Top Sae Washer Reviews

PEGGAS 7/8\ Shaft Vertical Pressure Washer Pump - 3000 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with 308653045, 308653093, 308653052, 308653078, GCV190, and more

  • Extend the life of your pressure washer: Save money by replacing your pump instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3100 PSI at 2.4 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Skip the Oil Change: This pump features a maintenance-free crankcase so you never have to change the oil. It is manufactured from fully anodized die-cast aluminum for protection against corrosion.
  • Extended durability: A Thermal Relief Valve (TRV) protects the pump from overheating while in bypass mode. The TRV releases small amounts of hot water and intakes cooler water to prevent overheating and extend the life of the pump.
  • Get the right pump for your machine: this pump is designed for gas-powered pressure washers with vertical engines. Its SAE bolt pattern,....
Check Stock

OEM Technologies 90029 Replacement Pressure Washer Pump Kit, 3400 PSI, 2.5 GPM, 3/4\ Shaft, Includes Hardware and Siphon Tube, for Residential and Industrial Gas Powered Machines

  • Extend the life of your pressure washer: Save money by replacing your pump instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3400 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Skip the Oil Change: This pump features a maintenance-free crankcase so you never have to change the oil. It is manufactured from fully anodized die-cast aluminum for protection against corrosion.
  • Extended durability: A Thermal Relief Valve (TRV) protects the pump from overheating while in bypass mode. The TRV releases small amounts of hot water and intakes cooler water to prevent overheating and extend the life of the pump.
  • Get the right pump for your machine: this pump is designed for gas-powered pressure washers with horizontal engines. Its SAE bolt patter....
Check Stock

Hard-to-Find Fastener 014973325527 Grade 8 USS Flat Washers, 7/16-Inch, 25-Piece

  • MATERIAL: MADE OF 304 STAINLESS STEEL, SMOOTH, NICE AND STRONG, NO RUST. HEAVY DUTY AND THICK WASHERS.
  • QUANTITY: 20PCS 1/2" USS 304 STAINLESS STEEL FLAT WASHERS IN ONE PACKAGE.
  • SIZE: INNER DIAMETER IS: 0.57" (14.6 mm) ,OUTER DIAMETER IS: 1-3/8" (34.8 mm), THICKNESS IS : 0.091" (2.3 mm) THESE ARE SAE FLAT WASHERS.
  • IDEAL FOR USE AT HOME, OUTSIDE, INDUSTRY PROJECT. GOOD REPLACEMENT WASHERS.
  • WE HAVE DIFFERENT SIZES SAE FLAT WASHER: #8, #10, 1/4.
Check Stock

AAA 90036 Horizontal Triplex Plunger Replacement Pressure Washer Pump Kit, 3200 PSI, 2.8 GPM, 3/4' Shaft, Includes Hardware and Siphon Tube, for Industrial Gas Powered Machines, Black

  • Extend the life of your pressure washer: Save money by replacing your pump instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3200 PSI at 2.8 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Adjustable power: This pump includes PowerBoost Technology that delivers higher pressure at the nozzle for a more efficient cleaning experience. There is also a hand turn knob that lets you reduce power at your convenience for tasks that require lower pressure.
  • Know when to change your oil: The sight glass and advanced oil seal technology eliminates the need for a dipstick. With visibility to the oil level and the oil itself, you can easily see when oil levels are low or if water has clouded the oil.
  • Get the right pump for your machine: this pump is designed for g....
Check Stock

8477 Piece Grade 5 COARSE ZINC Plated Bolt Assortment. Bolt, NUT, Washer and LOCKNUT. Comes with (2) 40 Hole Durham Bins. 1/4-3/4

