEC 71410 Quick Screw Guide Rail Clamp for MFT Table and Guide Rail System, 5-3/8” Capacity x 2-3/8” Throat Depth – 2 Pack

INCLUDES: (2) quick screw down Clamps with 5-3/8" Max opening, 2-3/8" Throat depth.
PREMIUM DESIGN: features High quality and ergonomic plastic clamp handle grips for quick and comfortable tightening, without the splinters from cheap wood.
The steel pressure pads are completed with removable non marring plastic.
SUPERIOR CLAMPING FORCE: delivers consistently secure placement and safe Clamp action for a seamless workflow.
VERSATILITY: These rail clamps provide a portable clamping option for Festool, Makita, POWERTEC 71572/ 71573 track saw guide rails and similar sized track saw guides, perfect as MFT clamps for your homemade workbench, and fits in some heavy duty T-slots (see image for size).
PLEASE NOTE: The clamp ends have a specific profile, see the image for details. They are designed to work with MFT tables, the track saw guides listed and some heavy duty t-tracks with an opening of at least 9/32”. They will not work in universal or ¼” t-track. Please check the size of your t-track to verify that the clamps will work for your application..

Check Stock

Olson Saw AC70010 Saw Blade Lubricant Stick Stone for Band Saw Blades

Prolongs blade life and produces smoother and quicker cuts.
Keeps metal, plastic and wood cutting blades from clogging with wood chips or pitch.
For power and hand held cutting tools including band, scroll, circular, hack and jewelers saw blades.
This wax stick is specially formulated to keep metal, plastic, and wood cutting blades from clogging because of chips or pitch..
Push stick into moving saw blade so that teeth are thoroughly coated..
The wax will flow when saw blade becomes warm, keep the blade clean and prevent clogging..
This adds to the life of the blade and produces easier, smoother and quicker cuts..
If using Cool Blocks replacement band saw blade guides apply lubricant stick only to tooth tips..

Check Stock

Milescraft 4021 TrackClamps - Universal T-Track Hold Down Clamps (2 pack)

Thin, low profile, light duty clamp fits nearly all T-Tracks.
Non-marring swivel pad prevents damage to finished workpieces.
For Use With: T-Tracks , Track Guides, Saw Guides.

Check Stock

SKILSAW SPT79-00 15-Amp Medusaw Worm Drive Saw for Concrete 7

Worm drive geared concrete saw delivers a complete cutting system.
Cut-ready adjustable plunge lock and retractable front pointer guides saw along cut line and retracts for tight spaces.
Wet/dry dust management system controls dust for cleaner cuts.
Gfci protection reduces risk of shock to user.
Rust resistant brackets and fasteners protects against corrosion.

Check Stock

Bessey One Hand Trigger Clamps Medium EZR-SET

Set of 2 Track Clamps 6" Capacity Throat Depth 2 3/8" for use on track saw guides, 100 lb force.
Quick clamping, smooth operating, consistent clamping force for track saw quides & general clamping /spreading.
4 5/8" to 12 1/8" spreading capacity, simple push button for reversing fixed jaw for change to spreading, no tools needed.
V-Grooved, non marring pressure pads included.
"Step Over" design jaw allows clamping over obstructions, includes ergonomic comfortable soft grips for easy clamping.

Check Stock

Chain Saw, Gas, 14 In. Bar, 30.5CC

...ing tools inner pouch bag for easy access to included tools.
[Store Your Chainsaw]: 35 x 6 x 11-inch (89 x 15 x 28 cm) overall chain saw case size holds 14, 16, or 18-inch (35, 40, 45 cm) gas-powered saws and battery-powered saws without battery installed.
[Use Easily]: Chainsaw file kit includes double-handled frame guides so you can steadily apply level, even pressure to prevent bending or breaking.
Chainsaw depth gauge tool and flat file make it easy to maintain proper cutter tooth height while screwdriver wrench allows for proper chain tension.
[Package Contents]: Chainsaw box case with chainsaw sharpening tool set includes 3 round saw files 5/32 (4.0mm), 3/16 (4.8mm), 7/32-inch (5.5mm), 3 double-handle file guides 5/32, 3/16, 7/32-inch, (1) 6-inch flat file, (1) 0.25-inch (0.63mm) depth gauge tool, (1) 13mm/19mm wrench screwdriver, 1 chainsaw accessories zippered pouch, and 1 chainsaw storage case.

