Top Sae Bolts Reviews

ABN Impact Nut Driver Tool Set - 6pc SAE 6 IN Long Shank Nut Driver Bits Magnetic Tip Sockets, 1/4 IN Hex Shank

IMPACT DRIVER SET: Use the ABN SAE Magnetic Nut Driver Bits Impact Drill Sockets Set to tighten and remove nuts and bolts when working in your home, on your vehicle, or on metal or woodworking projects.
EXTEND YOUR REACH: 6-inch (15.2cm) long reach to access narrow spaces and hard-to-reach areas.
1.25 inch (3.1cm) long hex shanks feature 1/4 inch (6.35mm) diameter.
NEVER DROP A FASTENER AGAIN: Impact nut driver magnetic impact driver sockets set have powerful magnets to provide superior retention on screws, nuts, and bolts while operating.
BUILT TO LAST: Prevent rounding off fasteners with the recessed 6 point nut drivers for impact drills.
Chrome-vanadium steel and black phosphate coating provides maximum strength and rust resistance.
PACKAGE CONTENTS: Impact driver socket adapter set includes 6 SAE impact drivers (1/4, 5/16, 3/8, 7/16, 1/2, and 9/16 inch) and 1 bit driver holder.
Each magnetic extended nut driver bit nutsetter tool is permanently laser-etched sizing makes identification easy.

Check Stock

NEIKO 02461A 3/4 Inch Drive Impact Socket Set, SAE 1” to 1-1/2”, 8 PC, Deep/Jumbo Sockets, Chrome Vanadium Cr-V

HEAVY DUTY BUILD: The construction of each 3/4” socket in this 8 piece set consists of extremely strong Chrome Vanadium (Cr-V) steel that will output greater torque, but also has a corrosion resistant black phosphate finish to give your sets longevity and longer lifespan..
LARGE SOCKET: This ¾” impact socket set is designed for use with impact wrenches. A set of 8 high-torque, 6-point SAE sockets with ¾ inch drive, each jumbo socket is used to remove tough nuts and bolts on larger vehicles..
SPECIAL DEEP DESIGN: Each socket has a unique design that grips the flat sides of fasteners rather than the corners to prevent stripping and rounding off of bolts. With a high torque impact gun, each standard socket will torque the most stubborn fasteners..
HIGH VISIBILITY MARKINGS: The easy-to-see high-contrast laser-etched standard size markings allow easy reading in low light settings and promote efficiency on the job..
INCLUDES COMMON SAE SIZES: Includes eight common Standard socket sizes (1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2 inch) with blow-mold storage case included..

Check Stock

DEWALT 20V MAX* Concrete Vibrator, Pencil (DCE531M1)

High-quality Material: Aluminum alloy housing, silver copper converter, all stainless steel bolts and nuts. Motor uses ferrite magnet and oxygen free copper rod for long term work..
Durable Cable: 42"SJEOW cable with SAE J-928 two pole connector.
Extra Screws: Comes with screws,nuts and bolts for easy mounting.
Applications: This totally sealed motor can be used in snow plough, vibrating screen or concrete mixer, etc.
Replaces D6515 , VBR100 , 3007416 for Most V-Box Spreaders.

Check Stock

8477 Piece Grade 5 COARSE ZINC Plated Bolt Assortment. Bolt, NUT, Washer and LOCKNUT. Comes with (2) 40 Hole Durham Bins. 1/4-3/4

What You Will Get: A variety of quantity to suit your needs, 197PCS heavy duty hex bolts +90PCS hex nut+90PCS flat washer+90PCS spring washer..
Heavy Duty: bolt kits are made of high quality materials carbon steel, with excellent anti-rust and corrosion resistance property, can be used in extreme environments..
2 Kinds of Washers: washers designed to spread the load of screw fastening and prevent loosening in industrial, shop, automotive and home appliances.
Practical SAE Sizes: Use for fastening metal, wood and plastic materials together, includes sae sizes 1/4-20 x1/2" to 1-1/2", 5/16-18 x 3/4" to 2", 3/8-16 x 3/4" to 2".
Handy Kit: VIGRUE Bolt kit are stored in a transparent box organizer, convenient for your storage and use, handy for your daily reaching and putting away..
2 Kinds of Washers Highly Compatible with Screws: washers designed to spread the load of screw fastening and prevent loosening in industrial, shop, automotive and home appliancesl.
nuts and bolts are the same matching size with washers and features a solid bearing surface to prevent nut/bolt head from tearing through applicable material.