  • What You Will Get: A variety of quantity to suit your needs, 197PCS heavy duty hex bolts +90PCS hex nut+90PCS flat washer+90PCS spring washer..
  • Heavy Duty: bolt kits are made of high quality materials carbon steel, with excellent anti-rust and corrosion resistance property, can be used in extreme environments..
  • 2 Kinds of Washers: washers designed to spread the load of screw fastening and prevent loosening in industrial, shop, automotive and home appliances.
  • Practical SAE Sizes: Use for fastening metal, wood and plastic materials together, includes sae sizes 1/4-20 x1/2" to 1-1/2", 5/16-18 x 3/4" to 2", 3/8-16 x 3/4" to 2".
  • Handy Kit: VIGRUE Bolt kit are stored in a transparent box organizer, convenient for your storage and use, handy for your daily reaching and putting away..
  • 2 Kinds of Washers Highly Compatible with Screws: washers designed to spread the load of screw fastening and prevent loosening in industrial, shop, automotive and home appliancesl.
  • nuts and bolts are the same matching size with washers and features a solid bearing surface to prevent nut/bolt head from tearing through applicable material.
Check Stock

Pressure Washer Pump Replacement, 7/8'' Shaft Vertical Pressure Washer Pump, Power Washer Pumps Replacement, 2400-2800PSI Pumps Replacement for Pump Pressure Power Washer

  • · Pressure Washer Pump - 2800psi, Max 2.5 GPM RATING, Fits 7/8" Shaft Vertical Axial Gasoline Engines in 4-7 HP - Such as some models of Troybilt, Ryobi, Generac, Briggs & Stratton,Devilbiss/Excell,Craftsman,Husky,Honda. Not fit all model series. Very Important - This pump is a heavy item. In order to save each other’s time and money, Please check the pump shaft size 7/8’’, the pump housing and mounting size, and the pressure power fit your machine or not before you place the order..
  • · Vertical Power Pressure Pumps COMPATIBILITY - 2400-2800psi,4-7 HP Max.#PowerStroke:PS262311,PS80944,PS80946#Excell:VR2522,VR2500,#Craftsman:580series#Ryobi:RY802700,RY8C2700,RY802700A,etc #Husky: HU80 series #Homelite UT80709 series.It can fit other type models. This pump not fit all series models, pls check your pressure washer’s mounting size, pressure power and shaft size before you buy. If you are not sure if your pressure washer would fit, please contact ' Amazon Customer Service'..
  • · Pressure Washer Pump Parts - Comes with Easy start valve (EZ), Thermal relief valve, Unloader & SAE gas engine flange, M22 outlet, Copper Nut 3/4 NH inlet, Keyway Stock..
  • · Universal Pressure Washer Pump Replacement✦This pump is a universal pressure washer pump replac....
Check Stock

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

  • EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
  • The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
  • Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
  • These tools make the job simple and prevent damage to your bearings when pulling.
  • Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
  • For removal only, not intended for installation.
  • FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
  • Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
  • Sizes permanently laser-etched on tool for easy identification.
  • Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
Check Stock

AS Headlight Assembly Compatible with 2007-2013 Toyota Tundra /2008-2017 Toyota Sequoia Chrome Housing Driver and Passenger Side

  • COMPATIBILITY: Headlight assembly compatible with 2007-2013 Toyota Tundra (fits headlight models without level adjusters) / 2008-2017 Toyota Sequoia (fits 12-14 headlight models without headlight washer).
  • BULB MODEL: low beam: H11, high beam: 9005, turn signal: 4157A. Bulbs not included..
  • BRIGHTER & WIDER LIGHTING: This upgraded headlight assembly allows for better visibility in any dim conditions, making your driving safer..
  • WEATHER-SEALED:The fully sealed structure improves the waterproof level and effectively prevents moisture from entering the interior of the headlight..
  • Pass DOT and SAE certification:High quality driver and passenger side halogen type headlights DOT and SAE stamped and meet all safety requirements..
Check Stock

For Ford Focus Windshield Washer Reservoir 2012-2018 | w/Pump & Cap | Inlet | Sedan | Filler Neck | Fluid Level Sensor Port | FO1288111 | CV6Z17618B

  • Exact fit to OEM#: CV6Z17618B and Partslink#: FO1288111.
  • Meets or exceeds DOT & SAE compliance standards.
  • With Pump | With Filler Neck, Cap and Fluid Level Sensor Port | Washer Reservoir.
  • FOCUS 12-18 WASHER RESERVOIR, Assy, w/ Pump, Inlet, Cap, and Sensor, Sedan.
Check Stock

