Top Rubber Hose Sae100 Reviews

Apache 98399065 1/4\ x 24\

  • Pre-coupled. An excellent hose for use with petroleum based hydraulic fluids within a temperature range of -40°F to +212°F. Also handles fluids like gasoline, diesel fuels, mineral oils, glycol, lubricating oils, water, etc. Coupled 1/4" solid male pipe thread on each end, hose and couplings meet or exceed SAE J517 100R2AT specifications..
  • Maximum Operating Temperature: 212 deg. F.
Check Stock

Fevone Garden Hose 100ft Heavy Duty Water Hose 5/8 Garden Hose Flexible Lightweight Garden Hoses 100 ft, 3/4 Solid Brass Fittings

  • This garden hose kinks less than a regular hose, mainly because, instead of being made of unyielding plastic or rubber, this hose is made from high quality material of hybrid polymer that makes the hose sturdy and flexible, the decently flexibility helps a lot with kinking less. This 100 foot garden hose is flexible enough for no-fuss spooling onto or off of your hose reel, it's very easy to coil up.
  • This 100ft hose has high quality, standard - size, 3/4 - inch, solid brass connectors which smoothly and easily screw on and off of all of your hose bibbs (AKA outdoor faucets), this brass fitting stands up well to corrosion. These fittings are well made and seal tight, the female end pre-built with a rubber washer avoids leaking, the male end has just enough threads to firmly connect hose nozzle and sprayer.
  • This heavy duty garden hose has a nice sleeve cover at each end for gripping, this reinforced plastic cover adds more protection for the most vulnerable part of hose, in addition, this protective sleeve helps the hose kink less at the connection and keeps the hose from pinching off if it turns abruptly at the faucet or attachment end.
  • This 100' hose with a larger 5/8" size is a heavy duty water hose, made of 3-layers thick material that's still very fl....
Check Stock

EVIL ENERGY 3/8 Fuel Hose Line Push Lock NBR Rubber SAE 30R7 25FT 300PSI

  • Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 3.9inch(100mm)..
  • Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc..
  • Application: SAE 30R7 rubber fuel line widely used in fuel system,oil cooling,steam emission,please check the pressure of application before perchase..
  • EVIL ENERGY provide 25ft 3/8inch fuel hose 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message..
Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 16 Clamping Range 3/4 Inch to 1-1/2 Inch (19mm-38mm) for Automotive Plumbing, 3/4'', 1'', 1 1/4'' Hose Clamps

  • Premium Materials: WINL SAE 16 hose clamps of 19mm-38mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size #16 hose clamps have clamping range from 3/4 inch to 1-1/2 inch (from 19mm to 38mm), great for hose or pipes within this range, perfect as 3/4 inch hose clamps,7/8 inch hose clamps,1 inch hose clamps,1 1/5 inch hose clamps, 1 1/4 inch hose clamps etc. . The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 16 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without ....
Check Stock

Fevone Garden Hose 100 ft Heavy Duty Water Hose 5/8 Garden Hose 100 feet Flexible Lightweight Garden Hose, Lawn & Garden Watering Equipment, 3/4 Solid Fittings, Drinking Water Safe

  • This garden hose kinks less than a regular hose, mainly because, instead of being made of unyielding plastic or rubber, this hose is made from high quality material of hybrid polymer that makes the hose sturdy and flexible, the decently flexibility helps a lot with kinking less. This 100 foot garden hose is flexible enough for no-fuss spooling onto or off of your hose reel, it's very easy to coil up.
  • This 100ft hose has high quality, standard - size, 3/4 - inch, solid aluminum connectors which smoothly and easily screw on and off of all of your hose bibbs (AKA outdoor faucets), this anodized aluminium stands up well to corrosion. These fittings are well made and seal tight, the female end pre-built with a rubber washer avoids leaking, the male end has just enough threads to firmly connect hose nozzle and sprayer.
  • This heavy duty garden hose has a nice sleeve cover at each end for gripping, this renforced plastic cover adds more protection for the most vulnerable part of hose, in addition, this protective sleeve helps the hose kink less at the the connection and keeps the hose from pinching off if it turns abruptly at the faucet or attachment end.
  • This 100' hose with a larger 5/8" size is a heavy duty water hose, made of 4-layers thick material that's st....
Check Stock

Sunsong 3401230 Power Steering Pressure Hose Assembly (Honda)

  • Pressure Hoses exceed original equipment performance standards (SAE J188) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life.
  • All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.
  • Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
  • Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose.
  • Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements.
Check Stock

Sunsong 3402221 Power Steering Pressure Line Hose Assembly

  • Pressure Hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life.
  • All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.
  • Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
  • Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose.
  • Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements.
Check Stock

Sunsong 3401298 Power Steering Pressure Line Hose Assembly

  • Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose.
  • Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements.
Check Stock

LEIMO KPARTS AC Diagnostic Manifold Gauge Set for Freon Charging, Fits R410A R22 R404 Refrigerants, 1/4' Thread Hose Set 60' with 2 Quick Coupler-r410a Manifold Gauge Set

