Top Sae Metric Reviews

QISF Multi-Purpose 2 Pack Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth

【Function】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
【Material】--Stainless steel and chrome finish, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
/ 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
【Package】-- 1 x 58Pcs Blade Metric & America SAE Type & British Whitworth.

Check Stock

Gearwrench Set Mech Tool Bmc 1/4, 3/8, 1/2 219Pc (1 Each) 80940

Includes 3-Drawer Storage Box with Independent Sliding Draws, Side Flaps to Lock Draws in Place, a Steel Hinged Lid & Durable Handle.
Full Polish Chrome 1/4", 3/8" and 1/2" Standard Sockets, and 1/4" and 3/8" Deep Sockets.
Full Polish Chrome Metric and SAE Combination Wrenches with Offset Box End and Surface Drive Technology to Reduce Fastener Rounding.

Check Stock

Set of WHEEL BOLT PATTERN TEMPLATE TOOLS Measure Guides American & Import 4 5 6 LUG

RED SAE 5 LUG TEMPLATE4-1/4" 4-1/2" 4-3/4" 5" AND 5-1/2" BOLT PATTERNS.
ORANGE METRIC 5 LUG TEMPLATE100mm 112mm 115mm 120mm BOLT PATTERNS.
BLUE METRIC & SAE 4 LUG TEMPLATE98mm 100mm 108mm 110mm & 4-1/2" BOLT PATTERNS.
GREEN METRIC & SAE 6 LUG TEMPLATE127mm & 5-1/2" 6-1/2" BOLT PATTERNS.

Check Stock

GEARWRENCH 257 Pc. Auto TEP Intermediate Set - 83095

"84 tooth 1/4", 3/8" and 1/2" drive ratchets".
"Extensions – 1/4", 3/8" and 1/2" drive".
"Universal Joints – 1/4", 3/8" and 1/2"".
"Sockets – 1/4" and 3/8" drive in standard and deep, SAE and metric, 1/2" drive in standard length SAE and metric".
Wrenches – long pattern combination in SAE and metric sizes.
Pliers – 7 Pc. Set and Double-X, Punches and Chisels – 12 Pc. set.
General Purpose Tools – hacksaw, hammers, utility knife, flashlight, locking pliers, safety glasses, tape measure.
Automotive Specialty Tools – low voltage circuit tester, feeler gauge, gasket scraper, screw starters, brake tools, inspection tools, and more.

Check Stock

CRAFTSMAN Hex Key Set, Metric, Folding, 8 Keys (CMHT26007)

You will find hex key sets in SAE and Metric sizes in both folding and T-handle styles, both with comfort grip handles. The T-Handle design provides the most leverage by increasing torque. The 14 key T-handle set includes the most popular SAE and Metric sizes. A 25 key 3-pack comprises Metric, SAE and Star sizes in convenient folding handles..
DURABILITY: Durable composite construction.
SECURE GRIP: Rubber side inserts allow for a secure grip.
EASE OF USE: Chamfered edge helps guide the wrench for a smooth, easy entry into the hex key.

Check Stock

Kobalt 573356 200-Piece 1/4 3/8 and 1/2-Inch Drive Mechanic s Tool Set with Hang-Up Hard Case Inch/Metric Includes Quick Release Ratchets Extensions Wrenches Hex Keys and Shallow/Deep Sockets

This popular 200-piece, mixed SAE and metric set contains 3 ratchets, 71 shallow sockets, 44 deep sockets, 24 bit sockets, 7 extensions/adapters, 35....
New Improved Precise Pro90 Ratchet 90-tooth gear delivers a 4° precision swing that offers improved mobility in tight work spaces.
Other assorted tools includes 14 metric and SAE hex keys, 2 driver handles, 12 nut driver inserts, 7 insert bits to make any task easier to complete.
Constructed from chrome vanadium steel with professional grade high-polish finish to ensure strength and durability.
Metric and SAE socket sizes are easy to identify with laser etched size call-outs and color-coded stripes to identify metric (blue) and SAE (red)....

