Top Sanding Disc Table Saw Reviews

CMT 299.112.00 10' Table Saw Balance Blade & Sanding Disc Set 5/8' Bore

Table saw balance blade and sanding disk set.
Mount the balance blade and sanding disk in your table saw and line it up with a square for accuracy.
Remove the balance blade and mount your saw blade for true and precise cuts.

Check Stock

CMT 299.111.00 8' Table Saw Balance Blade & Sanding Disc Set 5/8' Bore

Table saw balance blade and sanding disk set.
Mount the balance blade and sanding disk in your table saw and line it up with a square for accuracy.
Remove the balance blade and mount your saw blade for true and precise cuts.

Check Stock

XtremepowerUS 1\ X 30\ Belt / 5\ Disc Sander Polish Grinder Sanding Machine Work Station

?Multifunctional Use - With a powerful motor, it can be used for small & large sanding operations on various materials. It can intricate contour sanding and shaping to fast stock removal.
?High Quality Material Tool - Disc sander is made of heavy duty steel. Durable and can be used for a long time. There is also a strong base on the disc sander, which can prevent any heavy vibrations when you operate. It provides extra stability and safety.
?Convenient and Simple Design - Both belt & disc sanding tables can tilt 45 degrees. It is also equipped with the quick-release belt tension lever, which is easy & quick for you to change the belt. It makes your work more convenient.
?Dust Collection Port - Our disc sander is equipped with a dust collection port, which can minimize clean-up of saw dust and debris. It can keep your work environment more clean.
?Easy to Assemble - All assembly hardware is included in the package. Clear & brief instruction make it much easier to put together. And no professional tools are needed, which can save much time for you.

Check Stock

RIKON Power Tools Professional Power Tools 6\ x 48\ Belt with 10î Disc Sander, 50-122

HIGH POWER - This large 1HP motor delivers superior power for driving the sanding belt and disc without stalling..
BELT AND DISC SANDER - With a 6” x 48” belt and 10” disc this sander from Rikon Tools has the strength and capacity to complete all of the sanding you may need..
TILTING - The disc table for this sander tilts 0-90 degrees allowing precise sanding of even the sharpest angles..
ADJUSTABLE - The belt can be adjusted from the horizontal to vertical position for whatever your work needs may be..
SPEED - This high speed sanding disc can reach the speed of 2510 RPM, and the belt speed maximum is 1836 FPM..

Check Stock

WORKPRO Disc Belt Sander, 1 in. x 30 in. Belt & 5 in. Sanding Disc, Power Combination Sander for Woodworking, including 6pcs Sandpapers

Belt & Disc Sander：This combination sander is professional for your woodworking, including 1 x 30-inch belt and 5-inch disc, with extra 3pcs 100-Grit belts and 3pcs 80-Grit discs, which can be used for sanding projects on various materials..
Adjustable Easily: The sanding disc work table can be adjusted from 0 to 45 degrees to meet your different angle needs. Using it with miter gauge is suitable for contour sanding and shaping. Great sanding tools for woodworking and all your DIY needs..
Powerful Sander: The benchtop belt/disc sander is driven by motor directly, providing 3160FPM of belt speed and 3450 RPM disc speed, which shows powerful performance than traditional design..
Sturdy Cast Iron Base: This sanding machine is equipped with sturdy cast iron base that could fix on the workbench to prevent vibrations, providing stability and improving work efficiency..
2 Dust Ports: This belt&disc sander is equipped wit 2 dust ports, collecting the dust from belt and disc, which can keep your work environment more clean. Note: belt/disc dust port size is 1.7inches (outer) and 1.5inches (inner)..

