Top Rubber Plastic Pipe Reviews

PSW TRADE SUPPLIERS LTD Plastic Pipe Cutter for 1-5/8-inch Plastic Pipe, PVC, Rubber Hose

  • Plastic pipes and tubes pipe-cutting tool for pipes 1-5/8 inches in diameter.
  • Pipe cutter with the rubberised handles for non-slip, secure handling and a safety lock lever to protect it from unauthorised use by children.
  • Automatic, controlled opening of blade at the release of lever lock. The spring-loaded ratchet wheel remains in place, preventing the cutters from closing.
  • The thick and sharp blade is made of high-quality stainless steel, with high hardness and high shear force and spring loaded ratcheting wheel.
  • Suitable for all types of plastic pipes and tubes including PVC, PPR, PEX pipe, PE and rubber hose.
Check Stock

Libraton PVC Pipe Cutter 2-1/2\

  • IMPROVED BLADE: The Libraton PVC pipe cutter blade is of SK5 material, and an improved hardness process can ensure its longer service life..
  • CUTTING RANGE: The PVC cutter is of large cutting range, up to 2-1/2-inch (63mm) outer diameter..
  • WIDE APPLICATION: The ratchet PVC cutter can be also applied to cut different plastics pipes and tubes (PVC, PEX, CPVC, PP-R, PE, Rubber Hose, etc.). It is not recommended for cutting THIN PVC pipe..
  • RATCHET DESIGN: The plastic pipe cutter is designed with a ratcheting driver so that you can do the pipe cutting job with one hand easily. OUR TEST SHOWS THAT ONE CUT WITHIN 5 TO 20 SECONDS ONLY..
  • AFTER-SALES SERVICE: We offer a 12-month warranty on this PVC pipe cutter. And our after-sales service team promise to reply to your ANY question WITHIN 24H to help you solve ANY problem with the PVC cutter..
Check Stock

Oatey 33402 Mechanical Test Plug, 3 in, 5 Psi Back, Plastic, 110 Deg F, 3-Inch, Red

  • End of Pipe Gripper plugs are made with ABS glass-reinforced plates for added strength.
  • Extra large zinc wing nut for ease of tightening, no wrench required, and will not rust.
  • Natural rubber O-ring for excellent expansion and memory.
  • Plug is rated for 17 PSI or 40-ft of head pressure.
  • End-of-pipe seals only at the end of a pipe, preventing plug from falling into stack.
  • Galvanized carriage bolt to prevent corrosion.
  • Galvanized mechanical plugs have a wide usage range making them effective on most piping material.
  • Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized.
  • Plastic mechanical plugs are premium plugs designed to hold higher pressures.
Check Stock

Eastman 1 Inch IPS Pipe Repair Clamp, 3 Inch Length, Stainless Steel, 45185

  • PIPE REPAIR CLAMP: Pipe repair clamp tool is designed for use on steel, copper, and plastic pipes, and is perfect for providing repairs to the pipes which suffered puncture, pinhole, or split.
  • creates a positive seal that won't collapse on Schedule 40 PVC.
  • DURABLE: Pipe clamps are crafted from strong and sturdy 301 stainless steel for long-lasting reliability.
  • WHAT IS INCLUDED: Metal pipe clamp is equipped with a high quality rubber gasket that will not deteriorate, and includes galvanized iron lugs which protect against rust and corrosion.
  • SPECS: Pipe fitting clamp features a 1 Inch IPS connection, and can withstand temperatures of 20 degrees F to 180 degrees F.
  • PREFERRED BY THE PRO: Our tools and plumbing supplies are perfect for both home owners and professional contractors.
Check Stock

Libraton PVC Cutter 1-5/8\

  • ...ess aluminum alloy steel. The thick 2.5mm blade used is SK5 material with precision sharped and Teflon coated. Sturdy construction and big size suitable for heavy-duty use..
  • 【Widely Application】The ratcheting PVC cutter is designed up to 1-5/8-inch (42mm) outer diameter capacity ideal for use to cut a variety of plastic pipe and tube(PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.), It is an essential cutting tool for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Efficient Working with Safety】This plastic pipe cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes. The Spring-loaded ergonomic handle provide a reliable grip and powerful bite force improve work efficiency by fast cutting, faster positioning and single stroke cuts. User can cut pipe within 5 to 20 seconds .There is a safe lock in the bottom of PEX cutting tool. You can buckle it when you don't use the cutter..
  • 【Quick Change and Replacement Blade】The PVC cutter is unique designed with Quick Change system. You can quick change the blade replacement easily within 10 seconds without any other tools. Also we provide one EXTRA replacement blade in Set. So you can have TWO blades with our PVC cutter..
Check Stock