Check Stock

Kobalt 856855 300-Piece Advanced Mechanic's Tool Set in Foam Trays, Inch/Metric

This 1/4-in drive set includes 73 commonly used tools including 15 metric and SAE sockets, a 3-in extension and a 72-tooth ratchet and will be a great addition for simple fixes.
Other tools include 16 metric and SAE hex keys, 16 oz hammer, driver handle with 20 insert bits, 3-piece pliers set, 6-in adjustable wrench, 12-ft measuring tape, 9-in level, a pair of household scissors and retractable utility knife with 10 spare blades.
1/4-in drive metric and SAE socket sizes include 10, 11, 12, 13 and 14 mm as well as 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 and 1/2-in.

Check Stock

Muzerdo 115PCS Sae and Metric Bearing Steel Tap and Die Rethreading Kit with Metal Box

Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more.
Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces well organized and safely stored..

Check Stock

GEARWRENCH 176 Piece ¼”, 3/8”, & ½” Dr. 12 Point Master Socket Set - 89074

Set includes 1/4", 3/8", & 1/2" drive 12 point SAE & metric, standard & deep sockets.
Bright, full polish chrome finish easily wipes clean and resists corrosion.
Off-corner loading design reduces fastener rounding.
Chamfered opening quickly guides fasteners into socket.
Double line (SAE) and knurled (metric) ring help easily identify standard and metric sockets.

Check Stock

1 TU58 Thread Measuring Gauge, Vertical Bolt and Nut Gauge / Thread Checker (Inch & Metric)

【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.

Check Stock

2 Pack Thread Pitch Gauge, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth, Multi-Purpose Screw Pitch Cutting Gauge Caliper Gages Measuring Tool

★【What You Get】: In this thread pitch gauge kit, it include 51Pcs America SAE type, 52pcs metric and Inch type, 3pcs metric & america SAE type & British Whitworth, they are well packed in a plastic box, easy for carry and store..
★【High Quality】: All the thread pitch gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
★【Measuring Range】: 51pcs America SAE type measuring range is 4-84.
58pcs Metric & America SAE Type & British Whitworth Metric is 0.25-6.0mm, Imperial is 4G-62G US: 8, 10, 11, 14, 19, 28..
★【Easy to use】: Designed with a hole on each end, use screw for easy adjust and disassemble, from where you press the tooth gauge, you can easily rotate the thread blades, numbers are stamped clear for read..
★【Wide Application】: They measure accurately and have almost no errors. Typically used to check the mold & machine & mechanical thread size determination is correct.
Accurately measures internal and external screw threads with thread blades of varied size.
Center Gauge use to grind and position thread cutting tool on a lathe..

Check Stock

ATOPLEE Spiral Point Plug Threading Tap ,5pcs HSS 6542 Titanium Coated Metric Right Hand Thread Taps,M3-M8

...ial – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more materials and they will stay sharper for longer..
Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces well organized and safely stored..

Check Stock

ARES 60141 – 8-Piece Metric & SAE Socket Keeper Socket Organizer Tray Set – Black & Red Socket Holders - Store 176 Standard & Deep Sockets - Socket Posts Feature High Visibility Markings

SPECIFICATIONS: This socket organizer set is a perfect organization system for your tool storage collection that makes it easy to store your most popular metric and SAE sockets, both standard and deep. Unlike other organizers, these trays feature vertical peg board designs that keep your sockets out of the tool box, immediately identifiable, and exactly where you need them. With this wide range of sizes, you can organize your tool chest with ease. *Sockets are not included with the holder.*.
SIZES: This set includes 176 posts with one standard and one deep post for each size. 1/4” drive sizes include a metric range of 4mm to 15mm and an SAE range of 1/8” to 5/8”. 3/8” drive sizes include a metric range of 6mm to 20mm and an SAE range of 1/4" to 1". 1/2” drive sizes include a metric range of 10mm to 27mm and an SAE range of 3/8” to 1-1/4”. For a complete list of included posts, please reference this item’s images for a comprehensive table of sizes..
DESIGN: These socket organizers make managing sockets simple.
each tray’s vertical posts secure sockets and feature size markings for easy identification. With their unique 2-tray designs for superior organization and mobility, the ½” organizers offer more extensive 1/2” socket st....

Check Stock