Top Saltwater Test Probe Reviews

API SALTWATER MASTER TEST KIT 550-Test Saltwater Aquarium Water Test Kit

Contains one (1) API SALTWATER MASTER TEST KIT 550-Test Saltwater Aquarium Water Test Kit, including 6 bottles of testing solution, 1 color card and 4 glass test tubes with cap.
Helps prevent invisible water problems that can be harmful to fish and cause fish loss.
Accurately monitors 4 most vital water parameters levels in saltwater aquariums: high range pH, ammonia, nitrite and nitrate.
Use for weekly monitoring and when water or fish problems appear.

Check Stock

4 Pieces Flexible Back Probe Pins with 4 mm Stackable Banana Socket for Car Repairing Electrical Testing

Quality conductivity material: the back probes use stainless steel as material which can performance well in conductivity, the bendable part is made....
Non dstructive: the test needle is flexible and can bent with different angle which adapt for measure hard to reach areas during testing.
Wide range of usages: the test probe suits well for standard 4 mm Banana plug test , it works with most test kits in the field, diagnostic devices,....
Size information: the size of the tipped tip probe is about 3.5 cm/ 1.4 inch, enough length to meet your needs.
It has very nice sensitivity, accuracy....
Package included: the package comes with 2 pieces black test probe pins, 2 pieces red test probe pins.
They are also the practical gift choice for....

Check Stock

Test Leads Set, 22 in 1 Multimeter Test Leads with Electrical Alligator Clips, Soft Silicone Test Leads Probes

digital Multimeter Test Lead Flexible Safety Specialties kit Probe Alligator Accessorie.
0.7MM-1MM Sharpeset test probe hook clip.
Full Insulated Safety Crocodile Alligator Clips.

Check Stock

Saltwater Pool Test Strips, Swimming Pool and Spa Salt Test Strips Kit for Sodium Chloride Content 0-8000 ppm, 25 Count

WHAT IS SALTWATER POOL : Saltwater pools are some pools which can create chlorine by adding salt in the pool water. Swimming in a saltwater may be better for someone who is uncomfortable to chlorine. However,it must be maintained regularly to keep clean..
WHY MEASURE SALT IN THE POOL: Most saltwater pool require a salt content of 1,500-4,500 ppm as sodium chloride (NaCl) in the swimming pool. If the salt concentration is too high, it can cause damage to saltwater pool. However, if the salt level is too low, this can lead to an unsafe swimming level as there won‘t be enough chlorine produced..
FAST TO TEST SALT FOR POOL: Immerse all the testing parts of the test strip into water for 1 second and take it out；Do Not shake excess water off , hold the strip horizontally for 5 seconds；Compare against the color chart and read immediately for accurate results. The ideal salt level for most saltwater pool is 3200 ppm. Before adding salt to your saltwater pool, test the water to check your salt level..
SPECIALLY FOR SALTWATER POOL: Each salt pool test strips is made of high quality PET paper that provides instant and reliable results. No need to shake the strip after dipping into water, just wait 5 seconds and faster to get results for your saltwater pool....

Check Stock

Goupchn High Voltage Oscilloscope Probe P4100 with Accessory Kit 100MHz 2000V 100:1

Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
High voltage probe can withstand 2000V. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
High voltage oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
Package includes: 1 x probe, 8 x marker rings, 1 x ground spring, 2 x ic test protection caps, 1 x adjustment tool, 1 x user manual..