ABN Exhaust Pipe Expander Tool - Tail Pipe Expander Exhaust Expander, Exhaust Pipe Stretcher Kit 1-5/18 to 4-1/4 Inch

  • [Increase Engine RPM]: Expanding your tailpipe with the ABN Exhaust Tube Expander Tailpipe Expander Kit to increase exhaust volume and to give you more power for your engine.
  • [Easy to Use]: Lubricate all parts of the exhaust pipe bender stretch tool and attach correct sleeve.
  • Insert pipe spread tool into pipe, connect to existing drill, and expand.
  • Pipe might need to be warmed during winter months to prevent damage while using exhaust flare tool.
  • [Expand Most Metals]: Tailpipe expander tool kit great for all types of pipes, from aluminum to stainless steel.
  • Exhaust pipe expanding tool can expand piping from 1-5/18 to 4-1/4 inches (3.3 to 10.8cm).
  • [Easy Storage]: HVAC pipe expander parts come in a plastic storage case to keep the steel and copper pipe expander kit organized.
  • [Contents]: Exhaust pipe expansion tool kit includes a 3/4-inch and 1/2-inch (1.9 and 1.3cm) shank collet expander chuck, 5 expander sleeves, and 2 packs of black rubber O ring replacements.
Check Stock

89 Pieces Rubber Flat Washer for Faucet Pipe Water Hose,Faucet Areator,Filter Hose Washers,Gas Pipe gaskets

  • Quantity:89 pieces metric O rings classification kit,there are 15 sizes..
  • Material:The white one is silicone,Transparent is rubber,Black is Nitrile Rubber..
  • Application: for Faucet Pipe Water Hose,Faucet Areator,Filter Hose Washers,Gas pipe gaskets..
  • Feature:These O rings are extensibility is good,use flexibly and easy to use..
  • 【EASY STORAGE】Comes in a Handy Plastic Organizer Case with Size Compartments..
Check Stock

Himesi DIY Professional Pipe Insulation Foam Tube 1/4',1/2',1',1-1/4',2' Outdoor Pipe Insulation Condensing Boiler Gas Insulation Pipe Heat Preservation Insulated,1pcs (Size : 2' x3/4' x6ft)

  • ✄【Material】- Rubber-plastic foam, good insulation, heat insulation, sound insulation, good vibration resistance.
  • ✄[Insulation] – Pipe insulation pipes are excellent at preventing pipe freezing and energy loss. Suitable for indoor and outdoor cold and hot water pipes, gas pipes, boiler pipes, heating pipes, steam pipes.
  • ✄[Anti-collision] – Foam tube storage can protect your pipes from bumps and scratches and is a good choice for extending the life of your pipes.
  • ✄[Weather Resistance] – Another common use of soft rubber foam is for various door sealing and window insulation.
  • ✄【Easy installation】 – Put it directly on the pipe, even if you are not a professional plumber, you can do professional water pipe insulation, saving labor and time.
Check Stock

Amazon Basics Ratcheting Plastic Pipe Cutter - 1/8-inch to 1-5/8-inch

  • Pipe-cutting tool for cutting plastic pipes and tubes ranging from 1/8 inch to 1-5/8 inches in diameter.
  • lightweight yet sturdy aluminum handle and a sharp stainless steel blade.
  • Suitable for multilayer tubing and most types of plastic, including PVC, CPVC, PP, PEX, PE, and rubber hose.
  • Ratchet drive mechanism ensures energy-efficient cutting.
  • Locking hook on the end of the handle for locking the tool securely closed when not in use.
  • Product dimensions: 8.9 x 4.4 x 1.1 inches (LxWxH).
Check Stock