ABN Lock Washer 720-Piece Assortment Kit – Metric 6mm, 8mm, 10mm and SAE 1/4in, 5/16in, 3/8in Star and Split Washers

  • SAVE TRIPS TO THE STORE: Use the ABN Lock Washer 720-Piece Assortment Kit – Metric MM #6, #8, #10 and SAE Inch 1/4″, 5/16”, 3/8” Star and Split Washers to replace broken or lost washers for applications that require added security.
  • Toothed star washers ensure grounding on electrical and can improve ground connections for a utility trailer, can be used in auto restoring applications to keep nuts from unscrewing, and on kitchen cabinet installation of handles and pulls to keep them from turning.
  • 3 STYLES IN 6 SIZES: Standard SAE and metric washer sizes measured from inner diameter (ID).
  • Exterior Star Lock Washers – (50) #6, (50) #8, (50) #10, (40) 1/4″, (30) 5/16”, (20) 3/8”.
  • Internal Star Lock Washers – (50) #6, (50) #8, (50) #10, (40) 1/4″, (30) 5/16”, (20) 3/8”.
  • Split Lock Washers – (50) #6, (50) #8, (50) #10, (40) 1/4″, (30) 5/16”, (20) 3/8”.
  • BUILT TO LAST: Constructed from steel with a zinc-plated finish for maximum strength, longevity, and resistance to rust and corrosion.
  • EASY STORAGE: Transparent 8.25” x 4.25” x 1.25” inch (21cm x 10.8cm x 3.2cm) clear plastic carrying case for easy transportation, safe storage, and quick organization.
  • (18) 1.25” x 1.25” inch (3.2cm x 3.2cm) divided co....
Check Stock

LUPANTER 1/4\ Stainless Flat Washers 100 Pack Made of 18-8 (304) Stainless Steel…

  • 【Size】--inner diameter 0.276-0.296 inch, outside diameter 0.620-0.640 inch, thickness 0.051-0.080.
  • 【Made of Stainless】 --- Completely and infinitely recyclable, stainless steel is the “green material” par excellence. good corrosion resistance, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects..
  • 【Widely Applications】 --- Also known as plain washers, their purpose is to distribute the fastener's load while reducing heat and friction during the tightening process. These general use flat washers are positioned under the head of a bolt or nut in order to provide a smooth bearing surface and distribute the fastener load over a wider area..
  • 【Reasonable Package】 --- Each type of the washer been packaged individually by small poly bag .You can easily take any type you want..
  • 【USA Standard】 ---The size and performance according to the American standard ANSI/ASME B18.22.1(SAE)., suitable for the SAE size screw and nuts..
Check Stock

LUPANTER 3/8\ Inch Stainless Flat Washers 100 Pack Made of 18-8 (304) Stainless Steel…

  • 【Size】--inner diameter 0.401-0.421 inch, outside diameter 0.805-0.827 inch, thickness 0.051-0.080.
  • 【Made of Stainless】 --- Completely and infinitely recyclable, stainless steel is the “green material” par excellence. good corrosion resistance, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects..
  • 【Widely Applications】 --- Also known as plain washers, their purpose is to distribute the fastener's load while reducing heat and friction during the tightening process. These general use flat washers are positioned under the head of a bolt or nut in order to provide a smooth bearing surface and distribute the fastener load over a wider area..
  • 【Reasonable Package】 --- Each type of the washer been packaged individually by small poly bag .You can easily take any type you want..
  • 【USA Standard】 ---The size and performance according to the American standard ANSI/ASME B18.22.1(SAE)., suitable for the SAE size screw and nuts..
Check Stock

The Hillman Group 830518 Stainless Steel 7/8-Inch Flat Washer, 10-Pack

  • Stainless Steel coating for a corrosion resistant finish.
  • SAE fine washers for coarse threaded bolts.
  • Washers are used to increase the pressure a bolt or screw provides.
  • Use a washer that is the same finish as your other fasteners.
Check Stock