Check Stock

Armada Technologies Pro48K Multi-Function Irrigation Test Kit with Tone Probe and Case

【Overload Protection for Longer Life】Auto circuit breaker protect the tool from overload through the inner circuit breaker to enables product last longer and durable..
【4 Adjustable Modes probe tester】AC detects the maximum and minimum voltage, supply frequency and duty cycle of the circuit under test.
DC detects the voltage value of the circuit under test.
In addition,the circuit tester can also detects the resistance between the circuit probe under test and the auxiliary ground.
Diode Test can quickly test the operation of the diode assembly and determines if it is conducting..
【Easy to Operate】Power probe built-in head light allow you to work in the dark area, there will be beep tone when detecting,operate the tool without looking at the menu once you are familiar with the tone.Provide 4.9ft of electrical wire for easy use..
【WIDE Vehicles Application】 Power probe tester can support 6-30V cars, boats, trailers, ATV, motor homes and many other vehicles. With the ability to power components such as radiator fans, starter motors, relays, window regulators, windshield wipers, etc. Powered by the car battery or cigarette lighter, no extra battery or cable required.
【3-YEAR WARRANTY Circuit Tester】 For damages caused by non-human factors....

Check Stock

Upgraded Diamond Tester Pen, Environmental Protection 9V Battery, High Accuracy Jewelry Diamond Tester, Professional Diamond Selector for Novice and Expert, Accuracy Jewelry-Tester Pen

...r, but also a multi gemstone tester. It can detect if a gemstone is real or fake, including: diamond, sapphire, ruby, crystal, agate, jadeite, and other precious stone of various sizes..
✔◇✔SIMPLE TO USE : Diamond Tester Pen is simple to operate to get results. 1. Put the battery in the tester. 2. Take off the probe cap. 3. Turn on the switch. 4. Make sure only one light lights up on the scale. 5. Make sure the " ready lamp" light is on. 6. (If test diamond, you then need to turn on the number of the light.
✔◇✔Before Test: 1. Put the battery in the tester. 2. Take off the probe cap. 3. Turn on the switch. 4. Make sure only one light light up on the scale. 5. Make sure the " ready lamp" light on. 6. (If test diamond, you then need to turn on the lights number corresponding to the indoor temperature and diamond weight.).7. (If test other gems, you'd better calibrate the probe, method: by placing the probe vertically on a glass, then adjusting the light to 5, then test the gems.).
✔◇✔NOTICE: * When testing, the probe needle and the tested object must be at a 90° angle. * When testing diamond, your right index finger must keep touching the metal panel on the back of the tester, while you do not touch the panel if you test other gemstones.....

Check Stock

CMTOOL Power Circuit Probe Kit 9-30V Automotive Circuit Tester, Test Light Automotive Relay Tester Kit, Car Electrical Tester Digital Voltage Tester Continuity Tester Tool with 6m/20ft Extension Cable

...on, 0-5V Power Supply, Fuel Injector Test, Positive/Negative Test, Setting, Online Update.【Test Applications】Continuity Test, Signal Circuit Test, Activate Components in You Hand/Vehicle/W/Ground, Check for Bad Ground Contacts, Follow&Locate Short Circuits, Trailer Lights and Connection Test..
2.【Power Circuit Probe Tester with Fast Intelligent Test】Automotive circuit tester can automatically identify the voltage value, resistance value, and positive and negative polarity of the detected circuit (red light is positive, green light is negative)..
3.【Automotive Circuit Tester with Digital Multimeter Mode】Automotive circuit tester contains the common parameters of multimeters, and can quickly test the DC voltage, resistance, and diode in the circuit system, current, and frequency, bringing a lot of convenience to users..
4.【Electrical Tester with Oscilloscope Function】Circuit probe tester with 6M extension test lead, can display the parameter curve diagram of the tested component, such as voltage, frequency, time, etc. Users also can observe the test results more directly by adjusting the displayed interval..
5.【Power Circuit Tester Kit with Component Activation Function】There is 4 activation modes for the component activation function o....