Check Stock

IDEAL Electrical 36-311 TKO™ 4 Pcs Hole Cutter Kit – Carbide Hole Cutter Set Smooth Start Pilot Bit Carry Case

Superior Performance: TKO carbide tipped hole cutters provide the most precise and clean hole saw and knockout replacement in the industry with....
Precise Design: The hole saw cutter has ground carbide teeth made from high quality HSS producing clean, burr-free holes. The carbide cutter includes....
Smooth Cutting: The innovative design includes a SmoothStart pilot drill which guides the cutter to the surface, avoiding damage to the cutter and....
Convenient Usage: The carbide tipped cutting hole saw has an integrated arbor for solid rotation providing smooth accurate holes without chattering.....
Product Specifications: The TKO carbide tipped hole cutter kit is supplied with SmoothStart replacement tip, 7/8 in., 1 1/8 in. and 1 3/8 in. diameter....

Check Stock

Delmar Tools Patented Push Block For Table Saws, Makes Narrow Rip Cuts Safe And Easy, Helps Prevent Kickback

...r hands above and away from the saw blade..
THE BEST TOOL FOR EFFECTIVELY RIPPING THIN STOCK ON THE TABLE SAW- Unlike cumbersome push sticks and feaher boards, this push block design distributes even and accurate pressure to both sides of the stock for fluid rip cuts. This push block grips both side of the stock and guides it through the table saw cut while safely keeping your fingers and hands out of the way. Eliminates those dangerous close calls with your fingers by the saw blade on narrow rip cuts!.
USER FRIENDLY ADJUSTMENTS TO SET UP EACH RIP CUT- Adjustable center leg is easily adjusted by rolling a wheel with your thumb to set up different width cuts. Innovative balance wheel is deployed via a button to deliver stability on narrow cuts. No annoying thumbscrews that have to be loosened and tightened for each cut..
COMES FULLY ASSEMBLED, NO INSTALLATION NECESSARY- Arrives ready to go right out of the box, no frustrating assembly required. Other push blocks require frustrating installation with tons of moving pieces.
LIFETIME WARRANTY- Delmar Tools includes a lifetime warranty on this pushblock. Any issues down the line and you will be covered for a free replacement or a refund..

Check Stock

Cramer 40407US Silicone Profiling Kit7 – professional Caulking Tool Kit with Sealant Finishing Tools and Caulk Removal Tools – easy silicone caulking with guides

The Original: CRAMER Profiling Tools – made in Germany. Professional Tool Kit for removal and renewing silicone joints. Kit contains 5 sealant finishing tools, 2 guides and a caulk removal tool with 3 interchangeable metal blades. Everything in a practical storage box..
Removal of old sealant: Old silicone joints can be removed with the CRAMER silicone removal tool and the saw blade, for residues use the scraping blade (incl. replacement blade)..
Simple silicone caulking with guides: 5 sealant smoother with 16 needed profile variants and 2 guides. The cleverly attached guides help bridging intersections and prevent any subsidence when working at these intersection grout lines. All sealant tools have tool edges at 90° angle: The only way to ensure that the corners are also properly grouted!.
Processing without soapy water: The caulking is carried out much easier in small sections – additionally, blemishes can be simply reworked without removing the existing joint..
With this Kit the most complex silicone profiling becomes child's play. Delivered in a practical plastic box – all tools stored in one place, so that nothing gets lost!.

Check Stock