Top Sae Flange Protectors Reviews

Abrams SAE Class-1 Bold 12 [Amber/White] 36W - 12 LED Snow Plow Truck Vehicle LED Grille Light Head Surface Mount Strobe Warning Light

  • Certified SAE J845 Class 1 & SAE J578 for Amber, Blue, Red, & White. Meets California Title 13 Class B with Amber, Blue, & Red..
  • Each unit contains 6, 3 watt 7th Generation LEDs with great heat sink management for long life span..
  • Built in flasher with 30+ selectable flash combinations, sync-able between multiple units, TBT (Turn/Brake/Tail) Light Function..
  • Completely Waterproofed, Strong fog penetrability and dust-proof and corrosion resistant..
  • Can be mounted almost anywhere, into a bumper, or onto a surface. - Black flange, Padded Gasket, and Installation Manual included..
Check Stock

Maxim Hydraulic Motor 1.22 CID BIROTATIONAL Circle Flange 5/8\ KEYED Shaft SAE 6 Rear Ports, 271654

  • MOTOR 1.22 CID BIROTATIONAL CIRCLE FLANGE.
Check Stock

Mevotech TTX Suspension Ball Joint

  • MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings..
  • EASIER INSTALLATION: Quickly install the ball joint with the custom-designed adapter ring..
  • SUPERIOR SEAL: Lock out moisture and contaminants with Integri-Boot design built into the ball joint assembly..
  • SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree & 90 Degree SAE grease fitting included..
  • ACCURATE FIT: Easily and accurately press fit the ball joint into the larger flange diameter..
Check Stock

Mevotech TTX Suspension Ball Joint

  • MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings..
  • QUICK AND EASY INSTALLATION: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided..
  • SUPERIOR SEAL: Lock out moisture and contaminants with Integri-Boot design built into the ball joint assembly..
  • SIMPLE TO SERVICE: Make servicing a snap with the 90 Degree SAE grease fitting included..
  • ACCURATE FIT: Easily and accurately press fit the ball joint into the larger flange diameter..
Check Stock

Seachoice 15521 Fuel Sender Reed Switch, 6 Inches Long, Compatible with Most 33 (Full) and 240 (Empty) OHM Fuel Gauges

  • Reliably monitors fuel levels to provide fuel gauge (sold separately) with the most accurate readings.
  • Compatible with 33 (full) and 240 (empty) ohm gauges.
  • No moving mechanical parts, which optimizes durability and reliability.
  • Features a Stainless Steel immersion tube, corrosion-resistant plated mounting flange, gasket (SAE 5 hole), and .250-inch insulated spade connectors.
Check Stock

Caplugs 99394887 Plastic Tapered Cap and Plug with Wide Thick Flange WW-21, PE-LD, Cap OD 1.857\ Plug ID 2.048\

  • Designed to be used as a cap or plug and can be used in many applications.
  • Tapered design provides a range for the parts to fit in components, wide and thick flange for added protection and prevents from being pushed through when used as a plug.
  • Flanged for easy installation and removal.
  • May be used for mil stud, sae-type hydraulic threaded or non threaded fittings.
Check Stock

Hydraulic Gear Pump Sizes from 0 to 18 gpm 3625psi SAE A Flange Side Ports CCW-Rotation, PFEG Series (Shaft: 3/4\ Diameter keyed, 12cc: 9gpm at max. RPM)

  • IMPORTANT: SHAFT MUST ROTATE COUNTER CLOCKWISE WHEN LOOKING AT THE SHAFT. IMPROPER ROTATION DIRECTION COULD LEAD TO SHAFT LEAKAGE AND SEAL FAILURE..
Check Stock

Maymom Pump Parts Compatible with Spectra S2 Spectra S1 Spectra 9 Plus Breastpump, Incl 24mm Flange Valve Tubing Backflow Protector, Replace Original Spectra Pump Parts or Spectra S2 Accessories

  • "Maymom aftermarket PUMP PARTS FOR SPECTRA S2 SPECTRA S1 SPECTRA 9 PLUS BREASTPUMPS. Made by Maymom. Not Original Spectra Parts. Incl 2 Flanges (24mm), 2 Valves, 2 Backflow Protectors and 2 Tubings. The flanges can only connect to WIDE MOUTH bottles..
  • "AFTERMARKET PARTS MADE BY Maymom. INTERCHANGEABLE WITH SPECTRA PARTS. All parts are interchangeable with Spectra Pump Parts. Can be used with Spectra flange, Spectra backflow protector, Spectra valve, and Spectra tubing..
  • "USED WITH WIDE-MOUTH BOTTLES ONLY. Use this kit with Spectra bottles, Avent bottles, and Maymom wide mouth bottles. DOES NOT work with OTHER WIDE NECK BOTTLES. CLOSED SYSTEM. No contact between milk and tubing..
  • "DIFFERENT FLANGE SIZE AVAILABLE: 19mm, 21mm, 24mm, 25mm, 27mm, 28mm, 30mm, 32mm. Refer to size selection guide in product photo to choose the right size for you..
  • "IN RETAIL PACK. All parts can be sterilized with water steam or boiling water. Do not contain any BPA. Tested by independent labs for safety..
Check Stock

