Top Rubber Fuel Oil Hose Reviews

EVIL ENERGY 6AN 90 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • ...petition applications where reduced weight is needed..
  • 6AN 90 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose ..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

EVIL ENERGY 6AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black 2PCS

  • The female AN6 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. Package: 2 PCS..
  • 6AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our swivel fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose, E85, rubber hose..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • ...ort on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color coded scale, helps to monitor vehicles' fuel pressure easily. Equip with pressure relief valve and 16" drain hose for safer pressure discharge and fuel recovery. Reliable nylon resin hose is resistant to fuel, wear and corrosion.
  • CHECK FUEL INJECTOR PUMP PRESSURE: Proper fuel pressure is vital for engine operation and performance. No matter higher or lower fuel pressure can cause many engine problems and both require great attention. Higher value may result from a bad oil pressure regulator or curved outlet oil return line. Lower one may due to internal components' kink/breakage/clog, bad fuel pump, regulator or low fuel tank pressure. You can troubleshoot possible problems based on the vehicle manufacturer's user manual.
  • SATISFACTORY CUSTOMER SERVICE: This fuel injection pump pressure test kit helps to find most auto fuel system issues, it is a must have kit for DIYer or professional m....
Check Stock

4Pcs 6AN Straight Swivel Hose End Fitting for Fuel Oil Line Aluminum Black (Straight)

  • Fit for all stainless braided and nylon braided hose,Not fit for PTFE fuel line and rubber fuel line..
  • Material: T-6061 Lightweight Aluminum Alloy, Anodized Finish for Durability.
  • Application: Universal,such as:Oil/ Fuel/ Water/ Fluid/ Air Line.
  • Swivel design for easy assembly,The adjustable AN wrench is highly recommended..
  • Package include:4X Straight Swivel Fuel Hose End.
Check Stock

MOTAFAR 6AN 45 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • 6AN 45 degree hose end fitting is suitable for all oil/ fuel/ water/ fluid/ air line, fit all stainless braided and nylon braided hose, can't fit PTFE fuel line and rubber fuel line.
  • Max working pressure is 1000psi, working temperature range is -65℉ to 252℉ (-53℃ to 122℃).
  • Designed for smooth flow, easy assembly, completely reusable, just disassemble and put onto another hose.
  • No leakage under high pressure and temperature.
  • Black anodized for durability, great appearance, and anti-corrosion.
Check Stock

EVIL ENERGY 6AN Fuel Line Kit,AN6 Braided Nylon Fuel Hose CPE 10FT Black&Red

  • [Size] ID of 6an fuel hose:0.34"(8.63mm),OD:0.54"(13.71mm).Length:10ft..
  • [Parameter] Working pressure:500psi,burst pressure:2000psi.
  • Temperature range:-40°F to 257°F(-40°C to 125°C).
  • [Application] 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc..
  • [Material] Made of CPE synthetic rubber and nylon braided..
  • [Warranty] EVIL ENERGY provide 6an fuel line hose fitting kit 3-month warranty.Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

3/8 6AN 20FT Fuel Line Hose Kit, Nylon Stainless Steel Braided Fuel Line Oil/Gas/Fuel Hose End Fitting Hose with 10PCS Swivel Fuel Hose Fitting Adapter Kit - Black

  • Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications..
  • Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes..
  • Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
  • The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
  • Safety Features For Your Protection: Fuel Hose: Size(ID): 6AN, Length: 20FT, Working Temperature: -100℉ to 500℉ (-73°C to + 260°C) , Pressure Tolerance: 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance..
  • Package Includes: 1 x 6AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak..
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

  • ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
  • ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
  • ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
  • ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

uxcell 2pcs Lubricating Oil Hose 3mm(1/8-inch) ID x 5mm(3/16-inch) OD 3.3ft Water Tube Black Rubber Tubing

  • 【APPLICATION】- Lubricating Line Hose mainly used to transport lubricating oil.
  • 【Advantage】- Lubricating Hose has Oil resistant, wear-resistant, aging resistant, soft, lightweight, good bending performance, smooth appearance.
  • 【FEATURE】- Lubricating Tube Measures 0.12-inches inside diameter by 0.2-inches outside diameter by 3.28-feet total length. 0.04" thin tube wall providing higher flow rates and working pressure.
  • 【Rubber material】- Lubricating Pipe made in Rubber, which has the characteristics of high-temperature resistance, oil resistance..
  • 【Please Note】- The hose can not transport fuel oil on equipment.
Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

Fuel /Oil Pressure Test Kit with Billet Aluminum Fuel /Oil Filter Cap, Fuel Pressure Gauge and Hose Kit for 2003-2007 Ford 6.0L Power Stroke Diesel

  • FITMENT -- 2003-2007 Ford F-Series（F250 F350 F450 F550）, E-Series, Excursion with 6.0L fit for Powerstroke Diesel. Direct-fit replace OEM part number 3C3Z-9G270-BA..
  • MATERIAL -- Made of high quality rubber with reinforced treated, both the inner and outer rubber is design for RMA-A oil resistance and permeability resistance. What’s more, the billet aluminum fuel filter cap is of the highest quality materials, ensures an unparalleled long lifespan..
  • FUNCTION -- Allow for accurate checking of both oil and fuel pressure. The hose has a screw-on fitting that will not leak fuel. This makes it easy to remove the cap after testing, or remove the line and leave cap on the vehicle. The liquid filled gauge and extended hose allow for the operator to drive the vehicle and read the gauge while fuel is under operating pressure..
  • BENEFITS -- Great looks and solid construction make this an outstanding upgrade over the plastic OEM cap..
  • 100% SATISFACTION GUARANTEE -- If you're not 100% satisfied with our Fuel Pressure Test Kit, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty..
Check Stock

Heavy-Duty Gas Pressure Washer, 3500PSI at 2.6GPM Power Washer, 50-feet Hose,Portable, Industrial Style，Black

  • 5 quick connect nozzle tips: 0°, 15°, 25°, 45° and soap. Perfect for cleaning cars, yards, garages, walls, trucks and roofs..
  • 13" big tires: We use very good quality pneumatic rubber tires, so you can easily move the washing machine in the garden, making it flat. There are obvious tooth grooves on the outside of the tire. You can rest assured that it will not wear out completely after 2 years of use..
  • 【Tips for you】M22 pressure hose, SAE 10W-30 oil, fuel less than 10% ethanol .All pressure washers are 100% functionally tested at the factory and may contain minimal residual fuel/oil or fuel smell. Please check for sufficient oil (0.2 gallon) every time you use it to ensure the washing machine runs efficiently.This item is non-returnable, if the item arrives damaged or defective, please contact the after-sales address, you can ask for a partial refund or replacement parts..
Check Stock