Top Sae 30r14tfuel Hose Reviews

EVIL ENERGY 3/8 Fuel Hose Line Push Lock NBR Rubber SAE 30R7 25FT 300PSI

Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 3.9inch(100mm)..
Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc..
Application: SAE 30R7 rubber fuel line widely used in fuel system,oil cooling,steam emission,please check the pressure of application before perchase..
EVIL ENERGY provide 25ft 3/8inch fuel hose 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message..

Check Stock

5/16 Fuel Hose 8mm Transmission Oil Cooler Hose High Pressure Fuel Injection Hose For Conveying Gasoline, E-85, E10, Diesel, Oil, Coolant, and Bio-Diesel Fuels In Cars, Trucks, Buses, Etc

PREMIUM MATERIAL◀The 5/16 fuel injection hose is made with high-quality Nylon, thus preventing it from rusting and corrosion. The 5/16 fuel hose also has a wall thickness of 3.05mm..
BETTER TRANSIMMISION◀A perfect fuel line for vehicles with engines that need a large tube diameter. Its 5/16 inch diameter helps in better flow and intake of fuel. This 5/16 fuel line hose ensures that the car engine is able to process the fuel in the best possible state. The 5/16 transmission cooler hose comes as a roll of 10 feet long enough for a wide range of applications..
QUALITY TESTED ◀The tube is double annealed making it easy for bending and flaring. You can cut the tubing according to actual needs to better meet your needs. Oil resistant, temperature-resistant, and ethanol tolerance. Hold up to -68°F to +212°F, a lot stronger to heat and extreme circumstances..
BENDABLE ◀The 5/16 fuel line enables you to make sharp bends without kinking, minimum bend radius up to 4.7inch(120mm). The 8mm fuel injection hose is easy to work with, and you can even bend it with the palm of your hand. You, however, need to bend it slowly and ba....

Check Stock

Fenix E30R 1600 Lumen USB Rechargeable EDC Flashlight with LumenTac Battery Organizer

POWERFUL AND COMPACT - Fenix E30R pushes up to 1600 lumens over 650 feet in distance in a body under four inches in length, comfortably carried your hand or pocket, perfect for everyday carry (EDC)..
SIMPLE OPERATION - Fenix E30R is an all-in-one single button operation, to turn on/off, quick cycle through five different brightnesses and a strobe functions. Double click to lock the light to avoid accidental activation..
CONVENIENT CHARGING - E30R provides up to 70 hours of use with the included high capacity battery. A smart LED below the switch indicates remaining battery life. Fully recharge under three hours by snapping the included magnetic USB charging cable onto the body..
DURABLE - The type III anodized aluminium body of the E30R makes it impact resistant up to one meter and allows for even heat dissipation as well as corrosion resistance..
COMPLETE PACKAGE - This package comes with a Fenix E30R flashlight and a Fenix ARB-L18-3500. The USB/magnetic charging cable, pocket clip, lanyard and spare O-ring so your light is ready for any challenge. Carry your batteries safely with the LumenTac organizer..

Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 16 Clamping Range 3/4 Inch to 1-1/2 Inch (19mm-38mm) for Automotive Plumbing, 3/4'', 1'', 1 1/4'' Hose Clamps

Premium Materials: WINL SAE 16 hose clamps of 19mm-38mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
WINL hose clamps are reliable, strong, reusable and durable..
Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size #16 hose clamps have clamping range from 3/4 inch to 1-1/2 inch (from 19mm to 38mm), great for hose or pipes within this range, perfect as 3/4 inch hose clamps,7/8 inch hose clamps,1 inch hose clamps,1 1/5 inch hose clamps, 1 1/4 inch hose clamps etc. . The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
Effortless Installation: WINL size 16 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without ....

Check Stock

BACOENG Vacuum Pump & Manifold Gauge Set - HVAC A/C Refrigeration Kit - Diagnostic R12 R22 R134a R410A - w/Case

Gauge Set — 2 Valve Manifolds with Sight-glass & 1/4″ SAE fittings anodized aluminum block body, oversized sight-glass for easy viewing the refrigerant flow high quality gauge and high accuracy of reading.
Vacuum Pump – Newly Designed Compact Vacuum Pump, Portable and Stronger. Flow rate: 3.6CFM Power: 1/4HP Ultimate Vacuum: 0.8Pa.
Accessory–3 × 4FT Blue Red Yellow Refrigrant Hose,2 × 1/4″ SAE Male to 5/16″ SAE Female Adapters（R410a）, 1 × Toolkit, 12oz Vacuum Oil, 1 × Manual for Pump and Gauge.
Hose– All hose are complied with SAE-J2196 standard standard. Hose Working pressure: 800PSI-4000PSI Acceptable refrigerant: CFC HCFC and HFC.
【Attention】- Ideal for R12 R22 R410A R407C. NEED additional high & low pressure side quick couplers B085XHTS1W if you need to repair R134a vehicle A/C system..