[Patent Design] CKE 40 Pack T316 Marine Grade Stainless Steel 30 Degree Angle Beveled Protector Sleeves Wood Post Protector for 1/8" Wire Rope Cable Railing, DIY Balustrade, Come with a Free Drill Bit

  • ...e = 1.1", Sleeve Diameter=0.28",Flange Diameter =0.58"(The longest diameter of an ellipse)/0.51"(The shortest diameter of an ellipse), Drill Bit Diameter = 7mm..
  • Design: Exclusive Patent Design Product.Often used in conjunction with straight wood post protectors, this 30 degree wood post protectors transition wood post protectors from straight runs transitioning to an angled run. Widely used this on intermediate angled posts on stairways and ramps, it can replace the combination of Straight Protector Sleeves + 30 Degree Angle Beveled Washer, create a cable railing system that exposes your beautiful view while only exposing a nearly flush fitting head..
  • Package: 40 PCS 30 Degree Stainless Steel Protector Sleeves + 1 * Drill Bit..
Check Stock

Maymom Medium Stem Backflow Protector for Cimilre S3 and F1 Electric Double Pump Ameda MYA Portable and MYA Pro Pump Motif Luna Pump

  • Incl. two units of backflow protectors. After market parts made by Maymom, not original spectra or Cimilre part..
  • Used in the regular Cimilre flange as well as Hands Free kit.
  • Also suitable for Ameda Mya Portable and Ameda Pro pumps.
  • Can connect between Cimilre S3 or F1 pump and Cimilre Hands Free Kit.
Check Stock

Maymom Pump Parts Compatible with Spectra S1 Spectra S2 Spectra 9 Plus Incl Duckbill Valve Silicone Membrane Spectra Replace Spectra Duckbill Valve S2 Replacement Parts Not Original Spectra Pump Parts

  • ...s, Spectra Duckbill Valves, Spectra Membranes..
  • SAME SUCTION POWER AS OEM VALVES. The duckbill valves are compatible with Spectra Flange and Maymom flange. The silicone membranes are compatible with Maymom backflow protector (Long, Short and Medium) and Spectra S1 backflow protectors, Spectra S2 backflow protector. Also suitable for Ameda Mya pumps. It does not fit the old version of spectra backflow protector.
  • OPTIMIZE PUMP PERFORMANCE. Replace silicone membrane, duckbill valves regularly to optimize the performance of your breastpump..
  • Comply with EU and USA FDA regulations for materials that contact food. Tested by independent labs for quality and safety. All items packaged in retail pack, sealed by manufacturer Maymom. Can be cleaned with boiling water or water steam..
Check Stock

Maymom Backflow Protector, Long Stem, for Spectra S1, S2 and 9 Pumps to use Medela Flanges and Medela Parts; 2pc

  • CONTENTS: 2 LONG STEM BACKFLOW PROTECTORS. Compatible with Medela Breastshield/old connector and Spectra Pumps. With this product, you can use your Medela pump parts on Spectra breast pumps. DO not use this with Pump in style with MaxFlow.
  • COMPATIBLE WITH MEDELA BREASTSHIELD and SPECTRA S2 and S1 BREAST PUMPS (See photos before purchasing). DO NOT WORK WITH SPECTRA FLANGE. Not original Spectra pump parts..
  • Comply with FDA regulation 21 CFR 177.1520, 21 CFR 177.2600 and EU Commission Regulation (EU) No 10/2011 for plastic materials that intended to come into contact with food..
Check Stock

BUSY-CORNER 4C-4782 Seal O-Ring Kit, Nitrile 90, Hydraulic Hose Fitting Orings, Fits CAT Caterpillar Excavator 2701528 4C4782 Replacement

  • High Quality:Made of Buna-N 90D (NBR) material,are durable,high temperature resistance,anti static,oil resistant,UV resistance,heat resistant,wear resistant,exceptionally suited for high pressure applications..
  • Multi Size:You can get a good selection of 32 different CAT OEM part numbers oring in this kit,can meet almost all your needs..
  • Wide Application:This Kit use for sae stor & orfs fittings,code 61/62 flange O-Rings,Caterpillar hydraulic hose fitting oring..
  • Handy Packing: Comes with a heavy duty storage case that keeps each size o rings separated and organized,that makes more convenient to carry, select and collect..
  • Customer Service: You are unhappy for any reason, return your kit with no questions asked and we will provide a full refund..
Check Stock