  • AC A/C Manifold Gauge Set —- 3-way air conditioning diagnostic manifold gauge set for R404a, R410a, R22 refrigerants. Designed for AC charging, diagnostic check and recovery work.
  • Necessary tools for HVAC, car air condition maintenance and coolant or Freon adding.Widely used for household air conditioning units.
  •  Refrigerator, air conditioner and industrial refrigeration equipment..
  • Easy to operate and install, strong sealing for durability and safety.The solid brass gauge threaded connector and hose fitting is different from the brass plated construction, corrosion-resistant and rustless——ideal for professional auto mechanics. .
  • Freon Charging Hose 4000PSI Burst 800PSI Max W.P. each hose is approx. 5ft ( 60 inches / 152 cm) with 1/4″ SAE fitting——HIGH PRESSURE HOSES with ¼” SAE standard fittings using the highest technology rubber materials giving the hoses the most flexibility and reducing the risk of kinking.
  • Include 3-PC 5FT extra long Freon charging hose, 3 color for easily recognition, red for high pressure, blue for low pressure, yellow for refrigerant bottle –r410a manifold gauge set.
Check Stock

uxcell Refrigerant Charging Hose, 1/4 SAE Thread 2.95Ft Length 500PSI Tube, for Home Air Conditioner Refrigeration Maintenance, Yellow

  • [Material] – Rubber hose and iron connector with copper plating offer flexibility and abrasion resistance ensuring long life and dependability..
  • [Reliable Connection] – Strong six-sided crimp provides a secure, reliable connection between the hose and barb – even at maximum pressure(Notice:Please also note that our 1/4SAE Thread only fits for the 7/16-20UNF thread.).
  • [Easy to Install] – 45 degrees bend on the end for convenient access to the adapter on the system. Deep knurling on the Coupler nuts provides a positive grip and enables quick finger-tightening.
  • [Application] – Great for testing or repairing, such as home or HVAC air conditioner, ductless mini-split AC systems, refrigerator, refrigeration charging, vacuum pump, Pressure gauge, and so on..
Check Stock

BACOENG Vacuum Pump & Manifold Gauge Set - HVAC A/C Refrigeration Kit - Diagnostic R12 R22 R134a R410A - w/Case

  • Gauge Set — 2 Valve Manifolds with Sight-glass & 1/4″ SAE fittings anodized aluminum block body, oversized sight-glass for easy viewing the refrigerant flow high quality gauge and high accuracy of reading.
  • Vacuum Pump – Newly Designed Compact Vacuum Pump, Portable and Stronger. Flow rate: 3.6CFM Power: 1/4HP Ultimate Vacuum: 0.8Pa.
  • Accessory–3 × 4FT Blue Red Yellow Refrigrant Hose,2 × 1/4″ SAE Male to 5/16″ SAE Female Adapters（R410a）, 1 × Toolkit, 12oz Vacuum Oil, 1 × Manual for Pump and Gauge.
  • Hose– All hose are complied with SAE-J2196 standard standard. Hose Working pressure: 800PSI-4000PSI Acceptable refrigerant: CFC HCFC and HFC.
  • 【Attention】- Ideal for R12 R22 R410A R407C. NEED additional high & low pressure side quick couplers B085XHTS1W if you need to repair R134a vehicle A/C system..
Check Stock

R134A R410A R12 R22 Refrigeration Charging Hose Set with Ball Valve 3 Color Coded Hoses/w Ball Valve 1/4 SAE Thread Connector for Air Condition Refrigeration Charging Tools AC HVAC Maintenance Kit

  • WIDE APPLICATION --- Standard refrigeration charging hoses with 1/4" SAE male and female thread for refrigerants R134A, R22, R12, R502, R404..
  • HIGH WROKING PRESSURE --- 7" length ball valve hvac charging hose completed with solid brass manual shut-off ball valve. Rated working pressure: 3000....
  • PREFECT DESIGN --- HVAC hoses with ball valves designed to meet standard 1/4 inch SAE female refrigerant charging hoses set with shut off of red, blue....
  • EASY INSTALLATION --- R22 charging hose and ball valve set design with 45 degree angle on the service port site for easier access. Can be operated....
  • PREMIUM QUALITY --- Refrigerant hose made of high-quality brass alloy and rubber, last long. Strong sealing for durability and safety. Necessary tools....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • ...ump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Please note, there is no pressure relief valve and drain hose, please wrap cloth around hose connection before relieving pressure from fuel line and removing testing components..
  • CHECK FUEL INJECTOR PUMP PRESSURE: The pressure gauge is designed for checking the fuel injection pump pressure easily and quickly. You can compare the pressure value to the manufacturer's recommended reference range, aid to diagnose gasoline engine fuel system. Low fuel pressure can be caused by kink/leak/clog on inlet supply side components, a bad fuel pump or fuel regulator, low tank pressure. High fuel pressure may caused by a defective fuel pressure regulator or kinked outlet return line..
  • SATISFACTORY CUSTOMER SERVICE: 30 days ....
Check Stock