Check Stock

BUCKTOOL Combo 1' x 42' Belt Sander 8' Disc sander, Knife Sharpener with Large Work Table, Professional Bench Belt Disc Sander with 3/4HP Direct-drive 5.0A Brushless Motor for metalworking, BD1801

POWERFUL DIRECT DRIVE MOTOR: 3/4HP 5.0A brushless TEFC motor provides up to 3150 FPM for the belt and 3450 RPM for the disc, faster removing and polishing metal.
MAINTENANCE FREE & EASY ASSEMBLE: The direct drive motor doesn't need maintenance like other belt-drive motors, and you only need to assemble the 2 worktables to set up this benchtop belt disc sander.
MADE FOR METALWORKING: Belt table was made of cast iron with smooth grinding surface, no damage over years. Also, the main parts of this sander are made of metal, solid and strong. Cast iron base, aluminum belt frame, and all the handles are made of metal The aluminum sanding belt dust outlet can prevent melting when sanding.
EASY DISC & BELT REPLACING: Quick belt changing system helps you change belt in seconds.
Hook and loop disc paper makes change disc not a pain anymore.
MULTI-ANGLE SANDING: The spacious sanding disc work table can adjust from 0 to 45 degrees to meet your different angle needs.

Check Stock

Bucktool 1x30 Inch Bench Belt Sander with 5 Inch Disc with Wrench Storage and Easy Belt Cover Off, 1/3HP Direct Drive Benchtop Belt Disc Sander for Woodworking

USER-FRIENDLY DESIGN: Compared to other similar belt disc sanders, the Bucktool 1x30 belt sander has a more convenient one-button belt cover take-off design and wrench storage.
COMPACT BELT DISC SANDER: This benchtop belt disc sander equips with a 1x30-inch belt and 5-inch disc, satisfies all kinds of regular sanding needs.
EASY BELT CHANGE: The easy-remove belt cover and quick belt release system makes belt changes ever fast.
POWERFUL MOTOR: 1/3 HP 2.3A motor provides 3590 RPM speed, 25% more sanding efficiency than belt-driven motor.
MULTI-ANGLE SANDING: the work table for sanding disc can be adjusted from 0-45 degrees for your different angles sanding needs.

Check Stock

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw Fence Bar – Table Saw Gauge 18 Inch

MAKE ACCURATE CUTS: The DCT | Table Saw Miter Fence with Miter Bar Gauge & Flip Stop offers safety and accuracy when cutting or sanding precise,....
USE YOUR TABLE SAW: 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact....
NO MORE PLAY: 18-inch (45.7cm) long fence bar has 8-inch (20.3cm) usable length after fence starts.
Bar is 3/8-inch (9.5mm) thick x 3/4-inch (19mm)....
BUILT TO LAST: Flip stop slides effortlessly along the fence and locks in place with the plastic tightening knob for quick adjustment while the flip....
PACKAGE CONTENTS: Table saw accessories package includes (1) table saw precision miter gauge, (1) fence, (1) flip stop, and necessary saw miter gauge....

Check Stock

BUCKTOOL 5.0A Belt Disc Sander 4 in x 36 in Belt and 6 in Disc Sander with 3/4HP Direct-drive Motor and Portable Al Base, BD4603 Upgraded Model

MAINTENANCE-FREE: This sanding belt and disc were directly driven by the motor shaft, you need not adjust the belt tension, and you don't have to change the damaged belt like before.
INCREASE EFFICIENCY: The motor direct drive design is 25% more efficient than the traditional design, it can maximize the development of 3/4 HP fully enclosed induction motor, providing quiet but powerful performance.
MULTI-ANGLE SANDING: The belt can tilt from 0 to 90 degrees for horizontal and vertical sanding to meet your project, and the driven drum allows for sanding of curved work-pieces, it has a quick sanding belt replacement design & track control function.
TWO CAST AL WORKTABLE: Equipped with two cast aluminum workbenches for more convenient sanding, and the sturdy cast aluminum base with rubber foot prevents vibrations, to ensure a better experience, we suggest matching with our Y-Fitting Hose.
TWO-IN-ONE SANDING MACHINE: This sander meets CSA standards, two-in-one sanding machine includes both a 4 x 36-inch belt and a 6-inch disc, the angle adjustable work table with miter gauge can be used on both sanding disc and belt.