Check Stock

Bonlux E26 R14 Mini-Reflector Floodlight, 4W R14 Short Neck LED Bulb R14 40 Watt LED Spot Light Replacement, Daylight 6000K, 3-Pack

FEATURES - R14 LED light bulb, 4W mini-reflector floodlight (40w equivalent), 400 lumens of brightness, 6000k daylight appearance, E26 medium screw base..
WIDE APPLICATION - R14 LED spot light bulbs use for cabinets, range hood, ceiling lights in living rooms, kitchens, basements, desk lamps, small appliances, pendant, recessed, track, and accent lighting, yards and patio, hotels, restaurants, and retail shops..
ENERGY SAVING - 4W R14 E26 LED bulb can replace 40W halogen light bulb, save over 90% bill of electricity..
EASY INSTALLATION - R14 short neck LED bulb has standard E26 medium screw base, which make this R14 bulb can screw into E26 socket easily..
GOOD SAFETY - R14 reflector E26 light bulb has good cob filament, makes this R14 LED no flicker, no noise, good for lighting..

Check Stock

Fenix HT30R LEP Flashlight, 1640 Yards Ultra Long Throw, USB-C Rechargeable, with LumenTac Organizer

POWERFUL LEP FLASHLIGHT - The Fenix HT30R emits an ultra-concentrated beam at 1640 yards, providing over a mile visibility..
USB-C RECHARGEABLE - Just twist the head to uncover a hidden USB-C port for fast charging of the high capacity battery inside that lasts 2 hours on high and 7 hours on low mode..
EASY TO OPERATE - To activate, simply press the tactical tail switch. Use the mode switch to toggle between brightness outputs, and hold for strobe mode..
BUILT TO LAST - Rated IP68 waterproof with 1 meter impact resistance, the sturdy aluminum body makes the HT30R a reliable tool in all weather conditions..
Content in Package - HT30R Rechargeable LEP flashlight, nylon holster, USB-C charging cable, and a LumenTac battery case.

Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 10 Clamping Range of 1/2'' to 1-1/16'' (13mm-26mm) for Automotive Plumbing, ,1/2 Inch, 3/4 Inch,1 Inch Hose Clamps

Premium Materials: WINL size 10 hose clamps of 13mm-26mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
WINL hose clamps are reliable, strong, reusable and durable..
Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size#10 hose clamps have clamping range from 1/2 inch to 1-1/16 inch (from 13mm to 26mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc.. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
Effortless Installation: WINL size 10 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..

Check Stock

Fenix HP30R v2.0 Black 3000 Lumen Heavy-Duty Rechargeable Headlamp with Spotlight & Floodlight, Detachable Power Pack and LumenTac Organizer

POWERFUL HEADLAMP - The Fenix HP30R v2.0 has a primary spotlight LED and two high CRI wide angle flood lights for a combined 3000 lumen max..
USB-C RECHARGEABLE - The HP30R v2.0 has a rear power pack runs over 15 days of continuous use. Simply plug the USB-C cable to the power pack to charge the headlamp..
PORTABLE POWER - The power pack can be detached and comes with a USB output port to charge other electronics..
ROBUSTNESSES - The all-metal unibody LED housing is impact resistant up to 2 meters, is rated IP66 water resistant, and can withstand temperatures from -31° F to 113° F..
Contents: HP30R V2.0 Headlamp, Rechargeable Power pack, Helmet Attachment Hooks, Cable Clips, USB-C Charging Cable, Stainless Belt Clip, Extension Cable, and LumenTac Organizer.

