Top Sae Flare Adapters Reviews

TEMCo Industrial Universal Automotive Tube Flaring Tool Set Includes Push Connect Double Flare Fuel and Trans Cooler Dies TH1911

Dies and adapters to fabricate push connect fittings for 1/4, 5/16 and 3/8".
flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
Dies and adapters to fabricate GM fuel line flare, brake lines and transmission 5/16 and 3/8".
GM transmission cooling line 3/8" and 1/2".
Dies and adapters to fabricate metric bubble flare 4.75, 6, 8, and 10mm.
Dies have an enlarged compression area to grip the dies better.
Flaring tool set includes a Stabilizing Arm for easy tube forming.

Check Stock

Titan 51535 3/16-Inch Double Flaring Tool

Set Contents: (1) 3/16-Inch Double Flaring Tool with Removable Handle, (1) Positioning Bolt, (1) Double Ended OP1/OP2 Punch, (1) Container of Die Lubricant.
Creates a perfect inverted 45-Degree SAE double flare with 3/16-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing..
Can be used on the vehicle! Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle..
Handle can be removed if you prefer to use in a bench vise..
SAE Double Flare is an inverted 45-Degree flare typically used in automotive brake line applications. 3/16-Inch brake lines are on almost all cars and trucks making this flaring tool usable with most vehicles..

Check Stock

GEARWRENCH 114 Pc SAE/Metric Ratcheting Tap and Die Set - 82812

Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
Ratcheting t wrench works with GEARWRENCH pass thru socket system.
Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket accessories.
Auto locking feature allow the tap adapters to be removed safely Blow mold carrying case with tilted tap holders for easy access and storage Set includes 2 ratcheting T handles, 3 sizes of tap adapters and 2 sizes of die adapter, 2 extension adapters and a sliding T for the adapters, a 4mm hex key, 5 screw extractors, SAE and metric thread gauges, and 48 taps and dies in SAE and metric sizes ranging from 4 40 to 3/4” and 3mm to 18mm.

Check Stock

Inline Tube Replacement for Combination Metric Bubble & 45 Degree Double Flare Tool with Deburring Tool

Unique Vise Clamp with removable single flare end to insert the bubble head adapters.
45 degree single, double or bubble flares on soft steel, brass, or aluminum tubing.
Includes seven adapters, yoke assembly, bar assembly, and handle in a molded storage case..

Check Stock

findmall 0386-0849 Nitrogen Flow Meter 1/4Inch SAE Flare Inlet and Outlet 50PSI 0-75CFH Flow Output Provides Precision Gas Flow Control for Nitrogen-Purging Applications

Material: The meter made of brass body construction for long-lasting durability..
Safety: Over-pressure safety relief rupture disk..
Dimension: 1/4 Inch SAE female flare Inlet connection, 1/4 Inch SAE male flare outlet connection..
Parameter: Max inlet pressure 50 PSIG, outflow of 0 to 75 SCFH and 0 to 35 LPM..
Application: Use with any nitrogen-purging regulator equipped with a 7/16Inch - 20 male flare, provide extremely low flow high precision gas control....

Check Stock

4LIFETIMELINES Economy Brake Line Flare Kit for Single, Double (SAE) Flares & Bubble (ISO) Flares - 2 Flaring Bars, 9 Flaring Dies, Tubing Reamer, & Storage Case

Creates single, double inverted (SAE) flares & bubble (ISO) flares up to 0.040″ wall thickness.
Designed to perform flares on thin wall steel, aluminum, copper, and nickel-copper tubing.
Includes flaring dies for sizes: 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 4.75mm, 6mm, 8mm, 10mm.
Self-centering yoke has corresponding slots to hold bar assembly tightly in place during flaring.
Contents Include: (1) SAE Forged Alloy Steel Flare Bar, (1) Metric Forged Alloy Steel Flare Bar, (1) Self Centering Premium Yoke, (10) Flare Die Heads, (1) Tubing Reamer 3mm-12mm, (1) Rigid Plastic Storage & Carrying Case.

Check Stock

OTC 6502 Master Brake Flaring Tool Kit

Covers single double and bubble type flares.
Single flare standard lines 3/16 inch – 5/8 inch and single flare metric lines 4 millimeters – 14 millimeters.
Double flare standard lines 3/16 inch – 1/2 inch and double flare metric lines 4 millimeters – 10 millimeters.
Bubble flare standard lines 3/16 inch – 1/2 inch and bubble flare metric lines 4.75 millimeters – 10 millimeters.
Kit contains flaring bar, arbor press, adapters, tube cutter, and debarring tool – all in a hard case.