Check Stock

FOLIV 212PCS SAE Hex Bolts Nuts Flat Spring Washers Assortment Kit, Heavy Duty 304 Stainless Steel, 10 SAE Sizes Included

GOOD MATERIAL: Made of 304 Stainless Steel, anti-rust and corrosion resistance, FOLIV hex bolts nuts can be used in humid environments..
DIFFERENT SAE SIZES: our heavy duty hex bolts kit includes 1/4’’- 20 x 3/4’’, 1/4’’- 20 x 1-1/2’’, 1/4’’- 20 x 1’’, 1/4’’- 20 x 2’’, 5/16’’- 18 x3/4'', 5/16’’- 18 x 1'', 5/16’’- 18 x 1-1/2’’, 5/16’’- 18 x 2’’, 3/8’’- 16 x 2-1/2’’ and 3/8’’- 16 x 1-1/2’’..
Package: 53PCS Hex Bolts +53PCS Hex nut+53PCS Flat washer+53PCS Spring washer are included in the package, suitable for users' needs..
Easy to carry: All the nuts and bolts are packed in a transparent box with clear size label on it. It is convenient for user to store and use..
GOOD AFTER-SALE SERVICE: FOLIV provide good after-sale service for our product quality problem. Please feel free to contact us if you have any questions..

Check Stock

Jackson Palmer 2,050 Piece Hardware Assortment Kit with Screws Nuts Bolts & Washers 3 Trays

MORE SIZES AND PIECES: 2,050 pieces and 60 different hardware sizes. SCREWS: 19 sizes and 515 pieces of Wood and Sheet Metal Screws. SAE: 21 sizes and 670 pieces of Bolts (Phillips Head), Hex Nuts, and Washers. METRIC: 20 sizes and 865 pieces of Bolts (Phillips Head), Hex Nuts, and Washers..
BUILT FOR WORK: Grade 2 Nuts/Bolts. 6-Nibs + Type 17 point Heat Treated Screws. Perfect for DIY Projects, with professional results. Use for household maintenance and repair, and so much more..
NO-MIX COMPARTMENTS: Interlocking lid prevents hardware from mixing and removable nested dividers can be re-arranged for further customization..
STACKABLE CASES: Durable construction with stackable bins and locking tabs for easy carrying and transport. Add on to your stack with additional empty bins to expand your collection..
GUARANTEED: Try our Deluxe Hardware Assortment Kit with NO risk and 100% money-back guarantee - NO questions asked!.

Check Stock

CROSS Manufacturing SBAF2J 143430 SBA Series Cast Iron Double Spool Monoblock Hydraulic Directional Control Valve with joystick, 1st Spool 4-Position Float, 2nd Spool 3-Position, Open Centered, 3/4\ x 3/4\ x 1/2\ NPT Female, 2500 psi, Grey

Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
2 Spools Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
Double Acting - This control valve comes with 2 spools and #8 SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, and more.
Max Pressure: 3600 PSI, Inlet Port: SAE 10, Outlet Port: SAE 12, Working Ports: SAE 10, Fluid Temperature: 5 to 176℉, Valve Type: 4 way 3 positions, Mounting: 3 bolts m8 needed.

Check Stock

VIGRUE 540PCS #2-56#4-40#6-32 Phillips Pan Head Screws Bolt Nut Flat Washers 304 Stainless Steel Machine Screws Assortment Kit with Wrench and Storage Case (#2-56#4-40#6-32)

◆Good Material: high quality 304 stainless steel, superior rust resistance, with fine workmanship.
◆Package Quantity: Phillips pan head SAE bolts screw nuts washers machine screws kit contains 260pcs screws and 140pcs washers and 140pcs nuts, total is 540pcs.
SAE Sizes: 12 different sizes includes, #6-32x1/4.

Check Stock

700Pcs Nuts and Bolts Assortment Kit, 4-40#6-32#8-32#10-24 Phillips Pan Head Assortment Stainless Steel Bolts Nuts Flat Washers Nuts Bolts with Case

【Stainless Steel Bolts And Nuts Kit】These assorted nuts and bolts are made of stainless steel 304, waterproof and corrosion resistance..
【Multiple Sae Sizes】This screw kit provides various lengths of pan head, Phillips screws, washers and nuts in #4, 6, 8, and 10 size with ample quantities to last..
【Convenient See-Through Box】See-through box with detail information sheet about the sizes of different screws, nuts and flat washers. Easy to store and at hand when needed..
【Wide Applications】These assorted nuts and bolts are widely used in household. Good way to obtain assortment of fasteners, Perfect gift for the man..
【100% Satisfied】We offer a 24-month warranty, and contact us freely if you have any problems and questions..