Check Stock

Mtsooning R134a AC Recharge Hose Kit, Refrigerant Charging Dispensing Can Tap with Gauge 1/4’’ SAE Female Hose for R12 R22 Port for Auto Home Air Conditioner and Refrigerator Refrigerant System

❄Wide Application: Mtsooning AC recharge Hose Kit fits for R134A R12 or R22 refrigerant. Used for auto home air-condition, with highly working performance..
❄Accuate Guage: The Refrigerant Charging Hose Kit has 3 different scale readings for R134, R12 and R22, easy and convinent for your to use..
❄Dimentions: The hose is 19 inch in length which is long enough for your recharing needs. The Dispensing Can Tap has 1/2’’ female x 1/4’’ SAE male adapter..
❄High Quality: The R134A Valve made of corrosion-resistant metal and the hose adopted quality rubber material, features high pressure resistance and sturdy. Inside gasket to prevent leak..
❄Package includes: 1/2’’ female x 1/4’’ SAE male can tap opener, 19’’ recharge hose with 2.7’’ length gauge and one 1/4'' SAE port side for R12/R22 Port ..

Check Stock

Aupoko A/C R134A Refrigerator Freon Recharge Kit with 2PC Bullet Piercing Valve, R134A Piercing Can Tap, R410A Straight Swivel Adapter, 2PC 1/4’’ Adapters with Valve Core

❄ WIDE COMPATIBILITY ---- AC charge hose kit with gauge for R134A R12 or R22 refrigerant refrigerant to vehicle or home air-conditioning, with highly working performance..
❄ PREMIUM QUALITY ---- R134A can tap, R134A low side quick coupler, tank adapters are made of aluminium alloy, for high heat resistance durability and safety..
❄ EASY INSTALLATION ---- Car ac recharge kit has Push & Lock coupler with auto shut off. Easy and convenient to use. Come with gauge for easily viewing during use and getting a correct charge..
❄ DIMENSION ---- 1/2’’ female x 1/4’’ SAE male can tap opener, 59’’ recharge hose with gauge, 13mm R134A low pressure quick coupler, R410A mini split adapter with 5/16’’ SAE female x 1/4’’ SAE male thread, 1/4’’ SAE female and male tank adapter..
❄ PACKAGE INCLUDES ---- With R134A refrigerant charging hose with 7cm Gauge, R134A can opener, R134A quick coupler, R410A straight adapter (1/4" SAE M to 5/16"F), 2pc bullet piercing tap valves kits, 2pc 1/4’’ Female to 1/4’’ Male tank adapters..

Check Stock

SURIEEN R134A A/C Charging Hose with Ball Valve, (4000~800) PSI Working Pressure 1/4' SAE x 1/4' SAE Thread 60' 3 Colors, Fits for HVAC Air Condition R410A R12 R22 R502 R404 Refrigerant Manifold

APPLICATION ----- Refrigerant charging hose with compact ball valve deigned to meet 1/4" SAE requirement for refrigerant permutation, fit most refrigerants like R134A, R22, R12, R502, R404. Standard 1/4” female flare fittings with a valve core depressor and 45°bend on one end for convenient access to the system..
HIGH WORKING PRESSURE ----- Working Pressure: 800 PSI.
Burst Pressure: 4000 PSI. Hose and ball valves with 1/4" SAE thread can be fitted most refrigerants. Note: R410 and R32 refrigerants with 1/4" SAE x 5/16" SAE, if you want to use it on R410 and R32 refrigerants please use a M-1/4" SAE x F-5/16" SAE Adapter..
EASY INSTALLATION ----- 3 colors 60” (5ft) hoses coded in red, blue and yellow, and all completed with compact ball valve and plastic handles on each hose. The coupler nuts are deeply knurled for quick finger-tightening..
PREMIUM QUALITY ----- Refrigerant 3-color charging hoses made of high-quality brass alloy and rubber, last long.
easy to operate and install, strong sealing for durability and safety. Necessary tools for HVAC, car air condition maintenance and coolant or Freon adding..
1 YEAR WARRANTY ----- 3 color refrigerant charging hoses have one-year warranty. true worry-free shopping experience. If this part ever fails please....

Check Stock

Hotwin 9.49mm SAE 5/16' 8mm Nylon Fuel Line Quick Connect Release Hose Disconnect Hose

▶Fuel Line Quick Connect / Disconnect for Fuel / Gas and other common fluid types..
▶Nylon Hose to ID=5/16" (8mm) Rubber Hose..
▶Part number: 9.49mm SAE Fuel Line Connect..
▶Please check the part number and pictures to verify this is the part you need..
▶Package included: 9.49mm SAE 5/16" 8mm Nylon Fuel Line Quick Connect Release Hose.

Check Stock