Check Stock

YCKYIGO Salt Water Pool Tester Large Range 7 in 1 Multi-Parameter Tester for Salt Swimming Pool and Spa

... 【Detects Free Chlorine Levels】The ORP value is a measure of the oxidative power or sterilization strength in water pool salt. The higher the ORP value in water, the stronger the oxidative power and sterilization ability. The ORP's can reflect the residual chlorine (FAC) levels in the Saltwater pool..
【Highly Sensitive PH Probe】A low pH means the water is acidic, which can be corrosive to pool equipment and pool surfaces. It may also cause skin and eye irritation. A high PH value can greatly reduce the effectiveness of chlorine and cause the water to become cloudy. To avoid problems, it’s important to try and keep it within the ideal range of 7.4–7.6. This PH test pen will do the job perfectly..
【Platinum Electrodes for TDS】Total Dissolved Solids (TDS) is a measurement of all dissolved solids in pool water. The higher the TDS reading, the harder it is to maintain clean, clear pool water. Pools with high TDS tend to have chronic issues with cloudy water. Keep in mind that saltwater pools will have a higher TDS level because of the higher salt content. The rule of thumb is that TDS levels should not be higher than 1500 ppm ab....

Check Stock

Fluke TLK282 SureGrip Deluxe Automotive Test Lead Kit

Kit includes insulation piercing clip set, automotive back probe pins (5), Suregrip silicone test lead set, Suregrip test probe set.
Also includes SureGrip alligator clip set, SureGrip large jaw alligator clip set, SureGrip hook clip set, soft case.
Use the back probe pins to slide into weather pack connectors on fuel injectors, TPS and Map sensors.
A hook probe with plunger actuation allows quick connection to pins or exposed conductors.

Check Stock

Brake Fluid Tester Pen with 5 LED Indicators Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid

... DOT3 DOT4 car brake fluid, and can be used by professionals and individuals.(If you turn on the switch and all the lights are on, please remove the battery and restart).
【Easy to use】This brake fluid test pen has 5 LED indicators to show the water content in the brake fluid. Press the top button and immerse the probe in the brake fluid. After a few seconds, the LED will display the test result. The brake fluid test pen will automatically turn off after approximately 15 seconds of inactivity. (Without battery).
【Reminder】The probe of this brake fluid tester pen is made of high-precision metal material, and the test is accurate. If you need to repeatedly measure, you need to wipe the probe clean before measuring. After you have finished using it, please clean the body and probe of the test pen. This will extend the life of the test pen..
【Friendly service】 Our products are shipped from the US warehouse. If the product you received has any quality problems, you can return or exchange it. If you have any questions, please feel free to contact us, we will reply as soon as possible..

Check Stock

Goupchn Universal P6100 Oscilloscope Clip Probes 100MHz with Accessories Kit 1X 10X 2 Pack

Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
Package includes: 2 x probes, 8 x marker rings, 2 x ground wires, 2 x ic test protection caps, 1 x adjustment tool, 1 x user manual..

Check Stock

Xinler Accuracy Jewelry-Diamond Tester Pen Professional Jewelry Diamond Tester Tool

... the diamond is true. * If the lights is about 9 and it beeps, it means the sapphire is true. * If the number is 6.5-7, it means the agate is true. * If the number is 7-8 , it means the crystal is true. * If the number is 6-7, it means the jade is true..
Before Test: 1. Put the battery in the tester. 2. Take off the probe cap. 3. Turn on the switch. 4. Make sure only one light light up on the scale. 5. Make sure the " ready lamp" light on. 6. (If test diamond, you then need to turn on the lights number corresponding to the indoor temperature and diamond weight.). 7. (If test other gems, you'd better calibrate the probe, method: by placing the probe vertically on a glass, then adjusting the light to 5, then test the gems.).
★ NOTICE: * No matter what gemstone you are testing, the probe needle and the tested object must be at a 90° angle. * When testing diamond, your right index finger must keep touching the metal panel on the back of the tester, while you do not touch the panel if you test other gemstones. * Do Not test any metal. * Do Not wear glove..
Product size: 16 * 4 * 2.2 cm. weight: 100g. Power needed: 1x 9V battery (not included). If you have any problem about the testing, please contact us, we would love to help..

Check Stock