Check Stock

kauplus SAE 4 in 1 Non-Slip Box End Reversible Ratcheting Wrench Set - 2PCS, SAE, 6pt, 120-Tooth Ratcheting gear, 5/16 Inch to 3/4 Inch

2 Pieces Reversible Ratchet Wrench Set - SAE.
Multiple sizes 4 in1 double-head ratcheting gear wrench have the most right size of your needs.
Standard 6 Point, Anti-Slip designed allow you to easily tighten or loosen more rounded bolts.
120-Tooth, 3 Degree minimal working swing arc for access in tight space offer an easy and fast operation for all quick jobs.
SAE: 5/16", 3/8", 7/16", 1/2”, 9/16", 5/8", 11/16", 3/4".

Check Stock

ABN 1/2in Impact Drive Lug Nut Socket 5-Piece Set Non-Marring, Color-Coded, Thin-Walled Wheel Rim Protectors

Practical: Use the ABN 1/2 Inch Impact Drive Lug Nut Socket 5-Piece Set Non-Marring, Color-Coded, Thin-Walled Wheel Rim Protectors to remove bolts on vehicle wheels as the protective sleeves prevent damage on custom rims and lug nuts.
Safe: 360 non-scratch sleeve and insert protect bolt tops, wheel rims, and lug nuts from scratches during use.
6-point thin-walled socket constructed from chromium-molybdenum steel (Cr-Mo) which makes the socket strong and long-lasting.
Versatile: Perfect for both factory and aftermarket painted, clear coated, chrome, and other wheels/bolts.
Fits all 1/2-inch drive socket hand wrenches, electric, or air tools.
Hollow design allows room for removing longer bolts.
SAE and metric sizes 17mm, 19mm (3/4), 21mm, 13/16, and 7/8.
Fit most vehicles with these size wheel bolts (Example: 17mm = BMW, Mercedes Benz, Audi, Mini Cooper).
Easy Storage: Heavy-duty 9 x 5 x 2.25 (22.9cm x 12.7cm x 5.7cm) plastic blow-molded carrying case for easy transport, simple storage, and quick organization.
Specifications: Thin-walled, non-marring, and laser etched.
Package includes (5) lug nut sockets + (1) carrying case.

Check Stock

Neiko 02472A 3/8-Inch-Drive Colored Mechanics Tool Ratchet, Socket Set, 76-Piece Standard and Deep SAE Sizes 1/4\ to 1\ Metric Sizes 6 mm to 24 mm Made with CrV Steel for Auto Repair

RATCHET SOCKET SET: This 76-piece socket wrench set combines both metric and SAE sizes to create the ultimate ratchet and socket kit. It includes standard and metric shallow and deep socket sizes to fit large and small sockets..
DURABLE SOCKET-WRENCH SET: Made with chrome vanadium steel, each piece in this SAE and mm tool set has a corrosion-resistant, chrome-plated polish for easy cleanup. The socket pieces are color coded for easy size reading and selection..
EFFICIENT SOCKET & RATCHET TOOL SET: High torque, 6-point socket design, each socket fits hex-shaped fastener heads while preventing round off to keep your nuts and bolts in good condition. Use this tool extension set for automotive or home fasteners..
INCLUDED EXTENSIONS & TOOLS: This 76-piece set includes a 3/8-inch ratchet, a 15-inch breaker bar, an L-shaped extension, a universal joint, 3-inch and 6-inch extension bars, a carrying case, and 5/8-inch and 3/16-inch spark-plug sockets..
SIZES: This mechanic tool socket set kit includes metric shallow sizes from 6 mm to 24 mm and metric deep sizes from 6 mm to 24 mm. It also includes SAE shallow sizes from 1/4" to 1" and SAE deep sizes from 1/4"to 1" in a durable blow mold carrying case..

Check Stock

The Hillman Group 830518 Stainless Steel 7/8-Inch Flat Washer, 10-Pack

Stainless Steel coating for a corrosion resistant finish.
SAE fine washers for coarse threaded bolts.
Washers are used to increase the pressure a bolt or screw provides.
Use a washer that is the same finish as your other fasteners.

Check Stock