Check Stock

BUCKTOOL Dual Speed 1" x 42" Belt Disc Sander Combo, Bench Knife Sharpener with Large Work Table, Professional Benchtop Belt Sander with Direct-drive 4.8A Brushless Motor for Metalworking, BD1801DS

DUAL SPEED DIRECT DRIVEN MOTOR: 4.8A brushless induction motor can provide 1750 & 3450 RPM speeds for your different needs, 25% more sanding efficiency than belt-driven motor.
MAINTAINANCE FREE & EASY ASSEMBLE: Unlike other belt-driven motors that need yearly belt change, the brushless induction motor do not need maintenance, and you only need to install 2 work tables, then the bench belt sander will be ready to work.
MADE FOR METALWORKING: From work tables to the machine base, and even the belt frame and dust ports are made of metal, this benchtop belt disc sander is just born for metalworking like knife making and all metal polishing.
EASY BELT DISC CHANGE: The easy-remove belt cover and quick belt release system makes belt changes ever fast. Hoop & loop design sanding disc makes disc replacement super easy and does not need to use glue anymore.
MULTI-ANGLE SANDING: the work table for sanding disc can be adjusted from 0-45 degrees for your different angles sanding needs.

Check Stock

Cutting Discs, Flap Discs, Polishing Discs HSS Circular Saw Blade Set with a Mounting Mandrel 3/8" & 1/4" Arbor Hole for Die Grinder Rotary Tool Cutting Polishing Grinding Metal 21 Pack

Components include 10 x cutting discs + 5 x flap discs + 3 x wool felt discs + 2 x HSS circular saw blades + 1 x Mounting Mandrel.
Flap disc: it is made of high quality industrial grade blue cubic zirconia for strength, durability and longer life. The 80 grit is coarser and is ideal for heavier removal and sanding..
Cutting disc: copyrighted combination of aluminium oxide grit for aggressive cutting. Thin 0.1 cm cutting wheel design for fast cutting..
Wool felt disc compressed wool felt, which is environmentally friendly, robust and wear-resistant with a longer service life. Smooth and bright polishing effect, making it suitable for the fine surface..
HSS circular saw blade: it is made of strong high speed steel, saw blades are sharp and tidy. New composite anti-wear coating technology, improves surface hardness and blade life..

Check Stock

6' X 48' Belt and 9' Disc Combination Sander with Cast Iron Stand, 80-grit Sanding Belt and 80-grit Sanding Disc; 110V, 8 Amp

2-position table tilts from 0 to 45 degrees.
Table can be repositioned for use with belt or disc.
Miter gauge (0 to 45 degrees left/right).
Includes floor stand, 80-grit sanding belt and 80-grit sanding disc.

Check Stock

Wish You Were Here

⭐UNIVERSAL FIT:Switch 489105-00 On-Off Toggle Switch For Compatible with Delta Table Saw.
⭐REPLACES NUMBE:Compatible with 31-695 Type 2 Sander 31-780 Type 1 Sander SA180 Type 1 Belt/Disc Sander 22-540 Type 1 12 inch Planer 22-560 Type 1 Planer 22-565 Type 1 Planer 28-150 Type 2 Band Saw 23-675 Type 1 Grinder / Finisher 14-650 Type 1 Mortiser LA200 Type 1 Lathe 31-325 Type 1 Grinder/Sander TS300 Type 2 Bench Table Saw TS350 Type 1 Bench Table Saw SH100 Type 1 Bench Shaper AP300 Type 2 Air Collector Management SA180 Type 2 Stationary Sander 34-670 Type 2 10 Inch Table Saw JT360 6".
⭐WORKS FOR BRANDS: Compatible with GR450 Type 1 8" 1 6"Tool-less Quick Change Variable-Speed Grinder TP305 12-1/2" Portable Planer DP300L 12" Crosshair Laser Drill Press 17-900 Type 2 16-1/2" Drill Press 36-600 Type 2 Table Saw 50-075 Type 1 Single Stage Collector 50-665 Type 1 1.5Hp 2 Stg Collector 14-070 Type 1 14" Floor Drill Press DP200 Type 1 10" Drill Press DP400 Type 1 Drill Press GR250 Type 1 6" Bench Grinder with Lamp 46-250 Type 2 Midi-Lathe 36-610 Type 2 Table Saw 36-380 Type 1 Xl-10.
⭐Specifications: Voltage: 125/250V Amperage: 20/12A Terminals: Two,On-Off Toggle Switch replaces Compatible with Delta 489105-00, 1343758 (Optional Lock).On-Off Toggle Switch re....

Check Stock