Check Stock

SPARC Nitrogen Flow Indicator 1/4 SAE Flare Inlet and Outlet 50PSI 2YR USA Warranty

CONNECTIONS ✔ Nitrogen Flow Indicator, 1/4 Inch SAE Female Flare Inlet Connection, 1/4 Inch SAE Male Flare Outlet Connection.
GREAT FOR ✔ Provides extremely low flow / high precision gas control for nitrogen purging applications.
MEASURES ✔ 0-75CFH flow output @ 50psi. Nitrogen Flow Indicator uses a float ball to visually confirm the nitrogen is flowing during the brazing of....
SAFETY ✔ Over-Pressure Safety Relief Rupture Disk.
WARRANTY ✔ Backed by our rock-solid 2 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer service and....

Check Stock

Jaws HAVC Pipe Cone Flaring Tool kit 6-19mm 45 Degree Angle Eccentric Cone Type Sets for Water Gas Refrigeration Brake Line repair

Recommended for flaring aluminum and soft copper..
Handle clutch releases when flare is complete to iron and smooth the flare..
Features a durable eccentrically-mounted, hardened steel flaring cone for even metal flow..
SAE flares in 1/4-inch, 5/16-inch, 3/8-inch, 1/2-inch, 5/8 and 3/4-inch sizes..

Check Stock

MASTERCOOL 72485-PRC Universal Hydraulic Flaring Tool Set Includes 3/8 and 1/2 Transmission Cooling Line Die and Adapter Sets with Tube Cutter Silver/Blue

TUBE AND DIE SET STABILIZING ARM for easy tube forming.
MAGNETIC ADAPTER HOLDER keeps adapters in place.
EQUIPPED WITH AN ENLARGED DIE SET COMPRESSION AREA for better grip of dies.
CAN BE USED ON "annealed steel" & "dead soft".
INCLUDES dies and adapters to fabricate push connect 1/4, 5/16 and 3/8".
GM fuel line flare, brake lines and transmission 5/16 and 3/8".
flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
metric bubble flare 4. 75, 6, 8, and 10mm.
GM transmission cooling line 3/8" and 1/2".
mini tube cutter for 1/8" to 5/8" (3 - 16 mm) O. D. tubing (1/8 to 1/2" nominal) all packaged in a custom blow molded case.

Check Stock

2PCS Quick Coupler Access Tee, 1\\/4'' Valves Core Tee Adapter with Swivel Connector, Fits for Gauge Deep Vacuum Pump Manifold

【WELL- DESIGNed TEE CONNECTOR 】This Quick coupler access Tee with 1/4’’male flare connector is designed to hook up a vacuum gauge/micron gauge or something else.And it can ensure there is no leaking. You can use it with security..
【PREMIUM QUALITY】 This refrigerant tee adapter valves core is made of high quality Brass with durable construction , can provide you with long-lasting usage..
【EASY to INSTALL】 The HAVC tee adapter is easy to operate and install with strong sealing for durability and safety.You can remove the valve core reliably..
【ACCURATE DIMENSION】 One of end is Female 1/4" SAE flare FFL with valve core depressor built-in. Another two ends 1/4" SAE male flare MFL..
【1 YEAR WARRANTY】 Once order this 1/4 inch tee adapter c/w valve core from us, you will enjoy 12 months warranty. If there are any questions, please feel free to contact us..

Check Stock

MASTERCOOL 72450 Double Metric Bubble Flaring Tool Set Black/Silver/Blue

Set includes the Upgraded Hydra-Flare Yoke & Pump Assembly.
45 & Double Flaring Adapters and Die Sets.
Hydra-Flare Yoke & Pump Assembly has been modified with a tube & die set stabilizing arm for easy form tube forming.
Magnetic Adapter holder to keep adapters in place.
Equipped with an Enlarged Die Set Compression Area for better grip of dies.

Check Stock

RX WELD Nitrogen Regulator with 0-400 PSI Delivery Pressure Equipment Brass Inlet Outlet Connection Gauges With 6.6Ft Refrigeration Hose

PRESSURE- Input: 0-4000PSI. Output: adjustable - 0-400PSI.
CGA580 Inlet Connection, 1/4" SAE Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
Regulator with Refrigeration Hose, 65 inches Long, 600 PSI Max Pressure and 1/4" SAE Female Flare Connections.Great for HVAC Purging / Inertization / Pressure Tests / Leakage Tests / Brazing / Soldering.
Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.

Check Stock