Induzeug Pipe and PVC Cutter for Cutting 1-1/3\

  • 【Ergonomic Ratchet design】The professional pipe cutting adopts self-locking ratchet design. The design to cutting operation with one hand, The handle adopts the principle of leverage, which makes cutting more labor-saving. Prevent rebound design with safety of users..
  • 【Blade durable】The high-quality manganese steel blade is adopts Japanese Teflon coating process strong shearing force, high hardness, sharp blade, with anti-rust coating, increases the service life..
  • 【Ergonomic handle easy to use】The aluminum alloy material and the handle rubber wrap the handle, which increases the anti-skid and wear resistance of the handle, and also improves the comfort of use.There is a buckle at the bottom of the handle, which is convenient to open and use with one hand. The handle locks the safety lock when not in use, saving space and preventing accidental injury..
  • 【Wide range of multipurpose】The Induzeug Pipe Cutter simple to use and easy to operate, for cutting most plastic (PVC, UPVC, PPR, PEX, PE, rubber hose) and multilayer pipes. You can choose the corresponding size Pipe Cutter, cut for 1-1/3.
Check Stock

Induzeug Pipe and PVC Cutter for Cutting 1-1/3\

  • 【Ergonomic Ratchet design】The professional pipe cutting adopts self-locking ratchet design. The design to cutting operation with one hand, The handle adopts the principle of leverage, which makes cutting more labor-saving. Prevent rebound design with safety of users..
  • 【Blade durable】The high-quality manganese steel blade is adopts Japanese Teflon coating process strong shearing force, high hardness, sharp blade, with anti-rust coating, increases the service life..
  • 【[Ergonomic handle easy to use】The aluminum alloy material and the handle rubber wrap the handle, which increases the anti-skid and wear resistance of the handle, and also improves the comfort of use.There is a buckle at the bottom of the handle, which is convenient to open and use with one hand. The handle locks the safety lock when not in use, saving space and preventing accidental injury..
  • 【Wide range of multipurpose】The Induzeug Pipe Cutter simple to use and easy to operate, for cutting most plastic (PVC, UPVC, PPR, PEX, PE, rubber hose) and multilayer pipes. You can choose the corresponding size Pipe Cutter, cut for 1-1/3.
Check Stock

Flexible Drain Pipe, Angle Simple Flexible 1-1/4

  • FIX ALIGNMENT OR OTHER PLUMBING PROBLEMS: bathroom sink drain extension pipe is adjustable to fix an offset or other difficult plumbing problems. Diameter of the top connection that attaches to a tailpiece is 1-1/4"(32mm), diameter of the bottom outlet is 1-1/4"(31mm). Please kindly check the size or measure your fixture before ordering..
  • FLEXIBLE & ADJUSTABLE CORRUGATION DESIGN: flexible corrugated pipe can be easily expanded and bended to an "U", "S" or other shapes, with maximum expanded length of 33-1/4"(845mm), 16-15/16"(430mm) long when compressed..
  • PREMIUM AND SOLID CONSTRUCTION: solidly constructed of thick and hard plastic with steel wires wrapped inside for durability, rustproof and corrosion resistant, strong and durable for long term use, not easy to split..
  • DEODORANT DESIGN: inner small plate automatically opens when draining water and automatically closed to prevent backflow. Black rubber washer creates a nice seal at the connection that helps with the smell..
  • FAST DRAINING & NICE CONNECTION: diameter of the corrugated pipe is 1-1/2"(38.5mm), large enough for fast draining, not easy to get clogged, snugly connect to a sink drain with the rubber connection without leaking..
Check Stock

PVC Cutter, Cuts up to 2-1/2\ Pipe Capacity Ratcheting Cutter, One-Hand Tubing Cutte (PVC Cutter)

  • Cuts pipe volumes up to 2-1/2" (OD) with pipe thicknesses between 3-10mm.
  • Adopt ratchet drive technology and arch angle design, which greatly saves your strength.
  • For cutting most plastic pipes (PPVC, CPVC, PP-R, PEX, PE, rubber hose, etc.).
  • 2.8mm thick 4.0 manganese steel sharp blade designed for precise cutting.
  • 1/2" increments on the bottom of the handle for quick pipe measurement.
Check Stock