Top Sanitary Ferrule Reviews

Stainless Steel 316 SS316 Sanitary Fitting Diameter 51MM 2 Weld Pipe with 64MM Ferrule Flange fits 2 Tri Clamp

  • Stainless steel 316 for resistance to corrosion and high temperatures.
  • Maximum operating pressure rating of 250 psi at 70 degrees F ambient temperature.
  • Ferrule fitting for providing a seal when compressed between two mating components.
  • Attaches to a fitting to help provide a leak-resistant seal on a tube or hose.
  • This long weld clamp ferrule sanitary fitting is suitable for use in food, beverage, and dairy applications.
Check Stock

QiiMii 1.5' Tri Clamp Tri Clover Fittings To NPT (3/4') Male Thread Adaptor SS304

  • Ferrule Size: 50.5mm, and fits 1.5" Tri-clamp.
  • Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.
Check Stock

DERNORD Tri Clamp In-Line Sight Glass with Flow Sanitary Straight Sight Glass SUS316 1.5 Inch Tri Clamp Clover Type (Flow Pipe OD 38MM)

  • In-line Sight Glass Flow Pipe OD:38MM, Ferrule OD:50.5MM, Fits Tri-clamp:1.5".
  • In-line Sight Glass Max Pressure: 120 PSI,Max Temperature: 300 Fahrenheit.
  • In-line Sight Glass with Clamp End, SUS316 body material.
  • Full bore design,Sight Glass Flow Indicators provides a full 360 to observe fluid flow in any direction. Can be used in vertical or horizontal position.
  • The Sanitary Sight Glasses are designed for sanitary applications used in the food, dairy, and pharmaceutical industries.
Check Stock

Eliseo 1.5'' Sanitary Tri-Clamp, 304 Stainless Steel Single Pin Heavy Duty Tri Clamp Clover with Wing Nut for Ferrule TC 1.5''(4 Pack)

  • 【PACKAGE INCLUDE】: 4 Pack 1.5 inch single pin tri clamp with 4 Pack tri-clamp rubber Gasket.
  • 【SANITARY CLAMP SIZE】Tube OD: 1 Inch to 1-1/2 Inch, Tri Clamp: 1.5inch, Ferrule Size: 2inch (50.5MM).
  • 【HEAVY DUTY TRI-CLOVER CLAMP】Tri-Clamp made of 304 stainless steel, higher corrosion resistance than the 302 grade stainless steel, ideal for most intended tri clamp fitting connections.
  • 【WING NUT STYLE SINGLE-PIN CLAMP】The wing nut style tightening screw allows for quick and easy assembly without tools.
  • 【SANITARY FITTING FOR HOME BREWING】Single hinge clamp is widely used in beer, beverage, pharmaceutical and chemical industry.
Check Stock

1.5\ Tri Clamp Ferrules, SS304 Long Weld Clamp Ferrule for Sanitary Fittings 2PCS

  • Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Fit for all other homebrew stuff sanitary fittings..
Check Stock

flowmavin 1.5 inches Tri Clamp Tee 3 Way Sanitary Fitting Stainless Steel 304 Mirror Polished, 38mm Pipe OD.

  • Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Fit for all other homebrew stuff sanitary fittings..
Check Stock

TAISHER 2PCS 1.5\ Tri Clamp to 3/4\ NPT Male Stainless Steel Sanitary Fitting Home Brew Connector (Ferrule OD 50.5mm)

  • Product Type —— Tri-Clamp xMale NPT Adapter(Thread:1/2"Male NPT,Ferrule OD: 50.5mm).
  • Product Material —— 304 stainless steel strength and resistance to corrosion..
  • Special Feature —— Two fittings are clamped together with a high temp silicone gasket in between.
  • Suitable Size —— Suitable for 1.5" Tri Clamp / Clover / Sanitary..
  • Application range —— Used for food, beverage, and dairy applications..
Check Stock

Metaland 2' Tri Clamp Clover, Stainless Steel Single Pin Heavy Duty Sanitary Tri Clamp Clover for Ferrule OD 64mm (Pack of 2)

  • 【Material】Stainless Steel 304, Internal and External Polished. 100% suitable for sanitary purpose, seamless construction for greater burst strength..
  • 【Size】2 Inch Tri Clamp (For Ferrule OD 64mm).
  • 【Come with Silicone Gasket】Buy clamp and get same quantity free silicone gasket..
  • 【Application】Apply for food and beverage, manufacturing, medical industries, chemical processing, aerospace and automotive..
  • 【Quantity】Package including 2pcs tri-clamp clover and 2pcs silicone gasket..
Check Stock

Fermentation tank with cooling coil for home brewing 35liters Stainless steel conical fermenter chiller

  • ● Easy and Convenient for home beer & wine & milk,The first & second steps fermentation. All major parts are made of SUS304 Stainless steel material..
  • ● Stainless steel cover with seal ring and Airlock.
  • 1mm thickness liquid tank of full 35 liters capacity (Usaged liquid volume is 30 liters .) and ●With sanitary tri-clamp ferrule set for the lid which canbe better sealed the tank for storage ofmany kinds of liquid kinds of liquid.
  • ● 0-50C removeable thermometer 6 locks on body to tighten lid.
  • This fermenter is suitable for fermenting various kinds of wine/beer / fruit enzyme..
  • ● With 8M SUS304 cooling coil(Chiller),.
Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....
Check Stock

Compression Sleeve Puller (4661) - Remove Nut & Ferrule Of Pipe - Ferrule Puller For 1/2” Copper Water Compression Sleeve - 1/2-Inch Copper Tubing - Plumbing Tools Compression Ring Removal Tool

  • Saves A Lot Of Time--This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. Saves a lot of time around cutting old pipes..
  • Make Your Life Easy--This compression sleeve puller removes 1/2-inch copper water compression sleeve. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • Operating Steps--Method 1: Only remove the ferrule---Let the ferrule in between the red notched end of the tool (notched clamping ferrule). Method 2: Both remove the compression nut and ferrule---Place red notched end of tool behind compression nut. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Easy and fast solve the problem of compression valves failing with small leaks.Ideal for working on frozen or corroded supply stops,corrosion resistant &....
Check Stock

Rishine Yoga Pants with Pockets for Women, High Waist Tight Fitness Leggings Workout Elastic Quick Drying Sweatpants Black

  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to.
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resista.
  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
Check Stock

ULTECHNOVO 10pcs Propane Natural Gas Connector 8mm Gas Pipe Fittings Brass Tube Fitting Adapter for Home Kitchen

  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to.
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resista.
  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
Check Stock